linux-toradex.git/drivers/net/wireless, branch v6.4-rc2 Linux kernel for Apalis and Colibri modules Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core 2023-04-27T18:53:57+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-04-27T18:53:57+00:00 556eb8b79190151506187bf0b16dda423c34d9a8 Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ... 
Pull driver core updates from Greg KH:
 "Here is the large set of driver core changes for 6.4-rc1.

  Once again, a busy development cycle, with lots of changes happening
  in the driver core in the quest to be able to move "struct bus" and
  "struct class" into read-only memory, a task now complete with these
  changes.

  This will make the future rust interactions with the driver core more
  "provably correct" as well as providing more obvious lifetime rules
  for all busses and classes in the kernel.

  The changes required for this did touch many individual classes and
  busses as many callbacks were changed to take const * parameters
  instead. All of these changes have been submitted to the various
  subsystem maintainers, giving them plenty of time to review, and most
  of them actually did so.

  Other than those changes, included in here are a small set of other
  things:

   - kobject logging improvements

   - cacheinfo improvements and updates

   - obligatory fw_devlink updates and fixes

   - documentation updates

   - device property cleanups and const * changes

   - firwmare loader dependency fixes.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
  device property: make device_property functions take const device *
  driver core: update comments in device_rename()
  driver core: Don't require dynamic_debug for initcall_debug probe timing
  firmware_loader: rework crypto dependencies
  firmware_loader: Strip off \n from customized path
  zram: fix up permission for the hot_add sysfs file
  cacheinfo: Add use_arch[|_cache]_info field/function
  arch_topology: Remove early cacheinfo error message if -ENOENT
  cacheinfo: Check cache properties are present in DT
  cacheinfo: Check sib_leaf in cache_leaves_are_shared()
  cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
  cacheinfo: Add arm64 early level initializer implementation
  cacheinfo: Add arch specific early level initializer
  tty: make tty_class a static const structure
  driver core: class: remove struct class_interface * from callbacks
  driver core: class: mark the struct class in struct class_interface constant
  driver core: class: make class_register() take a const *
  driver core: class: mark class_release() as taking a const *
  driver core: remove incorrect comment for device_create*
  MIPS: vpe-cmp: remove module owner pointer from struct class usage.
  ...
Merge tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi 2023-04-27T18:02:26+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-04-27T18:02:26+00:00 fc2e58b8b7c94b8fe23977775550de00472f6a74 Pull spi updates from Mark Brown: "A fairly standard release for SPI with the exception of a change to the API for specifying chip selects done in preparation for supporting devices with more than one chip select, this required some mechanical changes throughout the tree which have been cooking in -next happily for a while. There's also a new API to allow us to support TPM chips on half duplex controllers. Summary: - Refactoring in preparation for supporting multiple chip selects for a single device, needed by some flash devices, which required a change in the SPI device API visible throughout the tree - Support for hardware assisted interaction with SPI TPMs on half duplex controllers, implemented on nVidia Tedra210 QuadSPI - Optimisation for large transfers on fsl-cpm devices - Cleanups around device property use which fix some sisues with fwnode - Use of both void remove() and devm_platform_.*ioremap_resource() - Support for AMD Pensando Elba, Amlogic A1, Cadence device mode, Intel MetorLake-S and StarFive J7110 QuadSPI" * tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (185 commits) spi: bcm63xx: use macro DEFINE_SIMPLE_DEV_PM_OPS spi: tegra210-quad: Enable TPM wait polling spi: Add TPM HW flow flag spi: bcm63xx: remove PM_SLEEP based conditional compilation spi: cadence-quadspi: use macro DEFINE_SIMPLE_DEV_PM_OPS spi: spi-cadence: Add support for Slave mode spi: spi-cadence: Switch to spi_controller structure spi: cadence-quadspi: fix suspend-resume implementations spi: dw: Add support for AMD Pensando Elba SoC spi: dw: Add AMD Pensando Elba SoC SPI Controller spi: cadence-quadspi: Disable the SPI before reconfiguring spi: cadence-quadspi: Update the read timeout based on the length spi: spi-loopback-test: Add module param for iteration length spi: add support for Amlogic A1 SPI Flash Controller dt-bindings: spi: add Amlogic A1 SPI controller spi: fsl-spi: No need to check transfer length versus word size spi: fsl-spi: Change mspi_apply_cpu_mode_quirks() to void spi: fsl-cpm: Use 16 bit mode for large transfers with even size spi: fsl-spi: Re-organise transfer bits_per_word adaptation spi: fsl-spi: Fix CPM/QE mode Litte Endian ... 
Pull spi updates from Mark Brown:
 "A fairly standard release for SPI with the exception of a change to
  the API for specifying chip selects done in preparation for supporting
  devices with more than one chip select, this required some mechanical
  changes throughout the tree which have been cooking in -next happily
  for a while.

  There's also a new API to allow us to support TPM chips on half duplex
  controllers.

  Summary:

   - Refactoring in preparation for supporting multiple chip selects for
     a single device, needed by some flash devices, which required a
     change in the SPI device API visible throughout the tree

   - Support for hardware assisted interaction with SPI TPMs on half
     duplex controllers, implemented on nVidia Tedra210 QuadSPI

   - Optimisation for large transfers on fsl-cpm devices

   - Cleanups around device property use which fix some sisues with
     fwnode

   - Use of both void remove() and devm_platform_.*ioremap_resource()

   - Support for AMD Pensando Elba, Amlogic A1, Cadence device mode,
     Intel MetorLake-S and StarFive J7110 QuadSPI"

* tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (185 commits)
  spi: bcm63xx: use macro DEFINE_SIMPLE_DEV_PM_OPS
  spi: tegra210-quad: Enable TPM wait polling
  spi: Add TPM HW flow flag
  spi: bcm63xx: remove PM_SLEEP based conditional compilation
  spi: cadence-quadspi: use macro DEFINE_SIMPLE_DEV_PM_OPS
  spi: spi-cadence: Add support for Slave mode
  spi: spi-cadence: Switch to spi_controller structure
  spi: cadence-quadspi: fix suspend-resume implementations
  spi: dw: Add support for AMD Pensando Elba SoC
  spi: dw: Add AMD Pensando Elba SoC SPI Controller
  spi: cadence-quadspi: Disable the SPI before reconfiguring
  spi: cadence-quadspi: Update the read timeout based on the length
  spi: spi-loopback-test: Add module param for iteration length
  spi: add support for Amlogic A1 SPI Flash Controller
  dt-bindings: spi: add Amlogic A1 SPI controller
  spi: fsl-spi: No need to check transfer length versus word size
  spi: fsl-spi: Change mspi_apply_cpu_mode_quirks() to void
  spi: fsl-cpm: Use 16 bit mode for large transfers with even size
  spi: fsl-spi: Re-organise transfer bits_per_word adaptation
  spi: fsl-spi: Fix CPM/QE mode Litte Endian
  ...
Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next 2023-04-26T23:07:23+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-04-26T23:07:23+00:00 6e98b09da931a00bf4e0477d0fa52748bf28fcce Pull networking updates from Paolo Abeni: "Core: - Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the default value allows for better BIG TCP performances - Reduce compound page head access for zero-copy data transfers - RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible - Threaded NAPI improvements, adding defer skb free support and unneeded softirq avoidance - Address dst_entry reference count scalability issues, via false sharing avoidance and optimize refcount tracking - Add lockless accesses annotation to sk_err[_soft] - Optimize again the skb struct layout - Extends the skb drop reasons to make it usable by multiple subsystems - Better const qualifier awareness for socket casts BPF: - Add skb and XDP typed dynptrs which allow BPF programs for more ergonomic and less brittle iteration through data and variable-sized accesses - Add a new BPF netfilter program type and minimal support to hook BPF programs to netfilter hooks such as prerouting or forward - Add more precise memory usage reporting for all BPF map types - Adds support for using {FOU,GUE} encap with an ipip device operating in collect_md mode and add a set of BPF kfuncs for controlling encap params - Allow BPF programs to detect at load time whether a particular kfunc exists or not, and also add support for this in light skeleton - Bigger batch of BPF verifier improvements to prepare for upcoming BPF open-coded iterators allowing for less restrictive looping capabilities - Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF programs to NULL-check before passing such pointers into kfunc - Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in local storage maps - Enable RCU semantics for task BPF kptrs and allow referenced kptr tasks to be stored in BPF maps - Add support for refcounted local kptrs to the verifier for allowing shared ownership, useful for adding a node to both the BPF list and rbtree - Add BPF verifier support for ST instructions in convert_ctx_access() which will help new -mcpu=v4 clang flag to start emitting them - Add ARM32 USDT support to libbpf - Improve bpftool's visual program dump which produces the control flow graph in a DOT format by adding C source inline annotations Protocols: - IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value indicates the provenance of the IP address - IPv6: optimize route lookup, dropping unneeded R/W lock acquisition - Add the handshake upcall mechanism, allowing the user-space to implement generic TLS handshake on kernel's behalf - Bridge: support per-{Port, VLAN} neighbor suppression, increasing resilience to nodes failures - SCTP: add support for Fair Capacity and Weighted Fair Queueing schedulers - MPTCP: delay first subflow allocation up to its first usage. This will allow for later better LSM interaction - xfrm: Remove inner/outer modes from input/output path. These are not needed anymore - WiFi: - reduced neighbor report (RNR) handling for AP mode - HW timestamping support - support for randomized auth/deauth TA for PASN privacy - per-link debugfs for multi-link - TC offload support for mac80211 drivers - mac80211 mesh fast-xmit and fast-rx support - enable Wi-Fi 7 (EHT) mesh support Netfilter: - Add nf_tables 'brouting' support, to force a packet to be routed instead of being bridged - Update bridge netfilter and ovs conntrack helpers to handle IPv6 Jumbo packets properly, i.e. fetch the packet length from hop-by-hop extension header. This is needed for BIT TCP support - The iptables 32bit compat interface isn't compiled in by default anymore - Move ip(6)tables builtin icmp matches to the udptcp one. This has the advantage that icmp/icmpv6 match doesn't load the iptables/ip6tables modules anymore when iptables-nft is used - Extended netlink error report for netdevice in flowtables and netdev/chains. Allow for incrementally add/delete devices to netdev basechain. Allow to create netdev chain without device Driver API: - Remove redundant Device Control Error Reporting Enable, as PCI core has already error reporting enabled at enumeration time - Move Multicast DB netlink handlers to core, allowing devices other then bridge to use them - Allow the page_pool to directly recycle the pages from safely localized NAPI - Implement lockless TX queue stop/wake combo macros, allowing for further code de-duplication and sanitization - Add YNL support for user headers and struct attrs - Add partial YNL specification for devlink - Add partial YNL specification for ethtool - Add tc-mqprio and tc-taprio support for preemptible traffic classes - Add tx push buf len param to ethtool, specifies the maximum number of bytes of a transmitted packet a driver can push directly to the underlying device - Add basic LED support for switch/phy - Add NAPI documentation, stop relaying on external links - Convert dsa_master_ioctl() to netdev notifier. This is a preparatory work to make the hardware timestamping layer selectable by user space - Add transceiver support and improve the error messages for CAN-FD controllers New hardware / drivers: - Ethernet: - AMD/Pensando core device support - MediaTek MT7981 SoC - MediaTek MT7988 SoC - Broadcom BCM53134 embedded switch - Texas Instruments CPSW9G ethernet switch - Qualcomm EMAC3 DWMAC ethernet - StarFive JH7110 SoC - NXP CBTX ethernet PHY - WiFi: - Apple M1 Pro/Max devices - RealTek rtl8710bu/rtl8188gu - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset - Bluetooth: - Realtek RTL8821CS, RTL8851B, RTL8852BS - Mediatek MT7663, MT7922 - NXP w8997 - Actions Semi ATS2851 - QTI WCN6855 - Marvell 88W8997 - Can: - STMicroelectronics bxcan stm32f429 Drivers: - Ethernet NICs: - Intel (1G, icg): - add tracking and reporting of QBV config errors - add support for configuring max SDU for each Tx queue - Intel (100G, ice): - refactor mailbox overflow detection to support Scalable IOV - GNSS interface optimization - Intel (i40e): - support XDP multi-buffer - nVidia/Mellanox: - add the support for linux bridge multicast offload - enable TC offload for egress and engress MACVLAN over bond - add support for VxLAN GBP encap/decap flows offload - extend packet offload to fully support libreswan - support tunnel mode in mlx5 IPsec packet offload - extend XDP multi-buffer support - support MACsec VLAN offload - add support for dynamic msix vectors allocation - drop RX page_cache and fully use page_pool - implement thermal zone to report NIC temperature - Netronome/Corigine: - add support for multi-zone conntrack offload - Solarflare/Xilinx: - support offloading TC VLAN push/pop actions to the MAE - support TC decap rules - support unicast PTP - Other NICs: - Broadcom (bnxt): enforce software based freq adjustments only on shared PHC NIC - RealTek (r8169): refactor to addess ASPM issues during NAPI poll - Micrel (lan8841): add support for PTP_PF_PEROUT - Cadence (macb): enable PTP unicast - Engleder (tsnep): add XDP socket zero-copy support - virtio-net: implement exact header length guest feature - veth: add page_pool support for page recycling - vxlan: add MDB data path support - gve: add XDP support for GQI-QPL format - geneve: accept every ethertype - macvlan: allow some packets to bypass broadcast queue - mana: add support for jumbo frame - Ethernet high-speed switches: - Microchip (sparx5): Add support for TC flower templates - Ethernet embedded switches: - Broadcom (b54): - configure 6318 and 63268 RGMII ports - Marvell (mv88e6xxx): - faster C45 bus scan - Microchip: - lan966x: - add support for IS1 VCAP - better TX/RX from/to CPU performances - ksz9477: add ETS Qdisc support - ksz8: enhance static MAC table operations and error handling - sama7g5: add PTP capability - NXP (ocelot): - add support for external ports - add support for preemptible traffic classes - Texas Instruments: - add CPSWxG SGMII support for J7200 and J721E - Intel WiFi (iwlwifi): - preparation for Wi-Fi 7 EHT and multi-link support - EHT (Wi-Fi 7) sniffer support - hardware timestamping support for some devices/firwmares - TX beacon protection on newer hardware - Qualcomm 802.11ax WiFi (ath11k): - MU-MIMO parameters support - ack signal support for management packets - RealTek WiFi (rtw88): - SDIO bus support - better support for some SDIO devices (e.g. MAC address from efuse) - RealTek WiFi (rtw89): - HW scan support for 8852b - better support for 6 GHz scanning - support for various newer firmware APIs - framework firmware backwards compatibility - MediaTek WiFi (mt76): - P2P support - mesh A-MSDU support - EHT (Wi-Fi 7) support - coredump support" * tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits) net: phy: hide the PHYLIB_LEDS knob net: phy: marvell-88x2222: remove unnecessary (void*) conversions tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp. net: amd: Fix link leak when verifying config failed net: phy: marvell: Fix inconsistent indenting in led_blink_set lan966x: Don't use xdp_frame when action is XDP_TX tsnep: Add XDP socket zero-copy TX support tsnep: Add XDP socket zero-copy RX support tsnep: Move skb receive action to separate function tsnep: Add functions for queue enable/disable tsnep: Rework TX/RX queue initialization tsnep: Replace modulo operation with mask net: phy: dp83867: Add led_brightness_set support net: phy: Fix reading LED reg property drivers: nfc: nfcsim: remove return value check of `dev_dir` net: phy: dp83867: Remove unnecessary (void*) conversions net: ethtool: coalesce: try to make user settings stick twice net: mana: Check if netdev/napi_alloc_frag returns single page net: mana: Rename mana_refill_rxoob and remove some empty lines net: veth: add page_pool stats ... 
Pull networking updates from Paolo Abeni:
 "Core:

   - Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
     default value allows for better BIG TCP performances

   - Reduce compound page head access for zero-copy data transfers

   - RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
     possible

   - Threaded NAPI improvements, adding defer skb free support and
     unneeded softirq avoidance

   - Address dst_entry reference count scalability issues, via false
     sharing avoidance and optimize refcount tracking

   - Add lockless accesses annotation to sk_err[_soft]

   - Optimize again the skb struct layout

   - Extends the skb drop reasons to make it usable by multiple
     subsystems

   - Better const qualifier awareness for socket casts

  BPF:

   - Add skb and XDP typed dynptrs which allow BPF programs for more
     ergonomic and less brittle iteration through data and
     variable-sized accesses

   - Add a new BPF netfilter program type and minimal support to hook
     BPF programs to netfilter hooks such as prerouting or forward

   - Add more precise memory usage reporting for all BPF map types

   - Adds support for using {FOU,GUE} encap with an ipip device
     operating in collect_md mode and add a set of BPF kfuncs for
     controlling encap params

   - Allow BPF programs to detect at load time whether a particular
     kfunc exists or not, and also add support for this in light
     skeleton

   - Bigger batch of BPF verifier improvements to prepare for upcoming
     BPF open-coded iterators allowing for less restrictive looping
     capabilities

   - Rework RCU enforcement in the verifier, add kptr_rcu and enforce
     BPF programs to NULL-check before passing such pointers into kfunc

   - Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
     in local storage maps

   - Enable RCU semantics for task BPF kptrs and allow referenced kptr
     tasks to be stored in BPF maps

   - Add support for refcounted local kptrs to the verifier for allowing
     shared ownership, useful for adding a node to both the BPF list and
     rbtree

   - Add BPF verifier support for ST instructions in
     convert_ctx_access() which will help new -mcpu=v4 clang flag to
     start emitting them

   - Add ARM32 USDT support to libbpf

   - Improve bpftool's visual program dump which produces the control
     flow graph in a DOT format by adding C source inline annotations

  Protocols:

   - IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
     indicates the provenance of the IP address

   - IPv6: optimize route lookup, dropping unneeded R/W lock acquisition

   - Add the handshake upcall mechanism, allowing the user-space to
     implement generic TLS handshake on kernel's behalf

   - Bridge: support per-{Port, VLAN} neighbor suppression, increasing
     resilience to nodes failures

   - SCTP: add support for Fair Capacity and Weighted Fair Queueing
     schedulers

   - MPTCP: delay first subflow allocation up to its first usage. This
     will allow for later better LSM interaction

   - xfrm: Remove inner/outer modes from input/output path. These are
     not needed anymore

   - WiFi:
      - reduced neighbor report (RNR) handling for AP mode
      - HW timestamping support
      - support for randomized auth/deauth TA for PASN privacy
      - per-link debugfs for multi-link
      - TC offload support for mac80211 drivers
      - mac80211 mesh fast-xmit and fast-rx support
      - enable Wi-Fi 7 (EHT) mesh support

  Netfilter:

   - Add nf_tables 'brouting' support, to force a packet to be routed
     instead of being bridged

   - Update bridge netfilter and ovs conntrack helpers to handle IPv6
     Jumbo packets properly, i.e. fetch the packet length from
     hop-by-hop extension header. This is needed for BIT TCP support

   - The iptables 32bit compat interface isn't compiled in by default
     anymore

   - Move ip(6)tables builtin icmp matches to the udptcp one. This has
     the advantage that icmp/icmpv6 match doesn't load the
     iptables/ip6tables modules anymore when iptables-nft is used

   - Extended netlink error report for netdevice in flowtables and
     netdev/chains. Allow for incrementally add/delete devices to netdev
     basechain. Allow to create netdev chain without device

  Driver API:

   - Remove redundant Device Control Error Reporting Enable, as PCI core
     has already error reporting enabled at enumeration time

   - Move Multicast DB netlink handlers to core, allowing devices other
     then bridge to use them

   - Allow the page_pool to directly recycle the pages from safely
     localized NAPI

   - Implement lockless TX queue stop/wake combo macros, allowing for
     further code de-duplication and sanitization

   - Add YNL support for user headers and struct attrs

   - Add partial YNL specification for devlink

   - Add partial YNL specification for ethtool

   - Add tc-mqprio and tc-taprio support for preemptible traffic classes

   - Add tx push buf len param to ethtool, specifies the maximum number
     of bytes of a transmitted packet a driver can push directly to the
     underlying device

