linux-toradex.git/drivers/net, branch v3.14.9

net/mlx4_core: Keep only one driver entry release mlx4_priv

2014-06-26T19:15:40+00:00

[ Upstream commit da1de8dfff09d33d4a5345762c21b487028e25f5 ]

Following commit befdf89 "net/mlx4_core: Preserve pci_dev_data after
__mlx4_remove_one()", there are two mlx4 pci callbacks which will
attempt to release the mlx4_priv object -- .shutdown and .remove.

This leads to a use-after-free access to the already freed mlx4_priv
instance and trigger a "Kernel access of bad area" crash when both
.shutdown and .remove are called.

During reboot or kexec, .shutdown is called, with the VFs probed to
the host going through shutdown first and then the PF. Later, the PF
will trigger VFs' .remove since VFs still have driver attached.

Fix that by keeping only one driver entry which releases mlx4_priv.

Fixes: befdf89 ('net/mlx4_core: Preserve pci_dev_data after __mlx4_remove_one()')
CC: Bjorn Helgaas 
Signed-off-by: Or Gerlitz 
Signed-off-by: Jack Morgenstein 
Signed-off-by: Wei Yang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net/mlx4_core: Preserve pci_dev_data after __mlx4_remove_one()

2014-06-26T19:15:40+00:00

[ Upstream commit befdf8978accecac2e0739e6b5075afc62db37fe ]

pci_match_id() just match the static pci_device_id, which may return NULL if
someone binds the driver to a device manually using
/sys/bus/pci/drivers/.../new_id.

This patch wrap up a helper function __mlx4_remove_one() which does the tear
down function but preserve the drv_data. Functions like
mlx4_pci_err_detected() and mlx4_restart_one() will call this one with out
releasing drvdata.

Fixes: 97a5221 "net/mlx4_core: pass pci_device_id.driver_data to __mlx4_init_one during reset".

CC: Bjorn Helgaas 
CC: Amir Vadai 
CC: Jack Morgenstein 
CC: Or Gerlitz 
Signed-off-by: Wei Yang 
Acked-by: Jack Morgenstein 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

vxlan: use dev->needed_headroom instead of dev->hard_header_len

2014-06-26T19:15:40+00:00

[ Upstream commit 2853af6a2ea1a8ed09b09dd4fb578e7f435e8d34 ]

When we mirror packets from a vxlan tunnel to other device,
the mirror device should see the same packets (that is, without
outer header). Because vxlan tunnel sets dev->hard_header_len,
tcf_mirred() resets mac header back to outer mac, the mirror device
actually sees packets with outer headers

Vxlan tunnel should set dev->needed_headroom instead of
dev->hard_header_len, like what other ip tunnels do. This fixes
the above problem.

Cc: "David S. Miller" 
Cc: stephen hemminger 
Cc: Pravin B Shelar 
Signed-off-by: Cong Wang 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

sfc: PIO:Restrict to 64bit arch and use 64-bit writes.

2014-06-26T19:15:40+00:00

[ Upstream commit daf37b556e437ec1ea1a597dcfeff338068380e1 ]

Fixes:ee45fd92c739
("sfc: Use TX PIO for sufficiently small packets")

The linux net driver uses memcpy_toio() in order to copy into
the PIO buffers.
Even on a 64bit machine this causes 32bit accesses to a write-
combined memory region.
There are hardware limitations that mean that only 64bit
naturally aligned accesses are safe in all cases.
Due to being write-combined memory region two 32bit accesses
may be coalesced to form a 64bit non 64bit aligned access.
Solution was to open-code the memory copy routines using pointers
and to only enable PIO for x86_64 machines.

Not tested on platforms other than x86_64 because this patch
disables the PIO feature on other platforms.
Compile-tested on x86 to ensure that works.

The WARN_ON_ONCE() code in the previous version of this patch
has been moved into the internal sfc debug driver as the
assertion was unnecessary in the upstream kernel code.

This bug fix applies to v3.13 and v3.14 stable branches.

