linux-toradex.git/drivers/net, branch v2.6.27-rc4

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6

2008-08-19T04:15:44+00:00

removed unused #include

2008-08-18T15:05:15+00:00

The drivers below do not use LINUX_VERSION_CODE nor KERNEL_VERSION.
  drivers/net/wireless/ath5k/base.c
  drivers/net/wireless/b43/main.c
  drivers/net/wireless/ipw2100.c
  drivers/net/wireless/ipw2200.c
  drivers/net/wireless/iwlwifi/iwl-3945.c
  drivers/net/wireless/iwlwifi/iwl-4965.c
  drivers/net/wireless/iwlwifi/iwl-5000.c
  drivers/net/wireless/iwlwifi/iwl-agn.c
  drivers/net/wireless/iwlwifi/iwl-core.c
  drivers/net/wireless/iwlwifi/iwl-eeprom.c
  drivers/net/wireless/iwlwifi/iwl-hcmd.c
  drivers/net/wireless/iwlwifi/iwl-power.c
  drivers/net/wireless/iwlwifi/iwl3945-base.c

This patch removes the said #include .

Signed-off-by: Huang Weiyi 
Signed-off-by: John W. Linville

rt2x00: Fix txdone_entry_desc_flags

2008-08-18T15:05:15+00:00

txdone_entry_desc_flags is used with __set_bit and test_bit which
bit-shift the values, so don't bit-shift the flags in the enum.
Also make sure flags are initialized before being used.

Signed-off-by: Jochen Friedrich 
Signed-off-by: Ivo van Doorn 
Signed-off-by: John W. Linville

b43: Fix for another Bluetooth Coexistence SPROM Programming error for BCM4306

2008-08-18T15:05:15+00:00

In trying to help users on the Ubuntu Bugzilla, I discovered another
BCM4306 with the Bluetooth Coexistence programming error in the SPROM.

This patch is contingent on the one that added the Linksys device with
subdevice code of 0x0014.

Signed-off-by: Larry Finger 
Cc: Stable 
Signed-off-by: John W. Linville

p54u: reset skb's data/tail pointer on requeue

2008-08-18T15:05:14+00:00

(Only important for USB V1 Adaptors)

If an incoming frame wasn't accepted by p54_rx function
the skb will be reused for new frames...

But, we must not forget to set the skb's data pointers into
the same state in which it was initialized by p54u_init_urbs.

Otherwise we either end up with 16 bytes less on every requeue,
or if a new frame is worthy enough to be accepted, the data is
in the wrong place (urb->transfer_buffer wasn't updated!) and mac80211
has a hard time to recognize it...

Signed-off-by: Christian Lamparter 
Signed-off-by: John W. Linville

p54: move p54_vdcf_init to the right place.

2008-08-18T15:05:14+00:00

priv->tx_hdr_len is set by the driver _after_ it called p54_init_common.
While this isn't much a problem for any PCI or ISL3887 cards/sticks,
because they don't need any extra header and therefore tx_hdr_len is
zero for them...

Signed-off-by: Christian Lamparter 
Signed-off-by: John W. Linville

iwlwifi: fix printk newlines

2008-08-18T15:05:13+00:00

Add newlines at printk outputs to not break dmesg.

Signed-off-by: Jiri Slaby 
Cc: Zhu Yi 
Cc: Reinette Chatre 
Signed-off-by: John W. Linville

rtl8187: Add USB ID for Netgear WG111V3

2008-08-18T15:05:13+00:00

Add the USB ID for a Netgear WG111v3.

Signed-off-by: matthieu Barthélemy 
Signed-off-by: Larry Finger 
Signed-off-by: John W. Linville

b43: Fix for SPROM coding error in Linksys WMP54G (BCM4306/3)

2008-08-18T15:05:13+00:00

The Linksys WMP54G (BCM4306/3) card in a PCI format has an SPROM coding
error and needs the fix found for several other cards.

Signed-off-by: Larry Finger 
Cc: Stable 		[2.6.25.x, 2.6.26.x]
Signed-off-by: Michael Buesch 
Signed-off-by: John W. Linville

ath5k: Don't fiddle with MSI on suspend/resume.

2008-08-18T15:05:13+00:00

Commit 256b152b005e319f985f50f2a910a75ba0def74f (ath5k: don't enable
MSI, we cannot handle it yet) has removed msi support, but overlooked
the suspend/resume code. This patch completes msi removal.

I don't consider this patch copyrightable, and thus put it into the
public domain. The result is of course a base.c file dual-licensed under
3-clause-BSD and GPL.

Signed-off-by: Michael Karcher 
Acked-by: Nick Kossifidis 
Signed-off-by: John W. Linville