   - Add basic LED support for switch/phy

   - Add NAPI documentation, stop relaying on external links

   - Convert dsa_master_ioctl() to netdev notifier. This is a
     preparatory work to make the hardware timestamping layer selectable
     by user space

   - Add transceiver support and improve the error messages for CAN-FD
     controllers

  New hardware / drivers:

   - Ethernet:
      - AMD/Pensando core device support
      - MediaTek MT7981 SoC
      - MediaTek MT7988 SoC
      - Broadcom BCM53134 embedded switch
      - Texas Instruments CPSW9G ethernet switch
      - Qualcomm EMAC3 DWMAC ethernet
      - StarFive JH7110 SoC
      - NXP CBTX ethernet PHY

   - WiFi:
      - Apple M1 Pro/Max devices
      - RealTek rtl8710bu/rtl8188gu
      - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset

   - Bluetooth:
      - Realtek RTL8821CS, RTL8851B, RTL8852BS
      - Mediatek MT7663, MT7922
      - NXP w8997
      - Actions Semi ATS2851
      - QTI WCN6855
      - Marvell 88W8997

   - Can:
      - STMicroelectronics bxcan stm32f429

  Drivers:

   - Ethernet NICs:
      - Intel (1G, icg):
         - add tracking and reporting of QBV config errors
         - add support for configuring max SDU for each Tx queue
      - Intel (100G, ice):
         - refactor mailbox overflow detection to support Scalable IOV
         - GNSS interface optimization
      - Intel (i40e):
         - support XDP multi-buffer
      - nVidia/Mellanox:
         - add the support for linux bridge multicast offload
         - enable TC offload for egress and engress MACVLAN over bond
         - add support for VxLAN GBP encap/decap flows offload
         - extend packet offload to fully support libreswan
         - support tunnel mode in mlx5 IPsec packet offload
         - extend XDP multi-buffer support
         - support MACsec VLAN offload
         - add support for dynamic msix vectors allocation
         - drop RX page_cache and fully use page_pool
         - implement thermal zone to report NIC temperature
      - Netronome/Corigine:
         - add support for multi-zone conntrack offload
      - Solarflare/Xilinx:
         - support offloading TC VLAN push/pop actions to the MAE
         - support TC decap rules
         - support unicast PTP

   - Other NICs:
      - Broadcom (bnxt): enforce software based freq adjustments only on
        shared PHC NIC
      - RealTek (r8169): refactor to addess ASPM issues during NAPI poll
      - Micrel (lan8841): add support for PTP_PF_PEROUT
      - Cadence (macb): enable PTP unicast
      - Engleder (tsnep): add XDP socket zero-copy support
      - virtio-net: implement exact header length guest feature
      - veth: add page_pool support for page recycling
      - vxlan: add MDB data path support
      - gve: add XDP support for GQI-QPL format
      - geneve: accept every ethertype
      - macvlan: allow some packets to bypass broadcast queue
      - mana: add support for jumbo frame

   - Ethernet high-speed switches:
      - Microchip (sparx5): Add support for TC flower templates

   - Ethernet embedded switches:
      - Broadcom (b54):
         - configure 6318 and 63268 RGMII ports
      - Marvell (mv88e6xxx):
         - faster C45 bus scan
      - Microchip:
         - lan966x:
            - add support for IS1 VCAP
            - better TX/RX from/to CPU performances
         - ksz9477: add ETS Qdisc support
         - ksz8: enhance static MAC table operations and error handling
         - sama7g5: add PTP capability
      - NXP (ocelot):
         - add support for external ports
         - add support for preemptible traffic classes
      - Texas Instruments:
         - add CPSWxG SGMII support for J7200 and J721E

   - Intel WiFi (iwlwifi):
      - preparation for Wi-Fi 7 EHT and multi-link support
      - EHT (Wi-Fi 7) sniffer support
      - hardware timestamping support for some devices/firwmares
      - TX beacon protection on newer hardware

   - Qualcomm 802.11ax WiFi (ath11k):
      - MU-MIMO parameters support
      - ack signal support for management packets

   - RealTek WiFi (rtw88):
      - SDIO bus support
      - better support for some SDIO devices (e.g. MAC address from
        efuse)

   - RealTek WiFi (rtw89):
      - HW scan support for 8852b
      - better support for 6 GHz scanning
      - support for various newer firmware APIs
      - framework firmware backwards compatibility

   - MediaTek WiFi (mt76):
      - P2P support
      - mesh A-MSDU support
      - EHT (Wi-Fi 7) support
      - coredump support"

* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
  net: phy: hide the PHYLIB_LEDS knob
  net: phy: marvell-88x2222: remove unnecessary (void*) conversions
  tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
  net: amd: Fix link leak when verifying config failed
  net: phy: marvell: Fix inconsistent indenting in led_blink_set
  lan966x: Don't use xdp_frame when action is XDP_TX
  tsnep: Add XDP socket zero-copy TX support
  tsnep: Add XDP socket zero-copy RX support
  tsnep: Move skb receive action to separate function
  tsnep: Add functions for queue enable/disable
  tsnep: Rework TX/RX queue initialization
  tsnep: Replace modulo operation with mask
  net: phy: dp83867: Add led_brightness_set support
  net: phy: Fix reading LED reg property
  drivers: nfc: nfcsim: remove return value check of `dev_dir`
  net: phy: dp83867: Remove unnecessary (void*) conversions
  net: ethtool: coalesce: try to make user settings stick twice
  net: mana: Check if netdev/napi_alloc_frag returns single page
  net: mana: Rename mana_refill_rxoob and remove some empty lines
  net: veth: add page_pool stats
  ...
Merge tag 'thermal-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm 2023-04-26T01:32:43+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-04-26T01:32:43+00:00 5e0ca0bfc33b7196ae3a5cbe26289a4025618f5a Pull thermal control updates from Rafael Wysocki: "These mostly continue to prepare the thermal control subsystem for using unified representation of trip points, which includes cleanups, code refactoring and similar and update several drivers (for other reasons), which includes new hardware support. Specifics: - Add a thermal zone 'devdata' accessor and modify several drivers to use it (Daniel Lezcano) - Prevent drivers from using the 'device' internal thermal zone structure field directly (Daniel Lezcano) - Clean up the hwmon thermal driver (Daniel Lezcano) - Add thermal zone id accessor and thermal zone type accessor and prevent drivers from using thermal zone fields directly (Daniel Lezcano) - Clean up the acerhdf and tegra thermal drivers (Daniel Lezcano) - Add lower bound check for sysfs input to the x86_pkg_temp_thermal Intel thermal driver (Zhang Rui) - Add more thermal zone device encapsulation: prevent setting structure field directly, access the sensor device instead the thermal zone's device for trace, relocate the traces in drivers/thermal (Daniel Lezcano) - Use the generic trip point for the i.MX and remove the get_trip_temp ops (Daniel Lezcano) - Use the devm_platform_ioremap_resource() in the Hisilicon driver (Yang Li) - Remove R-Car H3 ES1.* handling as public has only access to the ES2 version and the upstream support for the ES1 has been shutdown (Wolfram Sang) - Add a delay after initializing the bank in order to let the time to the hardware to initialze itself before reading the temperature (Amjad Ouled-Ameur) - Add MT8365 support (Amjad Ouled-Ameur) - Preparational cleanup and DT bindings for RK3588 support (Sebastian Reichel) - Add driver support for RK3588 (Finley Xiao) - Use devm_reset_control_array_get_exclusive() for the Rockchip driver (Ye Xingchen) - Detect power gated thermal zones and return -EAGAIN when reading the temperature (Mikko Perttunen) - Remove thermal_bind_params structure as it is unused (Zhang Rui) - Drop unneeded quotes in DT bindings allowing to run yamllint (Rob Herring) - Update the power allocator documentation according to the thermal trace relocation (Lukas Bulwahn) - Fix sensor 1 interrupt status bitmask for the Mediatek LVTS sensor (Chen-Yu Tsai) - Use the dev_err_probe() helper in the Amlogic driver (Ye Xingchen) - Add AP domain support to LVTS thermal controllers for mt8195 (Balsam CHIHI) - Remove buggy call to thermal_of_zone_unregister() (Daniel Lezcano) - Make thermal_of_zone_[un]register() private to the thermal OF code (Daniel Lezcano) - Create a private copy of the thermal zone device parameters structure when registering a thermal zone (Daniel Lezcano) - Fix a kernel NULL pointer dereference in thermal_hwmon (Zhang Rui) - Revert recent message adjustment in thermal_hwmon (Rafael Wysocki) - Use of_property_present() for testing DT property presence in thermal control code (Rob Herring) - Clean up thermal_list_lock locking in the thermal core (Rafael Wysocki) - Add DLVR support for RFIM control in the int340x Intel thermal driver (Srinivas Pandruvada)" * tag 'thermal-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits) thermal: intel: int340x: Add DLVR support for RFIM control thermal/core: Alloc-copy-free the thermal zone parameters structure thermal/of: Unexport unused OF functions thermal/drivers/bcm2835: Remove buggy call to thermal_of_zone_unregister thermal/drivers/mediatek/lvts_thermal: Add AP domain for mt8195 dt-bindings: thermal: mediatek: Add AP domain to LVTS thermal controllers for mt8195 thermal: amlogic: Use dev_err_probe() thermal/drivers/mediatek/lvts_thermal: Fix sensor 1 interrupt status bitmask MAINTAINERS: adjust entry in THERMAL/POWER_ALLOCATOR after header movement dt-bindings: thermal: Drop unneeded quotes thermal/core: Remove thermal_bind_params structure thermal/drivers/tegra-bpmp: Handle offline zones thermal/drivers/rockchip: use devm_reset_control_array_get_exclusive() dt-bindings: rockchip-thermal: Support the RK3588 SoC compatible thermal/drivers/rockchip: Support RK3588 SoC in the thermal driver thermal/drivers/rockchip: Support dynamic sized sensor array thermal/drivers/rockchip: Simplify channel id logic thermal/drivers/rockchip: Use dev_err_probe thermal/drivers/rockchip: Simplify clock logic thermal/drivers/rockchip: Simplify getting match data ... 
Pull thermal control updates from Rafael Wysocki:
 "These mostly continue to prepare the thermal control subsystem for
  using unified representation of trip points, which includes cleanups,
  code refactoring and similar and update several drivers (for other
  reasons), which includes new hardware support.

  Specifics:

   - Add a thermal zone 'devdata' accessor and modify several drivers to
     use it (Daniel Lezcano)

   - Prevent drivers from using the 'device' internal thermal zone
     structure field directly (Daniel Lezcano)

   - Clean up the hwmon thermal driver (Daniel Lezcano)

   - Add thermal zone id accessor and thermal zone type accessor and
     prevent drivers from using thermal zone fields directly (Daniel
     Lezcano)

   - Clean up the acerhdf and tegra thermal drivers (Daniel Lezcano)

   - Add lower bound check for sysfs input to the x86_pkg_temp_thermal
     Intel thermal driver (Zhang Rui)

   - Add more thermal zone device encapsulation: prevent setting
     structure field directly, access the sensor device instead the
     thermal zone's device for trace, relocate the traces in
     drivers/thermal (Daniel Lezcano)

   - Use the generic trip point for the i.MX and remove the
     get_trip_temp ops (Daniel Lezcano)

   - Use the devm_platform_ioremap_resource() in the Hisilicon driver
     (Yang Li)

   - Remove R-Car H3 ES1.* handling as public has only access to the ES2
     version and the upstream support for the ES1 has been shutdown
     (Wolfram Sang)

   - Add a delay after initializing the bank in order to let the time to
     the hardware to initialze itself before reading the temperature
     (Amjad Ouled-Ameur)

   - Add MT8365 support (Amjad Ouled-Ameur)

   - Preparational cleanup and DT bindings for RK3588 support (Sebastian
     Reichel)

   - Add driver support for RK3588 (Finley Xiao)

   - Use devm_reset_control_array_get_exclusive() for the Rockchip
     driver (Ye Xingchen)

   - Detect power gated thermal zones and return -EAGAIN when reading
     the temperature (Mikko Perttunen)

   - Remove thermal_bind_params structure as it is unused (Zhang Rui)

   - Drop unneeded quotes in DT bindings allowing to run yamllint (Rob
     Herring)

   - Update the power allocator documentation according to the thermal
     trace relocation (Lukas Bulwahn)

   - Fix sensor 1 interrupt status bitmask for the Mediatek LVTS sensor
     (Chen-Yu Tsai)

   - Use the dev_err_probe() helper in the Amlogic driver (Ye Xingchen)

   - Add AP domain support to LVTS thermal controllers for mt8195
     (Balsam CHIHI)

   - Remove buggy call to thermal_of_zone_unregister() (Daniel Lezcano)

   - Make thermal_of_zone_[un]register() private to the thermal OF code
     (Daniel Lezcano)

   - Create a private copy of the thermal zone device parameters
     structure when registering a thermal zone (Daniel Lezcano)

   - Fix a kernel NULL pointer dereference in thermal_hwmon (Zhang Rui)

   - Revert recent message adjustment in thermal_hwmon (Rafael Wysocki)

   - Use of_property_present() for testing DT property presence in
     thermal control code (Rob Herring)

   - Clean up thermal_list_lock locking in the thermal core (Rafael
     Wysocki)

   - Add DLVR support for RFIM control in the int340x Intel thermal
     driver (Srinivas Pandruvada)"

* tag 'thermal-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits)
  thermal: intel: int340x: Add DLVR support for RFIM control
  thermal/core: Alloc-copy-free the thermal zone parameters structure
  thermal/of: Unexport unused OF functions
  thermal/drivers/bcm2835: Remove buggy call to thermal_of_zone_unregister
  thermal/drivers/mediatek/lvts_thermal: Add AP domain for mt8195
  dt-bindings: thermal: mediatek: Add AP domain to LVTS thermal controllers for mt8195
  thermal: amlogic: Use dev_err_probe()
  thermal/drivers/mediatek/lvts_thermal: Fix sensor 1 interrupt status bitmask
  MAINTAINERS: adjust entry in THERMAL/POWER_ALLOCATOR after header movement
  dt-bindings: thermal: Drop unneeded quotes
  thermal/core: Remove thermal_bind_params structure
  thermal/drivers/tegra-bpmp: Handle offline zones
  thermal/drivers/rockchip: use devm_reset_control_array_get_exclusive()
  dt-bindings: rockchip-thermal: Support the RK3588 SoC compatible
  thermal/drivers/rockchip: Support RK3588 SoC in the thermal driver
  thermal/drivers/rockchip: Support dynamic sized sensor array
  thermal/drivers/rockchip: Simplify channel id logic
  thermal/drivers/rockchip: Use dev_err_probe
  thermal/drivers/rockchip: Simplify clock logic
  thermal/drivers/rockchip: Simplify getting match data
  ...
Merge tag 'gpio-updates-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux 2023-04-26T00:18:18+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-04-26T00:18:18+00:00 2c96606a0f8b7900387dbeb6532b59527999834d Pull gpio updates from Bartosz Golaszewski: "We have some new drivers, significant refactoring of existing intel platforms, lots of improvements all around, mass conversion to using immutable irqchips by drivers that had not been converted individually yet and some changes in the core library code. Summary: New drivers: - add a driver for the Loongson GPIO controller - add a driver for the fxl6408 I2C GPIO expander - add a GPIO module containing code common for Intel Elkhart Lake and Merrifield platforms - add a driver for the Intel Elkhart Lake platform reusing the code from the intel tangier library GPIOLIB core: - GPIO ACPI improvements - simplify gpiochip_add_data_with_keys() fwnode handling - cleanup header inclusions (remove unneeded ones, order the rest alphabetically) - remove duplicate code (reuse krealloc() instead of open-coding it, drop a duplicated check in gpiod_find_and_request()) - reshuffle the code to remove unnecessary forward declarations - coding style cleanups and improvements - add a helper for accessing device fwnodes - small updates in docs Driver improvements: - convert all remaining GPIO irqchip drivers to using immutable irqchips - drop unnecessary of_match_ptr() macro expansions - shrink the code in gpio-merrifield significantly by reusing the code from gpio-tangier + minor tweaks to the driver code - remove MODULE_LICENSE() from drivers that can only be built-in - add device-tree support to gpio-loongson1 - use new regmap features in gpio-104-dio-48e and gpio-pcie-idio-24 - minor tweaks and fixes to gpio-xra1403, gpio-sim, gpio-tegra194, gpio-omap, gpio-aspeed, gpio-raspberrypi-exp - shrink code in gpio-ich and gpio-pxa - Kconfig tweak for gpio-pmic-eic-sprd" * tag 'gpio-updates-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (99 commits) gpio: gpiolib: Simplify gpiochip_add_data_with_key() fwnode gpiolib: Add gpiochip_set_data() helper gpiolib: Move gpiochip_get_data() higher in the code gpiolib: Check array_info for NULL only once in gpiod_get_array() gpiolib: Replace open coded krealloc() gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xNU gpiolib: acpi: Move ACPI device NULL check to acpi_get_driver_gpio_data() gpiolib: acpi: use the fwnode in acpi_gpiochip_find() gpio: mm-lantiq: Fix typo in the newly added header filename sh: mach-x3proto: Add missing #include <linux/gpio/driver.h> powerpc/40x: Add missing select OF_GPIO_MM_GPIOCHIP gpio: xlp: Convert to immutable irq_chip gpio: xilinx: Convert to immutable irq_chip gpio: xgs-iproc: Convert to immutable irq_chip gpio: visconti: Convert to immutable irq_chip gpio: tqmx86: Convert to immutable irq_chip gpio: thunderx: Convert to immutable irq_chip gpio: stmpe: Convert to immutable irq_chip gpio: siox: Convert to immutable irq_chip gpio: rda: Convert to immutable irq_chip ... 
Pull gpio updates from Bartosz Golaszewski:
 "We have some new drivers, significant refactoring of existing intel
  platforms, lots of improvements all around, mass conversion to using
  immutable irqchips by drivers that had not been converted individually
  yet and some changes in the core library code.

  Summary:

  New drivers:
   - add a driver for the Loongson GPIO controller
   - add a driver for the fxl6408 I2C GPIO expander
   - add a GPIO module containing code common for Intel Elkhart Lake and
     Merrifield platforms
   - add a driver for the Intel Elkhart Lake platform reusing the code
     from the intel tangier library

  GPIOLIB core:
   - GPIO ACPI improvements
   - simplify gpiochip_add_data_with_keys() fwnode handling
   - cleanup header inclusions (remove unneeded ones, order the rest
     alphabetically)
   - remove duplicate code (reuse krealloc() instead of open-coding it,
     drop a duplicated check in gpiod_find_and_request())
   - reshuffle the code to remove unnecessary forward declarations
   - coding style cleanups and improvements
   - add a helper for accessing device fwnodes
   - small updates in docs

  Driver improvements:
   - convert all remaining GPIO irqchip drivers to using immutable
     irqchips
   - drop unnecessary of_match_ptr() macro expansions
   - shrink the code in gpio-merrifield significantly by reusing the
     code from gpio-tangier + minor tweaks to the driver code
   - remove MODULE_LICENSE() from drivers that can only be built-in
   - add device-tree support to gpio-loongson1
   - use new regmap features in gpio-104-dio-48e and gpio-pcie-idio-24
   - minor tweaks and fixes to gpio-xra1403, gpio-sim, gpio-tegra194,
     gpio-omap, gpio-aspeed, gpio-raspberrypi-exp
   - shrink code in gpio-ich and gpio-pxa
   - Kconfig tweak for gpio-pmic-eic-sprd"

