In order to reduce the chance for the system becoming unresponsive due
to event storms triggered by a misbehaving netfront use the lateeoi
irq binding for netback and unmask the event channel only just before
going to sleep waiting for new events.

Make sure not to issue an EOI when none is pending by introducing an
eoi_pending element to struct xenvif_queue.

When no request has been consumed set the spurious flag when sending
the EOI for an interrupt.

This is part of XSA-332.

Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

the patch basically adds the offset adjustment and netfront
state reading to make XDP work on netfront side.

Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

list_for_each_entry_rcu has built-in RCU and lock checking.
Pass cond argument to list_for_each_entry_rcu.

Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik04@gmail.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

By re-attaching RX, TX, and CTL rings during connect() rather than
assuming they are freshly allocated (i.e. assuming the counters are zero),
and avoiding forcing state to Closed in netback_remove() it is possible
for vif instances to be unbound and re-bound from and to (respectively) a
running guest.

Dynamic unbind/bind is a highly useful feature for a backend module as it
allows it to be unloaded and re-loaded (i.e. updated) without requiring
domUs to be halted.

This has been tested by running iperf as a server in the test VM and
then running a client against it in a continuous loop, whilst also
running:

while true;
  do echo vif-$DOMID-$VIF >unbind;
  echo down;
  rmmod xen-netback;
  echo unloaded;
  modprobe xen-netback;
  cd $(pwd);
  brctl addif xenbr0 vif$DOMID.$VIF;
  ip link set vif$DOMID.$VIF up;
  echo up;
  sleep 5;
  done

in dom0 from /sys/bus/xen-backend/drivers/vif to continuously unbind,
unload, re-load, re-bind and re-plumb the backend.

Clearly a performance drop was seen but no TCP connection resets were
observed during this test and moreover a parallel SSH connection into the
guest remained perfectly usable throughout.

Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mere overlapping changes in the conflicts here.

Signed-off-by: David S. Miller <davem@davemloft.net>

Removing the 'hotplug-status' node in netback_remove() is wrong; the script
may not have completed. Only remove the node once the watch has fired and
has been unregistered.

Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

...as the comment above the function states.

The switch to Initialising at the start of the function is somewhat bogus
as the toolstack will have set that initial state anyway. To behave
correctly, a backend should switch to InitWait once it has set up all
xenstore values that may be required by a initialising frontend. This
patch calls backend_switch_state() to make the transition at the
appropriate point.

NOTE: backend_switch_state() ignores errors from xenbus_switch_state()
      and so this patch removes an error path from netback_probe(). This
      means a failure to change state at this stage (in the absence of
      other failures) will leave the device instantiated. This is highly
      unlikley to happen as a failure to change state would indicate a
      failure to write to xenstore, and that will trigger other error
      paths. Also, a 'stuck' device can still be cleaned up using 'unbind'
      in any case.

Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

...of xenbus.c

This is a cosmetic function re-ordering to reduce churn in a subsequent
patch. Some style fix-up was done to make checkpatch.pl happier.

No functional change.

Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

In function xenvif_disconnect_queue(), the value of queue->rx_irq is
zeroed *before* queue->task is stopped. Unfortunately that task may call
notify_remote_via_irq(queue->rx_irq) and calling that function with a
zero value results in a NULL pointer dereference in evtchn_from_irq().

This patch simply re-orders things, stopping all tasks before zero-ing the
irq values, thereby avoiding the possibility of the race.

Fixes: 2ac061ce97f4 ("xen/netback: cleanup init and deinit code")
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>