linux-toradex.git/drivers/net, branch v4.14-rc3 Linux kernel for Apalis and Colibri modules net: phy: Fix truncation of large IRQ numbers in phy_attached_print() 2017-09-22T03:35:17+00:00 Geert Uytterhoeven geert+renesas@glider.be 2017-09-21T11:27:02+00:00 059fbe8b5171960bd5c2371bb327ac18733773de Given NR_IRQS is 2048 on sparc64, and even 32784 on alpha, 3 digits is not enough to represent interrupt numbers on all architectures. Hence PHY interrupt numbers may be truncated during printing. Increase the buffer size from 4 to 8 bytes to fix this. Fixes: 5e369aefdce4818c ("net: stmmac: Delete dead code for MDIO registration") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 
Given NR_IRQS is 2048 on sparc64, and even 32784 on alpha, 3 digits is
not enough to represent interrupt numbers on all architectures.  Hence
PHY interrupt numbers may be truncated during printing.

Increase the buffer size from 4 to 8 bytes to fix this.

Fixes: 5e369aefdce4818c ("net: stmmac: Delete dead code for MDIO registration")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: stmmac: Cocci spatch "of_table" 2017-09-21T22:26:26+00:00 Thomas Meyer thomas@m3y3r.de 2017-09-21T06:24:27+00:00 f0ef1f4f2b772c0a1c8b35a6ae3edf974cc110dd Make sure (of/i2c/platform)_device_id tables are NULL terminated. Found by coccinelle spatch "misc/of_table.cocci" Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: David S. Miller <davem@davemloft.net> 
Make sure (of/i2c/platform)_device_id tables are NULL terminated.
Found by coccinelle spatch "misc/of_table.cocci"

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
lan78xx: Use default values loaded from EEPROM/OTP after reset 2017-09-21T22:22:53+00:00 Nisar Sayed Nisar.Sayed@microchip.com 2017-09-20T21:06:38+00:00 e365280521029c9366bab038915274ddaa1b7195 Use default value of auto duplex and auto speed values loaded from EEPROM/OTP after reset. The LAN78xx allows platform configurations to be loaded from EEPROM/OTP. Ex: When external phy is connected, the MAC can be configured to have correct auto speed, auto duplex, auto polarity configured from the EEPROM/OTP. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Use default value of auto duplex and auto speed values loaded
from EEPROM/OTP after reset. The LAN78xx allows platform
configurations to be loaded from EEPROM/OTP.
Ex: When external phy is connected, the MAC can be configured to
have correct auto speed, auto duplex, auto polarity configured
from the EEPROM/OTP.

Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
lan78xx: Allow EEPROM write for less than MAX_EEPROM_SIZE 2017-09-21T22:22:53+00:00 Nisar Sayed Nisar.Sayed@microchip.com 2017-09-20T21:06:37+00:00 c077682282dd34c75e8477c22dffe7c9aebc6e98 Allow EEPROM write for less than MAX_EEPROM_SIZE Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Allow EEPROM write for less than MAX_EEPROM_SIZE

Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
lan78xx: Fix for eeprom read/write when device auto suspend 2017-09-21T22:22:53+00:00 Nisar Sayed Nisar.Sayed@microchip.com 2017-09-20T21:06:36+00:00 8a7ffeb795f864dd605b579c05934cba95dc8ad3 Fix for eeprom read/write when device auto suspend Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Fix for eeprom read/write when device auto suspend

Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: Keep reporting transceiver type 2017-09-21T22:20:40+00:00 Florian Fainelli f.fainelli@gmail.com 2017-09-20T22:52:14+00:00 ceb628134a75564d7bfa8e4ef902e6e588339e11 With commit 2d55173e71b0 ("phy: add generic function to support ksetting support"), we lost the ability to report the transceiver type like we used to. Now that we have added back the transceiver type to ethtool_link_settings, we can report it back like we used to and have no loss of information. Fixes: 3f1ac7a700d0 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API") Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
With commit 2d55173e71b0 ("phy: add generic function to support
ksetting support"), we lost the ability to report the transceiver type
like we used to. Now that we have added back the transceiver type to
ethtool_link_settings, we can report it back like we used to and have no
loss of information.

Fixes: 3f1ac7a700d0 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API")
Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: qcom/emac: add software control for pause frame mode 2017-09-21T22:19:30+00:00 Timur Tabi timur@codeaurora.org 2017-09-20T20:32:53+00:00 4a7a3860caac1a8779e8c459d8abe21b111798d6 The EMAC has the option of sending only a single pause frame when flow control is enabled and the RX queue is full. Although sending only one pause frame has little value, this would allow admins to enable automatic flow control without having to worry about the EMAC flooding nearby switches with pause frames if the kernel hangs. The option is enabled by using the single-pause-mode private flag. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net> 
The EMAC has the option of sending only a single pause frame when
flow control is enabled and the RX queue is full.  Although sending
only one pause frame has little value, this would allow admins to
enable automatic flow control without having to worry about the EMAC
flooding nearby switches with pause frames if the kernel hangs.

The option is enabled by using the single-pause-mode private flag.

Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
hv_netvsc: fix send buffer failure on MTU change 2017-09-21T22:17:16+00:00 Alex Ng alexng@microsoft.com 2017-09-20T18:17:35+00:00 0ab09befdbb7ca9b969d6206108629ddff43876e If MTU is changed the host would reject the send buffer change. This problem is result of recent change to allow changing send buffer size. Every time we change the MTU, we store the previous net_device section count before destroying the buffer, but we don’t store the previous section size. When we reinitialize the buffer, its size is calculated by multiplying the previous count and previous size. Since we continuously increase the MTU, the host returns us a decreasing count value while the section size is reinitialized to 1728 bytes every time. This eventually leads to a condition where the calculated buf_size is so small that the host rejects it. Fixes: 8b5327975ae1 ("netvsc: allow controlling send/recv buffer size") Signed-off-by: Alex Ng <alexng@microsoft.com> Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
If MTU is changed the host would reject the send buffer change.
This problem is result of recent change to allow changing send
buffer size.

Every time we change the MTU, we store the previous net_device section
count before destroying the buffer, but we don’t store the previous
section size. When we reinitialize the buffer, its size is calculated
by multiplying the previous count and previous size. Since we
continuously increase the MTU, the host returns us a decreasing count
value while the section size is reinitialized to 1728 bytes every
time.

This eventually leads to a condition where the calculated buf_size is
so small that the host rejects it.

Fixes: 8b5327975ae1 ("netvsc: allow controlling send/recv buffer size")
Signed-off-by: Alex Ng <alexng@microsoft.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: hns3: Fix for pri to tc mapping in TM 2017-09-20T23:15:40+00:00 Yunsheng Lin linyunsheng@huawei.com 2017-09-20T10:52:58+00:00 c5795c5308af81568d1573598716091120c85a38 Current mapping between pri and tc is one to one, so user can't map multi priorities to the same tc. This patch changes the mapping to many to one. Fixes: 848440544b41f ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Current mapping between pri and tc is one to one,
so user can't map multi priorities to the same tc.
This patch changes the mapping to many to one.

Fixes: 848440544b41f ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: hns3: Fix for setting rss_size incorrectly 2017-09-20T23:15:40+00:00 Yunsheng Lin linyunsheng@huawei.com 2017-09-20T10:52:57+00:00 68ece54efd417d415462adbaa2700cba50de3ff6 rss_size is 1, 2, 4, 8, 16, 32, 64, 128, but acutal tc queue size can be any u16 less than 128. If tc queue size is 5, we set the rss_size to 8, indirection table will be used to limit the size of actual queue size. It may cause dropping of receiving packet in hardware if rss_size is not set correctly. For now, each TC has the same rss size. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
rss_size is 1, 2, 4, 8, 16, 32, 64, 128, but acutal tc queue
size can be any u16 less than 128. If tc queue size is 5, we
set the rss_size to 8, indirection table will be used to limit
the size of actual queue size.
It may cause dropping of receiving packet in hardware if
rss_size is not set correctly.
For now, each TC has the same rss size.

Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>