* tag 'gpio-updates-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (99 commits)
  gpio: gpiolib: Simplify gpiochip_add_data_with_key() fwnode
  gpiolib: Add gpiochip_set_data() helper
  gpiolib: Move gpiochip_get_data() higher in the code
  gpiolib: Check array_info for NULL only once in gpiod_get_array()
  gpiolib: Replace open coded krealloc()
  gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xNU
  gpiolib: acpi: Move ACPI device NULL check to acpi_get_driver_gpio_data()
  gpiolib: acpi: use the fwnode in acpi_gpiochip_find()
  gpio: mm-lantiq: Fix typo in the newly added header filename
  sh: mach-x3proto: Add missing #include <linux/gpio/driver.h>
  powerpc/40x: Add missing select OF_GPIO_MM_GPIOCHIP
  gpio: xlp: Convert to immutable irq_chip
  gpio: xilinx: Convert to immutable irq_chip
  gpio: xgs-iproc: Convert to immutable irq_chip
  gpio: visconti: Convert to immutable irq_chip
  gpio: tqmx86: Convert to immutable irq_chip
  gpio: thunderx: Convert to immutable irq_chip
  gpio: stmpe: Convert to immutable irq_chip
  gpio: siox: Convert to immutable irq_chip
  gpio: rda: Convert to immutable irq_chip
  ...
Merge tag 'soc-drivers-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 2023-04-25T19:02:16+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-04-25T19:02:16+00:00 a907047732470f75f3b7c9a8ee09b16765b8364c Pull ARM SoC driver updates from Arnd Bergmann: "The most notable updates this time are for Qualcomm Snapdragon platforms. The Inline-Crypto-Engine gets a new DT binding and driver, and a number of drivers now support additional Snapdragon variants, in particular the rsc, scm, geni, bwm, glink and socinfo, while the llcc (edac) and rpm drivers get notable functionality updates. Updates on other platforms include: - Various updates to the Mediatek mutex and mmsys drivers, including support for the Helio X10 SoC - Support for unidirectional mailbox channels in Arm SCMI firmware - Support for per cpu asynchronous notification in OP-TEE firmware - Minor updates for memory controller drivers. - Minor updates for Renesas, TI, Amlogic, Apple, Broadcom, Tegra, Allwinner, Versatile Express, Canaan, Microchip, Mediatek and i.MX SoC drivers, mainly updating the use of MODULE_LICENSE() macros and obsolete DT driver interfaces" * tag 'soc-drivers-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) soc: ti: smartreflex: Simplify getting the opam_sr pointer bus: vexpress-config: Add explicit of_platform.h include soc: mediatek: Kconfig: Add MTK_CMDQ dependency to MTK_MMSYS memory: mtk-smi: mt8365: Add SMI Support dt-bindings: memory-controllers: mediatek,smi-larb: add mt8365 dt-bindings: memory-controllers: mediatek,smi-common: add mt8365 memory: tegra: read values from correct device dt-bindings: crypto: Add Qualcomm Inline Crypto Engine soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driver dt-bindings: firmware: document Qualcomm QCM2290 SCM soc: qcom: rpmh-rsc: Support RSC v3 minor versions soc: qcom: smd-rpm: Use GFP_ATOMIC in write path soc/tegra: fuse: Remove nvmem root only access soc/tegra: cbb: tegra194: Use of_address_count() helper soc/tegra: cbb: Remove MODULE_LICENSE in non-modules ARM: tegra: Remove MODULE_LICENSE in non-modules soc/tegra: flowctrl: Use devm_platform_get_and_ioremap_resource() soc: tegra: cbb: Drop empty platform remove function firmware: arm_scmi: Add support for unidirectional mailbox channels dt-bindings: firmware: arm,scmi: Support mailboxes unidirectional channels ... 
Pull ARM SoC driver updates from Arnd Bergmann:
 "The most notable updates this time are for Qualcomm Snapdragon
  platforms. The Inline-Crypto-Engine gets a new DT binding and driver,
  and a number of drivers now support additional Snapdragon variants, in
  particular the rsc, scm, geni, bwm, glink and socinfo, while the llcc
  (edac) and rpm drivers get notable functionality updates.

  Updates on other platforms include:

   - Various updates to the Mediatek mutex and mmsys drivers, including
     support for the Helio X10 SoC

   - Support for unidirectional mailbox channels in Arm SCMI firmware

   - Support for per cpu asynchronous notification in OP-TEE firmware

   - Minor updates for memory controller drivers.

   - Minor updates for Renesas, TI, Amlogic, Apple, Broadcom, Tegra,
     Allwinner, Versatile Express, Canaan, Microchip, Mediatek and i.MX
     SoC drivers, mainly updating the use of MODULE_LICENSE() macros and
     obsolete DT driver interfaces"

* tag 'soc-drivers-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
  soc: ti: smartreflex: Simplify getting the opam_sr pointer
  bus: vexpress-config: Add explicit of_platform.h include
  soc: mediatek: Kconfig: Add MTK_CMDQ dependency to MTK_MMSYS
  memory: mtk-smi: mt8365: Add SMI Support
  dt-bindings: memory-controllers: mediatek,smi-larb: add mt8365
  dt-bindings: memory-controllers: mediatek,smi-common: add mt8365
  memory: tegra: read values from correct device
  dt-bindings: crypto: Add Qualcomm Inline Crypto Engine
  soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driver
  dt-bindings: firmware: document Qualcomm QCM2290 SCM
  soc: qcom: rpmh-rsc: Support RSC v3 minor versions
  soc: qcom: smd-rpm: Use GFP_ATOMIC in write path
  soc/tegra: fuse: Remove nvmem root only access
  soc/tegra: cbb: tegra194: Use of_address_count() helper
  soc/tegra: cbb: Remove MODULE_LICENSE in non-modules
  ARM: tegra: Remove MODULE_LICENSE in non-modules
  soc/tegra: flowctrl: Use devm_platform_get_and_ioremap_resource()
  soc: tegra: cbb: Drop empty platform remove function
  firmware: arm_scmi: Add support for unidirectional mailbox channels
  dt-bindings: firmware: arm,scmi: Support mailboxes unidirectional channels
  ...
Merge tag 'wireless-next-2023-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next 2023-04-21T14:35:51+00:00 Jakub Kicinski kuba@kernel.org 2023-04-21T14:35:51+00:00 ca288965801572fe41386560d4e6c5cc0e5cc56d Kalle Valo says: ==================== wireless-next patches for v6.4 Most likely the last -next pull request for v6.4. We have changes all over. rtw88 now supports SDIO bus and iwlwifi continues to work on Wi-Fi 7 support. Not much stack changes this time. Major changes: cfg80211/mac80211 - fix some Fine Time Measurement (FTM) frames not being bufferable - flush frames before key removal to avoid potential unencrypted transmission depending on the hardware design iwlwifi - preparation for Wi-Fi 7 EHT and multi-link support rtw88 - SDIO bus support - RTL8822BS, RTL8822CS and RTL8821CS SDIO chipset support rtw89 - framework firmware backwards compatibility brcmfmac - Cypress 43439 SDIO support mt76 - mt7921 P2P support - mt7996 mesh A-MSDU support - mt7996 EHT support - mt7996 coredump support wcn36xx - support for pronto v3 hardware ath11k - PCIe DeviceTree bindings - WCN6750: enable SAR support ath10k - convert DeviceTree bindings to YAML * tag 'wireless-next-2023-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (261 commits) wifi: rtw88: Update spelling in main.h wifi: airo: remove ISA_DMA_API dependency wifi: rtl8xxxu: Simplify setting the initial gain wifi: rtl8xxxu: Add rtl8xxxu_write{8,16,32}_{set,clear} wifi: rtl8xxxu: Don't print the vendor/product/serial wifi: rtw88: Fix memory leak in rtw88_usb wifi: rtw88: call rtw8821c_switch_rf_set() according to chip variant wifi: rtw88: set pkg_type correctly for specific rtw8821c variants wifi: rtw88: rtw8821c: Fix rfe_option field width wifi: rtw88: usb: fix priority queue to endpoint mapping wifi: rtw88: 8822c: add iface combination wifi: rtw88: handle station mode concurrent scan with AP mode wifi: rtw88: prevent scan abort with other VIFs wifi: rtw88: refine reserved page flow for AP mode wifi: rtw88: disallow PS during AP mode wifi: rtw88: 8822c: extend reserved page number wifi: rtw88: add port switch for AP mode wifi: rtw88: add bitmap for dynamic port settings wifi: rtw89: mac: use regular int as return type of DLE buffer request wifi: mac80211: remove return value check of debugfs_create_dir() ... ==================== Link: https://lore.kernel.org/r/20230421104726.800BCC433D2@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Kalle Valo says:

