linux-toradex.git/drivers/net, branch v2.6.17.12

sky2: version 1.6.1

2006-09-08T21:51:40+00:00

Since this code incorporates some of the fixes from 2.6.18, change
the version number.

Signed-off-by: Stephen Hemminger 
Signed-off-by: Greg Kroah-Hartman

sky2: fix fiber support

2006-09-08T21:51:40+00:00

Fix support for fiber based devices.  Needed to keep track of PMD type to
add workaround in setup. Add support for gigabit half duplex fiber.

Signed-off-by: Stephen Hemminger 
Signed-off-by: Greg Kroah-Hartman

sky2: MSI test timing

2006-09-08T21:51:40+00:00

The test for MSI IRQ could have timing issues. The PCI write needs to be 
pushed out before waiting, and the wait queue should be initialized before
the IRQ.

Signed-off-by: Stephen Hemminger 
Signed-off-by: Greg Kroah-Hartman

sky2: use dev_alloc_skb for receive buffers

2006-09-08T21:51:40+00:00

Several code paths assume an additional 16 bytes of header padding
on the receive path. Use dev_alloc_skb to get that padding.

Signed-off-by: Stephen Hemminger 
Signed-off-by: Greg Kroah-Hartman

sky2: clear status IRQ after empty

2006-09-08T21:51:40+00:00

Don't clear status IRQ until list has been read to avoid causing
status list wraparound. Clearing IRQ forces a Transmit Status update
if it is pending.

Signed-off-by: Stephen Hemminger 
Signed-off-by: Greg Kroah-Hartman

sky2: accept flow control

2006-09-08T21:51:39+00:00

Don't program the GMAC to reject flow control packets.
This maybe the cause of some of the transmit hangs.

Signed-off-by: Stephen Hemminger 
Signed-off-by: Greg Kroah-Hartman

TG3: Disable TSO by default

2006-09-08T21:51:38+00:00

Disable TSO by default on some chips due to hardware errata.

Enabling TSO can lead to tx timeouts in some cases when the TSO
header size exceeds 80 bytes on the affected chips.  This limit
can be exceeded when the TCP header contains the timestamp option
plus 2 SACK blocks, for example.  A more complete workaround is
available in the next 2.6.18 kernel.

Signed-off-by: Michael Chan 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

spectrum_cs: Fix firmware uploading errors

2006-09-08T21:51:36+00:00

This fixes firmware upload failures which prevent the driver from working.

Signed-off-by: Richard Purdie 
Cc: Dominik Brodowski 
Signed-off-by: Andrew Morton 
Signed-off-by: Greg Kroah-Hartman

sky2: phy power problem on 88e805x

2006-08-23T21:13:30+00:00

On the 88E805X chipsets (used in laptops), the PHY was not getting powered
out of shutdown properly. The variable reg1 was getting reused incorrectly.
This is probably the cause of the bug.
	http://bugzilla.kernel.org/show_bug.cgi?id=6471

Signed-off-by: Stephen Hemminger 
Signed-off-by: Greg Kroah-Hartman

e1000: add forgotten PCI ID for supported device

2006-08-07T03:52:15+00:00

The Intel(R) PRO/1000 82572EI card is fully supported by 7.0.33-k2 and
onward.  Add the device ID so this card works with 2.6.17.y onward. This
device ID was accidentally omitted.

Signed-off-by: Auke Kok 
Signed-off-by: Greg Kroah-Hartman