Signed-off-by: Shradha Shah 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: force a list_del() in unregister_netdevice_many()

2014-06-26T19:15:39+00:00

[ Upstream commit 87757a917b0b3c0787e0563c679762152be81312 ]

unregister_netdevice_many() API is error prone and we had too
many bugs because of dangling LIST_HEAD on stacks.

See commit f87e6f47933e3e ("net: dont leave active on stack LIST_HEAD")

In fact, instead of making sure no caller leaves an active list_head,
just force a list_del() in the callee. No one seems to need to access
the list after unregister_netdevice_many()

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: qmi_wwan: add Olivetti Olicard modems

2014-06-26T19:15:39+00:00

[ Upstream commit ba6de0f5304ccdc45ae260e7e0feb6e0ef2dd558 ]

Lars writes: "I'm only 99% sure that the net interfaces are qmi
interfaces, nothing to lose by adding them in my opinion."

And I tend to agree based on the similarity with the two Olicard
modems we already have here.

Reported-by: Lars Melin 
Signed-off-by: Bjørn Mork 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

sh_eth: fix SH7619/771x support

2014-06-26T19:15:39+00:00

[ Upstream commit d8b0426af5b67973585712c9af36b86f6ea97815 ]

Commit 4a55530f38e4 (net: sh_eth: modify the definitions of register) managed
to leave out the E-DMAC register entries in sh_eth_offset_fast_sh3_sh2[], thus
totally breaking SH7619/771x support.  Add the missing entries using  the data
from before that commit.

Signed-off-by: Sergei Shtylyov 
Acked-by: Yoshihiro Shimoda 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

sh_eth: use RNC mode for packet reception

2014-06-26T19:15:39+00:00

[ Upstream commit 530aa2d0d9d55ab2775d47621ddf4b5b15bc1110 ]

The current behaviour of the sh_eth driver is not to use the RNC bit
for the receive ring. This means that every packet recieved is not only
generating an IRQ but it also stops the receive ring DMA as well until
the driver re-enables it after unloading the packet.

This means that a number of the following errors are generated due to
the receive packet FIFO overflowing due to nowhere to put packets:

	net eth0: Receive FIFO Overflow

Since feedback from Yoshihiro Shimoda shows that every supported LSI
for this driver should have the bit enabled it seems the best way is
to remove the RMCR default value from the per-system data and just
write it when initialising the RMCR value. This is discussed in
the message (http://www.spinics.net/lists/netdev/msg284912.html).

I have tested the RMCR_RNC configuration with NFS root filesystem and
the driver has not failed yet.  There are further test reports from
Sergei Shtylov and others for both the R8A7790 and R8A7791.

There is also feedback fron Cao Minh Hiep[1] which reports the
same issue in (http://comments.gmane.org/gmane.linux.network/316285)
showing this fixes issues with losing UDP datagrams under iperf.

Tested-by: Sergei Shtylyov 
Signed-off-by: Ben Dooks 
Acked-by: Yoshihiro Shimoda 
Acked-by: Simon Horman 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

team: fix mtu setting

2014-06-26T19:15:39+00:00

[ Upstream commit 9d0d68faea6962d62dd501cd6e71ce5cc8ed262b ]

Now it is not possible to set mtu to team device which has a port
enslaved to it. The reason is that when team_change_mtu() calls
dev_set_mtu() for port device, notificator for NETDEV_PRECHANGEMTU
event is called and team_device_event() returns NOTIFY_BAD forbidding
the change. So fix this by returning NOTIFY_DONE here in case team is
changing mtu in team_change_mtu().

Introduced-by: 3d249d4c "net: introduce ethernet teaming device"
Signed-off-by: Jiri Pirko 
Acked-by: Flavio Leitner 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

qlcnic: info leak in qlcnic_dcb_peer_app_info()

2014-06-26T19:15:38+00:00

[ Upstream commit 7df566bbdd0af0785542b89466a937e94257fcfb ]

This function is called from dcbnl_build_peer_app().  The "info"
struct isn't initialized at all so we disclose 2 bytes of uninitialized
stack data.  We should clear it before passing it to the user.

Fixes: 48365e485275 ('qlcnic: dcb: Add support for CEE Netlink interface.')
Signed-off-by: Dan Carpenter 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman