linux-toradex.git/drivers/net, branch v3.18.13

tg3: Hold tp->lock before calling tg3_halt() from tg3_init_one()

2015-04-27T21:13:42+00:00

[ Upstream commit d0af71a3573f1217b140c60b66f1a9b335fb058b ]

tg3_init_one() calls tg3_halt() without tp->lock despite its assumption
and causes deadlock.
If lockdep is enabled, a warning like this shows up before the stall:

  [ BUG: bad unlock balance detected! ]
  3.19.0test #3 Tainted: G            E
  -------------------------------------
  insmod/369 is trying to release lock (&(&tp->lock)->rlock) at:
  [] tg3_chip_reset+0x14d/0x780 [tg3]
  but there are no more locks to release!

tg3_init_one() doesn't call tg3_halt() under normal situation but
during kexec kdump I hit this problem.

Fixes: 932f19de ("tg3: Release tp->lock before invoking synchronize_irq()")
Signed-off-by: Jun'ichi Nomura 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

usbnet: Fix tx_bytes statistic running backward in cdc_ncm

2015-04-27T21:13:42+00:00

[ Upstream commit 7a1e890e2168e33fb62d84528e996b8b4b478fea ]

cdc_ncm disagrees with usbnet about how much framing overhead should
be counted in the tx_bytes statistics, and tries 'fix' this by
decrementing tx_bytes on the transmit path.  But statistics must never
be decremented except due to roll-over; this will thoroughly confuse
user-space.  Also, tx_bytes is only incremented by usbnet in the
completion path.

Fix this by requiring drivers that set FLAG_MULTI_FRAME to set a
tx_bytes delta along with the tx_packets count.

Fixes: beeecd42c3b4 ("net: cdc_ncm/cdc_mbim: adding NCM protocol statistics")
Signed-off-by: Ben Hutchings 
Signed-off-by: Bjørn Mork 
Signed-off-by: Sasha Levin

usbnet: Fix tx_packets stat for FLAG_MULTI_FRAME drivers

2015-04-27T21:13:41+00:00

[ Upstream commit 1e9e39f4a29857a396ac7b669d109f697f66695e ]

Currently the usbnet core does not update the tx_packets statistic for
drivers with FLAG_MULTI_PACKET and there is no hook in the TX
completion path where they could do this.

cdc_ncm and dependent drivers are bumping tx_packets stat on the
transmit path while asix and sr9800 aren't updating it at all.

Add a packet count in struct skb_data so these drivers can fill it
in, initialise it to 1 for other drivers, and add the packet count
to the tx_packets statistic on completion.

Signed-off-by: Ben Hutchings 
Tested-by: Bjørn Mork 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

udptunnels: Call handle_offloads after inserting vlan tag.

2015-04-27T21:13:41+00:00

[ Upstream commit b736a623bd099cdf5521ca9bd03559f3bc7fa31c ]

handle_offloads() calls skb_reset_inner_headers() to store
the layer pointers to the encapsulated packet. However, we
currently push the vlag tag (if there is one) onto the packet
afterwards. This changes the MAC header for the encapsulated
packet but it is not reflected in skb->inner_mac_header, which
breaks GSO and drivers which attempt to use this for encapsulation
offloads.

Fixes: 1eaa8178 ("vxlan: Add tx-vlan offload support.")
Signed-off-by: Jesse Gross 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

vxlan: Fix double free of skb.

2015-04-27T20:48:35+00:00

[ Upstream commit 74f47278cb056ffe1d261df3e094d608c3569829 ]

In case of error vxlan_xmit_one() can free already freed skb.
Also fixes memory leak of dst-entry.

Fixes: acbf74a7630 ("vxlan: Refactor vxlan driver to make use
of the common UDP tunnel functions").

Signed-off-by: Pravin B Shelar 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

vlan: introduce *vlan_hwaccel_push_inside helpers

2015-04-27T20:48:34+00:00

[ Upstream commit 5968250c868ceee680aa77395b24e6ddcae17d36 ]

Use them to push skb->vlan_tci into the payload and avoid code
duplication.

Signed-off-by: Jiri Pirko 
Acked-by: Pravin B Shelar 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

vlan: rename __vlan_put_tag to vlan_insert_tag_set_proto

2015-04-27T20:48:33+00:00

[ Upstream commit 62749e2cb3c4a7da3eaa5c01a7e787aebeff8536 ]

Name fits better. Plus there's going to be introduced
__vlan_insert_tag later on.

Signed-off-by: Jiri Pirko 
Acked-by: Pravin B Shelar 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

vlan: kill vlan_put_tag helper

2015-04-27T20:48:33+00:00

[ Upstream commit b4bef1b57544b18899eb15569e3bafd8d2eeeff6 ]

Since both tx and rx paths work with skb->vlan_tci, there's no need for
this function anymore. Switch users directly to __vlan_hwaccel_put_tag.

Signed-off-by: Jiri Pirko 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

bnx2x: Fix busy_poll vs netpoll

2015-04-27T20:48:30+00:00

[ Upstream commit 074975d0374333f656c48487aa046a21a9b9d7a1 ]

Commit 9a2620c877454 ("bnx2x: prevent WARN during driver unload")
switched the napi/busy_lock locking mechanism from spin_lock() into
spin_lock_bh(), breaking inter-operability with netconsole, as netpoll
disables interrupts prior to calling our napi mechanism.

This switches the driver into using atomic assignments instead of the
spinlock mechanisms previously employed.

Based on initial patch from Yuval Mintz & Ariel Elior

I basically added softirq starvation avoidance, and mixture
of atomic operations, plain writes and barriers.

Note this slightly reduces the overhead for this driver when no
busy_poll sockets are in use.

Fixes: 9a2620c877454 ("bnx2x: prevent WARN during driver unload")
Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net/mlx4_core: Fix error message deprecation for ConnectX-2 cards

2015-04-27T20:48:29+00:00

[ Upstream commit fde913e25496761a4e2a4c81230c913aba6289a2 ]

Commit 1daa4303b4ca ("net/mlx4_core: Deprecate error message at
ConnectX-2 cards startup to debug") did the deprecation only for port 1
of the card. Need to deprecate for port 2 as well.

Fixes: 1daa4303b4ca ("net/mlx4_core: Deprecate error message at ConnectX-2 cards startup to debug")
Signed-off-by: Jack Morgenstein 
Signed-off-by: Amir Vadai 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin