<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-toradex.git/drivers/net, branch v3.5.7</title>
<subtitle>Linux kernel for Apalis and Colibri modules</subtitle>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/'/>
<entry>
<title>pppoe: drop PPPOX_ZOMBIEs in pppoe_release</title>
<updated>2012-10-12T20:47:03+00:00</updated>
<author>
<name>Xiaodong Xu</name>
<email>stid.smth@gmail.com</email>
</author>
<published>2012-09-22T00:09:32+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=0da0ab0257462b974ccdc7e603bf8a4c2976de44'/>
<id>0da0ab0257462b974ccdc7e603bf8a4c2976de44</id>
<content type='text'>
[ Upstream commit 2b018d57ff18e5405823e5cb59651a5b4d946d7b ]

When PPPOE is running over a virtual ethernet interface (e.g., a
bonding interface) and the user tries to delete the interface in case
the PPPOE state is ZOMBIE, the kernel will loop forever while
unregistering net_device for the reference count is not decreased to
zero which should have been done with dev_put().

Signed-off-by: Xiaodong Xu &lt;stid.smth@gmail.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 2b018d57ff18e5405823e5cb59651a5b4d946d7b ]

When PPPOE is running over a virtual ethernet interface (e.g., a
bonding interface) and the user tries to delete the interface in case
the PPPOE state is ZOMBIE, the kernel will loop forever while
unregistering net_device for the reference count is not decreased to
zero which should have been done with dev_put().

Signed-off-by: Xiaodong Xu &lt;stid.smth@gmail.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>sierra_net: Endianess bug fix.</title>
<updated>2012-10-12T20:47:01+00:00</updated>
<author>
<name>Lennart Sorensen</name>
<email>lsorense@csclub.uwaterloo.ca</email>
</author>
<published>2012-09-07T12:14:02+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=a80d46ef826b49c723cb618ca25281dc5c35b6c5'/>
<id>a80d46ef826b49c723cb618ca25281dc5c35b6c5</id>
<content type='text'>
[ Upstream commit 2120c52da6fe741454a60644018ad2a6abd957ac ]

I discovered I couldn't get sierra_net to work on a powerpc.  Turns out
the firmware attribute check assumes the system is little endian and
hence fails because the attributes is a 16 bit value.

Signed-off-by: Len Sorensen &lt;lsorense@csclub.uwaterloo.ca&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 2120c52da6fe741454a60644018ad2a6abd957ac ]

I discovered I couldn't get sierra_net to work on a powerpc.  Turns out
the firmware attribute check assumes the system is little endian and
hence fails because the attributes is a 16 bit value.

Signed-off-by: Len Sorensen &lt;lsorense@csclub.uwaterloo.ca&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>netxen: check for root bus in netxen_mask_aer_correctable</title>
<updated>2012-10-12T20:47:00+00:00</updated>
<author>
<name>Nikolay Aleksandrov</name>
<email>nikolay@redhat.com</email>
</author>
<published>2012-09-14T05:50:03+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=62d95cbcb4427290d1c2bd612ed4a4626d38ea1e'/>
<id>62d95cbcb4427290d1c2bd612ed4a4626d38ea1e</id>
<content type='text'>
[ Upstream commit e4d1aa40e363ed3e0486aeeeb0d173f7f822737e ]

Add a check if pdev-&gt;bus-&gt;self == NULL (root bus). When attaching
a netxen NIC to a VM it can be on the root bus and the guest would
crash in netxen_mask_aer_correctable() because of a NULL pointer
dereference if CONFIG_PCIEAER is present.

Signed-off-by: Nikolay Aleksandrov &lt;nikolay@redhat.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit e4d1aa40e363ed3e0486aeeeb0d173f7f822737e ]

Add a check if pdev-&gt;bus-&gt;self == NULL (root bus). When attaching
a netxen NIC to a VM it can be on the root bus and the guest would
crash in netxen_mask_aer_correctable() because of a NULL pointer
dereference if CONFIG_PCIEAER is present.

Signed-off-by: Nikolay Aleksandrov &lt;nikolay@redhat.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ixp4xx_hss: fix build failure due to missing linux/module.h inclusion</title>
<updated>2012-10-12T20:47:00+00:00</updated>
<author>
<name>Florian Fainelli</name>
<email>florian@openwrt.org</email>
</author>
<published>2012-09-10T12:06:58+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=865a8a00dea9f7262f3470d272d75c427a46d78e'/>
<id>865a8a00dea9f7262f3470d272d75c427a46d78e</id>
<content type='text'>
[ Upstream commit 0b836ddde177bdd5790ade83772860940bd481ea ]

Commit 36a1211970193ce215de50ed1e4e1272bc814df1 (netprio_cgroup.h:
dont include module.h from other includes) made the following build
error on ixp4xx_hss pop up:

  CC [M]  drivers/net/wan/ixp4xx_hss.o
 drivers/net/wan/ixp4xx_hss.c:1412:20: error: expected ';', ',' or ')'
 before string constant
 drivers/net/wan/ixp4xx_hss.c:1413:25: error: expected ';', ',' or ')'
 before string constant
 drivers/net/wan/ixp4xx_hss.c:1414:21: error: expected ';', ',' or ')'
 before string constant
 drivers/net/wan/ixp4xx_hss.c:1415:19: error: expected ';', ',' or ')'
 before string constant
 make[8]: *** [drivers/net/wan/ixp4xx_hss.o] Error 1

This was previously hidden because ixp4xx_hss includes linux/hdlc.h which
includes linux/netdevice.h which includes linux/netprio_cgroup.h which
used to include linux/module.h. The real issue was actually present since
the initial commit that added this driver since it uses macros from
linux/module.h without including this file.

Signed-off-by: Florian Fainelli &lt;florian@openwrt.org&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 0b836ddde177bdd5790ade83772860940bd481ea ]

Commit 36a1211970193ce215de50ed1e4e1272bc814df1 (netprio_cgroup.h:
dont include module.h from other includes) made the following build
error on ixp4xx_hss pop up:

  CC [M]  drivers/net/wan/ixp4xx_hss.o
 drivers/net/wan/ixp4xx_hss.c:1412:20: error: expected ';', ',' or ')'
 before string constant
 drivers/net/wan/ixp4xx_hss.c:1413:25: error: expected ';', ',' or ')'
 before string constant
 drivers/net/wan/ixp4xx_hss.c:1414:21: error: expected ';', ',' or ')'
 before string constant
 drivers/net/wan/ixp4xx_hss.c:1415:19: error: expected ';', ',' or ')'
 before string constant
 make[8]: *** [drivers/net/wan/ixp4xx_hss.o] Error 1

This was previously hidden because ixp4xx_hss includes linux/hdlc.h which
includes linux/netdevice.h which includes linux/netprio_cgroup.h which
used to include linux/module.h. The real issue was actually present since
the initial commit that added this driver since it uses macros from
linux/module.h without including this file.

Signed-off-by: Florian Fainelli &lt;florian@openwrt.org&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net: ethernet: davinci_cpdma: decrease the desc count when cleaning up the remaining packets</title>
<updated>2012-10-12T20:47:00+00:00</updated>
<author>
<name>htbegin</name>
<email>hotforest@gmail.com</email>
</author>
<published>2012-10-01T16:42:43+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=cec7eeae3020631fad8f0b2d723f39f8bfd42863'/>
<id>cec7eeae3020631fad8f0b2d723f39f8bfd42863</id>
<content type='text'>
[ Upstream commit ffb5ba90017505a19e238e986e6d33f09e4df765 ]

chan-&gt;count is used by rx channel. If the desc count is not updated by
the clean up loop in cpdma_chan_stop, the value written to the rxfree
register in cpdma_chan_start will be incorrect.

Signed-off-by: Tao Hou &lt;hotforest@gmail.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit ffb5ba90017505a19e238e986e6d33f09e4df765 ]

chan-&gt;count is used by rx channel. If the desc count is not updated by
the clean up loop in cpdma_chan_stop, the value written to the rxfree
register in cpdma_chan_start will be incorrect.

Signed-off-by: Tao Hou &lt;hotforest@gmail.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bnx2x: fix rx checksum validation for IPv6</title>
<updated>2012-10-12T20:46:57+00:00</updated>
<author>
<name>Michal Schmidt</name>
<email>mschmidt@redhat.com</email>
</author>
<published>2012-09-13T12:59:44+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=35f69d03dfa7baae3f27caaac2976fe161c2a3b0'/>
<id>35f69d03dfa7baae3f27caaac2976fe161c2a3b0</id>
<content type='text'>
[ Upstream commit e488921f44765e8ab6c48ca35e3f6b78df9819df ]

Commit d6cb3e41 "bnx2x: fix checksum validation" caused a performance
regression for IPv6. Rx checksum offload does not work. IPv6 packets
are passed to the stack with CHECKSUM_NONE.

The hardware obviously cannot perform IP checksum validation for IPv6,
because there is no checksum in the IPv6 header. This should not prevent
us from setting CHECKSUM_UNNECESSARY.

Tested on BCM57711.

Signed-off-by: Michal Schmidt &lt;mschmidt@redhat.com&gt;
Acked-by: Eric Dumazet &lt;edumazet@google.com&gt;
Acked-by: Eilon Greenstein &lt;eilong@broadcom.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit e488921f44765e8ab6c48ca35e3f6b78df9819df ]

Commit d6cb3e41 "bnx2x: fix checksum validation" caused a performance
regression for IPv6. Rx checksum offload does not work. IPv6 packets
are passed to the stack with CHECKSUM_NONE.

The hardware obviously cannot perform IP checksum validation for IPv6,
because there is no checksum in the IPv6 header. This should not prevent
us from setting CHECKSUM_UNNECESSARY.

Tested on BCM57711.

Signed-off-by: Michal Schmidt &lt;mschmidt@redhat.com&gt;
Acked-by: Eric Dumazet &lt;edumazet@google.com&gt;
Acked-by: Eilon Greenstein &lt;eilong@broadcom.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>rapidio/rionet: fix multicast packet transmit logic</title>
<updated>2012-10-12T20:46:56+00:00</updated>
<author>
<name>Alexandre Bounine</name>
<email>alexandre.bounine@idt.com</email>
</author>
<published>2012-10-05T00:15:48+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=7a3cfd58d45ec9602a8d766711bc348ac8d97be6'/>
<id>7a3cfd58d45ec9602a8d766711bc348ac8d97be6</id>
<content type='text'>
commit 7c4a6106d6451fc03c491e61df37c044505d843a upstream.

Fix multicast packet transmit logic to account for repetitive transmission
of single skb:
- correct check for available buffers (this bug may produce NULL pointer
  crash dump in case of heavy traffic);
- update skb user count (incorrect user counter causes a warning dump from
  net_tx_action routine during multicast transfers in systems with three or
  more rionet participants).

Signed-off-by: Alexandre Bounine &lt;alexandre.bounine@idt.com&gt;
Cc: Matt Porter &lt;mporter@kernel.crashing.org&gt;
Cc: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 7c4a6106d6451fc03c491e61df37c044505d843a upstream.

Fix multicast packet transmit logic to account for repetitive transmission
of single skb:
- correct check for available buffers (this bug may produce NULL pointer
  crash dump in case of heavy traffic);
- update skb user count (incorrect user counter causes a warning dump from
  net_tx_action routine during multicast transfers in systems with three or
  more rionet participants).

Signed-off-by: Alexandre Bounine &lt;alexandre.bounine@idt.com&gt;
Cc: Matt Porter &lt;mporter@kernel.crashing.org&gt;
Cc: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>ixgbe: fix PTP ethtool timestamping function</title>
<updated>2012-10-12T20:46:56+00:00</updated>
<author>
<name>Jacob Keller</name>
<email>jacob.e.keller@intel.com</email>
</author>
<published>2012-09-21T07:23:20+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=d277e741c14f1b3e1fecf96e3fb98ae62d426f00'/>
<id>d277e741c14f1b3e1fecf96e3fb98ae62d426f00</id>
<content type='text'>
commit 1cc92eb871d6cbb1da038b4bcd89eec3c73b9781 upstream.