====================
wireless-next patches for v6.4

Most likely the last -next pull request for v6.4. We have changes all
over. rtw88 now supports SDIO bus and iwlwifi continues to work on
Wi-Fi 7 support. Not much stack changes this time.

Major changes:

cfg80211/mac80211
 - fix some Fine Time Measurement (FTM) frames not being bufferable
 - flush frames before key removal to avoid potential unencrypted
   transmission depending on the hardware design

iwlwifi
 - preparation for Wi-Fi 7 EHT and multi-link support

rtw88
 - SDIO bus support
 - RTL8822BS, RTL8822CS and RTL8821CS SDIO chipset support

rtw89
 - framework firmware backwards compatibility

brcmfmac
 - Cypress 43439 SDIO support

mt76
 - mt7921 P2P support
 - mt7996 mesh A-MSDU support
 - mt7996 EHT support
 - mt7996 coredump support

wcn36xx
 - support for pronto v3 hardware

ath11k
 - PCIe DeviceTree bindings
 - WCN6750: enable SAR support

ath10k
 - convert DeviceTree bindings to YAML

* tag 'wireless-next-2023-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (261 commits)
  wifi: rtw88: Update spelling in main.h
  wifi: airo: remove ISA_DMA_API dependency
  wifi: rtl8xxxu: Simplify setting the initial gain
  wifi: rtl8xxxu: Add rtl8xxxu_write{8,16,32}_{set,clear}
  wifi: rtl8xxxu: Don't print the vendor/product/serial
  wifi: rtw88: Fix memory leak in rtw88_usb
  wifi: rtw88: call rtw8821c_switch_rf_set() according to chip variant
  wifi: rtw88: set pkg_type correctly for specific rtw8821c variants
  wifi: rtw88: rtw8821c: Fix rfe_option field width
  wifi: rtw88: usb: fix priority queue to endpoint mapping
  wifi: rtw88: 8822c: add iface combination
  wifi: rtw88: handle station mode concurrent scan with AP mode
  wifi: rtw88: prevent scan abort with other VIFs
  wifi: rtw88: refine reserved page flow for AP mode
  wifi: rtw88: disallow PS during AP mode
  wifi: rtw88: 8822c: extend reserved page number
  wifi: rtw88: add port switch for AP mode
  wifi: rtw88: add bitmap for dynamic port settings
  wifi: rtw89: mac: use regular int as return type of DLE buffer request
  wifi: mac80211: remove return value check of debugfs_create_dir()
  ...
====================

Link: https://lore.kernel.org/r/20230421104726.800BCC433D2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2023-04-20T23:29:51+00:00 Jakub Kicinski kuba@kernel.org 2023-04-20T23:27:33+00:00 681c5b51dc6b8ff1ec05555243eccf64a08cb2fd Adjacent changes: net/mptcp/protocol.h 63740448a32e ("mptcp: fix accept vs worker race") 2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close") ddb1a072f858 ("mptcp: move first subflow allocation at mpc access time") Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Adjacent changes:

net/mptcp/protocol.h
  63740448a32e ("mptcp: fix accept vs worker race")
  2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close")
  ddb1a072f858 ("mptcp: move first subflow allocation at mpc access time")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wifi: ath9k: Don't mark channelmap stack variable read-only in ath9k_mci_update_wlan_channels() 2023-04-20T22:26:37+00:00 Toke Høiland-Jørgensen toke@toke.dk 2023-04-13T21:41:18+00:00 0f2a4af27b649c13ba76431552fe49c60120d0f6 This partially reverts commit e161d4b60ae3a5356e07202e0bfedb5fad82c6aa. Turns out the channelmap variable is not actually read-only, it's modified through the MCI_GPM_CLR_CHANNEL_BIT() macro further down in the function, so making it read-only causes page faults when that code is hit. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217183 Link: https://lore.kernel.org/r/20230413214118.153781-1-toke@toke.dk Fixes: e161d4b60ae3 ("wifi: ath9k: Make arrays prof_prio and channelmap static const") Cc: stable@vger.kernel.org Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
This partially reverts commit e161d4b60ae3a5356e07202e0bfedb5fad82c6aa.

Turns out the channelmap variable is not actually read-only, it's modified
through the MCI_GPM_CLR_CHANNEL_BIT() macro further down in the function,
so making it read-only causes page faults when that code is hit.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217183
Link: https://lore.kernel.org/r/20230413214118.153781-1-toke@toke.dk
Fixes: e161d4b60ae3 ("wifi: ath9k: Make arrays prof_prio and channelmap static const")
Cc: stable@vger.kernel.org
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git 2023-04-20T16:43:45+00:00 Kalle Valo kvalo@kernel.org 2023-04-20T16:43:45+00:00 3288ee5844b74cebb94ed15bc9b5b9d3223ae038 ath.git patches for v6.4. Major changes: wcn36xx * support for pronto v3 hardware ath11k * PCIe DeviceTree bindings * WCN6750: enable SAR support ath10k * convert DeviceTree bindings to YAML 
ath.git patches for v6.4. Major changes:

wcn36xx

* support for pronto v3 hardware

ath11k

* PCIe DeviceTree bindings

* WCN6750: enable SAR support

ath10k

* convert DeviceTree bindings to YAML