linux-toradex.git/drivers/net, branch 3.0-pcm052-ts2.6

pcm052: fec1: support added for ETH1

2013-08-28T22:26:23+00:00

Signed-off-by: Serah Peterson

ENGR00216078-2: switch: add L2 switch driver for Vybrid

2012-10-17T18:37:26+00:00

Port the L2 switch driver from CF platform for Vybridi plaform.

This driver usually should work together with the RSTP demo
applications provided by fsl.

Signed-off-by: Alison Wang 
Signed-off-by: Jason Jin

ENGR00181358-3: fec: add second FEC support for Vybrid

2012-10-17T18:37:26+00:00

Add second FEC support for Vybrid.

Signed-off-by: Alison Wang

Enable the FEC as modules

2012-09-12T20:50:07+00:00

Signed-off-by: Jason Jin

ENGR00181358-2: fec: add FEC driver support for MVF

2012-09-12T20:49:43+00:00

Add FEC driver support for MVF.
Update the phyid for micrel ksz8041 phy.

There are several version sz8041 with different phyid. Those id:
0x00221510, 0x00221512, 0x00221513 were found on different version
SER board. So change the mask to 0x00fffff0 to fit the different version.

Signed-off-by: Jason Jin

Add ath6kl cleaned up driver

2012-02-08T07:06:39+00:00

Last May we started working on cleaning up ath6kl driver which is
currently in staging. The work has happened in a separate
ath6kl-cleanup tree:

http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary

After over 1100 (!) patches we have now reached a state where I would
like to start discussing about pushing the driver to the wireless
trees and replacing the staging driver.

The driver is now a lot smaller and looks like a proper Linux driver.
The size of the driver (measured with simple wc -l) dropped from 49
kLOC to 18 kLOC and the number of the .c and .h files dropped from 107
to 22. Most importantly the number of subdirectories reduced from 26
to zero :)

There are two remaining checkpatch warnings in the driver which we
decided to omit for now:

drivers/net/wireless/ath/ath6kl/debug.c:31:
  WARNING: printk() should include KERN_ facility level
drivers/net/wireless/ath/ath6kl/sdio.c:527:
  WARNING: msleep < 20ms can sleep for up to 20ms;
  see Documentation/timers/timers-howto.txt

The driver has endian annotations for all the hardware specific
structures and there are no sparse errors. Unfortunately I don't have
any big endian hardware to test that right now.

We have been testing the driver both on x86 and arm platforms. The
code is also compiled with sparc and parisc cross compilers.

Notable missing features compared to the current staging driver are:

o HCI over SDIO support
o nl80211 testmode
o firmware logging
o suspend support

Testmode, firmware logging and suspend support will be added soon. HCI
over SDIO support will be more difficult as the HCI driver needs to
share code with the wifi driver. This is something we need to research
more.

Also I want to point out the changes I did for signed endian support.
As I wasn't able to find any support for signed endian annotations I
decided to follow what NTFS has done and added my own. Grep for sle16
and sle32, especially from wmi.h.

Various people have been working on the cleanup, the hall of
fame based on number of patches is:

   543  Vasanthakumar Thiagarajan
   403  Raja Mani
   252  Kalle Valo
    16  Vivek Natarajan
    12  Suraj Sumangala
     3  Joe Perches
     2  Jouni Malinen

Signed-off-by: Vasanthakumar Thiagarajan 
Signed-off-by: Raja Mani 
Signed-off-by: Vivek Natarajan 
Signed-off-by: Suraj Sumangala 
Signed-off-by: Joe Perches 
Signed-off-by: Jouni Malinen 
Signed-off-by: Kalle Valo

ENGR00172274-02 - IEEE-1588: rework ts_clk in MX6 ARIK CPU board.

2012-02-08T04:37:59+00:00

Default use RMII 50MHz clock for ts_clk.
Test result:
	Enet work fine at 100/1000Mbps in TO1.1 and Rigel.
	IEEE 1588 timestamp is convergent for 25M & 50M & 100MHz
	timestamp clock.

Signed-off-by: Fugang Duan

ENGR00173869-9: i.mx6dl: add the misc drivers support

2012-02-07T10:28:41+00:00

This patch change is very trivial and simply just add
cpu_is_mx6dl() or using cpu_is_mx6 to replace cpu_is_mx6q

each driver owner will check it and adjust it accordingly later,
such as sdhc etc.

Signed-off-by: Jason Liu

net: remove mm.h inclusion from netdevice.h

2012-01-31T06:25:55+00:00

Remove linux/mm.h inclusion from netdevice.h -- it's unused (I've checked manually).

To prevent mm.h inclusion via other channels also extract "enum dma_data_direction"
definition into separate header. This tiny piece is what gluing netdevice.h with mm.h
via "netdevice.h => dmaengine.h => dma-mapping.h => scatterlist.h => mm.h".
Removal of mm.h from scatterlist.h was tried and was found not feasible
on most archs, so the link was cutoff earlier.

Hope people are OK with tiny include file.

Note, that mm_types.h is still dragged in, but it is a separate story.

Signed-off-by: Alexey Dobriyan 
Signed-off-by: David S. Miller

ENGR00172374-3: flexcan: use irq_set_irq_wake

2012-01-19T07:26:55+00:00

fix the building errors when upgrade to v3.0

The following commit change the function name:
commit a0cd9ca2b907d7ee26575e7b63ac92dad768a75e
Author: Thomas Gleixner 
Date:   Thu Feb 10 11:36:33 2011 +0100

    genirq: Namespace cleanup

    The irq namespace has become quite convoluted. My bad.  Clean it up
    and deprecate the old functions. All new functions follow the scheme:

    irq number based:
        irq_set/get/xxx/_xxx(unsigned int irq, ...)

    irq_data based:
         irq_data_set/get/xxx/_xxx(struct irq_data *d, ....)

    irq_desc based:
         irq_desc_get_xxx(struct irq_desc *desc)

    Signed-off-by: Thomas Gleixner 

We need give one fix to change the function call name to align this change,

-       ret = set_irq_wake(dev->irq, 1);
+       ret = irq_set_irq_wake(dev->irq, 1);

Signed-off-by: Jason Liu