This patch fixes a development issue that occurred due to invalid modes reported
in the ethtool get_ts_info function. The issue is resolved by removing
unsupported modes from the Rx supported list.

Signed-off-by: Jacob Keller &lt;jacob.e.keller@intel.com&gt;
Tested-by: Phil Schmitt &lt;phillip.j.schmitt@intel.com&gt;
Signed-off-by: Jeff Kirsher &lt;jeffrey.t.kirsher@intel.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 1cc92eb871d6cbb1da038b4bcd89eec3c73b9781 upstream.

This patch fixes a development issue that occurred due to invalid modes reported
in the ethtool get_ts_info function. The issue is resolved by removing
unsupported modes from the Rx supported list.

Signed-off-by: Jacob Keller &lt;jacob.e.keller@intel.com&gt;
Tested-by: Phil Schmitt &lt;phillip.j.schmitt@intel.com&gt;
Signed-off-by: Jeff Kirsher &lt;jeffrey.t.kirsher@intel.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>can: mscan-mpc5xxx: fix return value check in mpc512x_can_get_clock()</title>
<updated>2012-10-07T15:35:56+00:00</updated>
<author>
<name>Wei Yongjun</name>
<email>yongjun_wei@trendmicro.com.cn</email>
</author>
<published>2012-09-21T07:09:47+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=b902acd7fd531880dcbc74e66ea1c1ce1b64d622'/>
<id>b902acd7fd531880dcbc74e66ea1c1ce1b64d622</id>
<content type='text'>
commit f61bd0585dfc7d99db4936d7467de4ca8e2f7ea0 upstream.

In case of error, the function clk_get() returns ERR_PTR()
and never returns NULL pointer. The NULL test in the error
handling should be replaced with IS_ERR().

dpatch engine is used to auto generated this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun &lt;yongjun_wei@trendmicro.com.cn&gt;
Acked-by: Wolfgang Grandegger &lt;wg@grandegger.com&gt;
Signed-off-by: Marc Kleine-Budde &lt;mkl@pengutronix.de&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit f61bd0585dfc7d99db4936d7467de4ca8e2f7ea0 upstream.

In case of error, the function clk_get() returns ERR_PTR()
and never returns NULL pointer. The NULL test in the error
handling should be replaced with IS_ERR().

dpatch engine is used to auto generated this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun &lt;yongjun_wei@trendmicro.com.cn&gt;
Acked-by: Wolfgang Grandegger &lt;wg@grandegger.com&gt;
Signed-off-by: Marc Kleine-Budde &lt;mkl@pengutronix.de&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>ath9k: Disable ASPM only for AR9285</title>
<updated>2012-10-07T15:35:54+00:00</updated>
<author>
<name>Sujith Manoharan</name>
<email>c_manoha@qualcomm.com</email>
</author>
<published>2012-09-21T18:44:28+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=663a63823c810174117277086c7e6bf605e482ee'/>
<id>663a63823c810174117277086c7e6bf605e482ee</id>
<content type='text'>
commit 046b6802c8d3c8a57448485513bf7291633e0fa3 upstream.

Currently, ASPM is disabled for all WLAN+BT combo chipsets
when BTCOEX is enabled. This is incorrect since the workaround
is required only for WB195, which is a AR9285+AR3011 combo
solution. Fix this by checking for the HW version when enabling
the workaround.

Signed-off-by: Sujith Manoharan &lt;c_manoha@qca.qualcomm.com&gt;
Tested-by: Paul Stewart &lt;pstew@chromium.org&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 046b6802c8d3c8a57448485513bf7291633e0fa3 upstream.

Currently, ASPM is disabled for all WLAN+BT combo chipsets
when BTCOEX is enabled. This is incorrect since the workaround
is required only for WB195, which is a AR9285+AR3011 combo
solution. Fix this by checking for the HW version when enabling
the workaround.

Signed-off-by: Sujith Manoharan &lt;c_manoha@qca.qualcomm.com&gt;
Tested-by: Paul Stewart &lt;pstew@chromium.org&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
</feed>
