linux-toradex.git/drivers/net, branch v3.2.56

tg3: Don't check undefined error bits in RXBD

2014-04-01T23:59:02+00:00

[ Upstream commit d7b95315cc7f441418845a165ee56df723941487 ]

Redefine the RXD_ERR_MASK to include only relevant error bits. This fixes
a customer reported issue of randomly dropping packets on the 5719.

Signed-off-by: Michael Chan 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

virtio-net: alloc big buffers also when guest can receive UFO

2014-04-01T23:59:02+00:00

[ Upstream commit 0e7ede80d929ff0f830c44a543daa1acd590c749 ]

We should alloc big buffers also when guest can receive UFO
packets to let the big packets fit into guest rx buffer.

Fixes 5c5167515d80f78f6bb538492c423adcae31ad65
(virtio-net: Allow UFO feature to be set and advertised.)

Cc: Rusty Russell 
Cc: Michael S. Tsirkin 
Cc: Sridhar Samudrala 
Signed-off-by: Jason Wang 
Acked-by: Michael S. Tsirkin 
Acked-by: Rusty Russell 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

bonding: 802.3ad: make aggregator_identifier bond-private

2014-04-01T23:59:01+00:00

[ Upstream commit 163c8ff30dbe473abfbb24a7eac5536c87f3baa9 ]

aggregator_identifier is used to assign unique aggregator identifiers
to aggregators of a bond during device enslaving.

aggregator_identifier is currently a global variable that is zeroed in
bond_3ad_initialize().

This sequence will lead to duplicate aggregator identifiers for eth1 and eth3:

create bond0
change bond0 mode to 802.3ad
enslave eth0 to bond0 		//eth0 gets agg id 1
enslave eth1 to bond0 		//eth1 gets agg id 2
create bond1
change bond1 mode to 802.3ad
enslave eth2 to bond1		//aggregator_identifier is reset to 0
				//eth2 gets agg id 1
enslave eth3 to bond0 		//eth3 gets agg id 2

Fix this by making aggregator_identifier private to the bond.

Signed-off-by: Jiri Bohac 
Acked-by: Veaceslav Falico 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

usbnet: remove generic hard_header_len check

2014-04-01T23:59:01+00:00

[ Upstream commit eb85569fe2d06c2fbf4de7b66c263ca095b397aa ]

This patch removes a generic hard_header_len check from the usbnet
module that is causing dropped packages under certain circumstances
for devices that send rx packets that cross urb boundaries.

One example is the AX88772B which occasionally send rx packets that
cross urb boundaries where the remaining partial packet is sent with
no hardware header. When the buffer with a partial packet is of less
number of octets than the value of hard_header_len the buffer is
discarded by the usbnet module.

With AX88772B this can be reproduced by using ping with a packet
size between 1965-1976.

The bug has been reported here:

https://bugzilla.kernel.org/show_bug.cgi?id=29082

This patch introduces the following changes:
- Removes the generic hard_header_len check in the rx_complete
  function in the usbnet module.
- Introduces a ETH_HLEN check for skbs that are not cloned from
  within a rx_fixup callback.
- For safety a hard_header_len check is added to each rx_fixup
  callback function that could be affected by this change.
  These extra checks could possibly be removed by someone
  who has the hardware to test.
- Removes a call to dev_kfree_skb_any() and instead utilizes the
  dev->done list to queue skbs for cleanup.

The changes place full responsibility on the rx_fixup callback
functions that clone skbs to only pass valid skbs to the
usbnet_skb_return function.

Signed-off-by: Emil Goode 
Reported-by: Igor Gnatenko 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

tg3: Fix deadlock in tg3_change_mtu()

2014-04-01T23:59:00+00:00

[ Upstream commit c6993dfd7db9b0c6b7ca7503a56fda9236a4710f ]

Quoting David Vrabel -
"5780 cards cannot have jumbo frames and TSO enabled together.  When
jumbo frames are enabled by setting the MTU, the TSO feature must be
cleared.  This is done indirectly by calling netdev_update_features()
which will call tg3_fix_features() to actually clear the flags.

netdev_update_features() will also trigger a new netlink message for the
feature change event which will result in a call to tg3_get_stats64()
which deadlocks on the tg3 lock."

tg3_set_mtu() does not need to be under the tg3 lock since converting
the flags to use set_bit(). Move it out to after tg3_netif_stop().

Reported-by: David Vrabel 
Tested-by: David Vrabel 
Signed-off-by: Michael Chan 
Signed-off-by: Nithin Nayak Sujir 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

vmxnet3: fix building without CONFIG_PCI_MSI

2014-04-01T23:58:59+00:00

commit 0a8d8c446b5429d15ff2d48f46e00d8a08552303 upstream.

Since commit d25f06ea466e "vmxnet3: fix netpoll race condition",
the vmxnet3 driver fails to build when CONFIG_PCI_MSI is disabled,
because it unconditionally references the vmxnet3_msix_rx()
function.

To fix this, use the same #ifdef in the caller that exists around
the function definition.

Signed-off-by: Arnd Bergmann 
Cc: Neil Horman 
Cc: Shreyas Bhatewara 
Cc: "VMware, Inc." 
Cc: "David S. Miller" 
Acked-by: Neil Horman 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

vmxnet3: fix netpoll race condition

2014-04-01T23:58:59+00:00

commit d25f06ea466ea521b563b76661180b4e44714ae6 upstream.

vmxnet3's netpoll driver is incorrectly coded.  It directly calls
vmxnet3_do_poll, which is the driver internal napi poll routine.  As the netpoll
controller method doesn't block real napi polls in any way, there is a potential
for race conditions in which the netpoll controller method and the napi poll
method run concurrently.  The result is data corruption causing panics such as this
one recently observed:
PID: 1371   TASK: ffff88023762caa0  CPU: 1   COMMAND: "rs:main Q:Reg"
 #0 [ffff88023abd5780] machine_kexec at ffffffff81038f3b
 #1 [ffff88023abd57e0] crash_kexec at ffffffff810c5d92
 #2 [ffff88023abd58b0] oops_end at ffffffff8152b570
 #3 [ffff88023abd58e0] die at ffffffff81010e0b
 #4 [ffff88023abd5910] do_trap at ffffffff8152add4
 #5 [ffff88023abd5970] do_invalid_op at ffffffff8100cf95
 #6 [ffff88023abd5a10] invalid_op at ffffffff8100bf9b
    [exception RIP: vmxnet3_rq_rx_complete+1968]
    RIP: ffffffffa00f1e80  RSP: ffff88023abd5ac8  RFLAGS: 00010086
    RAX: 0000000000000000  RBX: ffff88023b5dcee0  RCX: 00000000000000c0
    RDX: 0000000000000000  RSI: 00000000000005f2  RDI: ffff88023b5dcee0
    RBP: ffff88023abd5b48   R8: 0000000000000000   R9: ffff88023a3b6048
    R10: 0000000000000000  R11: 0000000000000002  R12: ffff8802398d4cd8
    R13: ffff88023af35140  R14: ffff88023b60c890  R15: 0000000000000000
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #7 [ffff88023abd5b50] vmxnet3_do_poll at ffffffffa00f204a [vmxnet3]
 #8 [ffff88023abd5b80] vmxnet3_netpoll at ffffffffa00f209c [vmxnet3]
 #9 [ffff88023abd5ba0] netpoll_poll_dev at ffffffff81472bb7

The fix is to do as other drivers do, and have the poll controller call the top
half interrupt handler, which schedules a napi poll properly to recieve frames

Tested by myself, successfully.

Signed-off-by: Neil Horman 
CC: Shreyas Bhatewara 
CC: "VMware, Inc." 
CC: "David S. Miller" 
Reviewed-by: Shreyas N Bhatewara 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

mwifiex: copy AP's HT capability info correctly

2014-04-01T23:58:58+00:00

commit c99b1861c232e1f641f13b8645e0febb3712cc71 upstream.

While preparing association request, intersection of device's HT
capability information and corresponding fields advertised by AP
is used.

This patch fixes an error while copying this field from AP's
beacon.

Signed-off-by: Amitkumar Karwar 
Signed-off-by: Bing Zhao 
Signed-off-by: John W. Linville 
Signed-off-by: Ben Hutchings

can: flexcan: flexcan_remove(): add missing netif_napi_del()

2014-04-01T23:58:57+00:00

commit d96e43e8fce28cf97df576a07af9d65657a41a6f upstream.

This patch adds the missing netif_napi_del() to the flexcan_remove() function.

Signed-off-by: Marc Kleine-Budde 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

can: flexcan: flexcan_open(): fix error path if flexcan_chip_start() fails

2014-04-01T23:58:57+00:00

commit 7e9e148af01ef388efb6e2490805970be4622792 upstream.

If flexcan_chip_start() in flexcan_open() fails, the interrupt is not freed,
this patch adds the missing cleanup.

Signed-off-by: Marc Kleine-Budde 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings