linux-toradex.git/drivers/net, branch v4.4.92

brcmfmac: setup passive scan if requested by user-space

2017-10-12T09:27:35+00:00

commit 35f62727df0ed8e5e4857e162d94fd46d861f1cf upstream.

The driver was not properly configuring firmware with regard to the
type of scan. It always performed an active scan even when user-space
was requesting for passive scan, ie. the scan request was done without
any SSIDs specified.

Reported-by: Huang, Jiangyang 
Reviewed-by: Hante Meuleman 
Reviewed-by: Pieter-Paul Giesberts 
Reviewed-by: Franky Lin 
Signed-off-by: Arend van Spriel 
Signed-off-by: Kalle Valo 
Signed-off-by: Greg Kroah-Hartman

USB: core: harden cdc_parse_cdc_header

2017-10-12T09:27:33+00:00

commit 2e1c42391ff2556387b3cb6308b24f6f65619feb upstream.

Andrey Konovalov reported a possible out-of-bounds problem for the
cdc_parse_cdc_header function.  He writes:
	It looks like cdc_parse_cdc_header() doesn't validate buflen
	before accessing buffer[1], buffer[2] and so on. The only check
	present is while (buflen > 0).

So fix this issue up by properly validating the buffer length matches
what the descriptor says it is.

Reported-by: Andrey Konovalov 
Tested-by: Andrey Konovalov 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: add workaround to disable wide channels in 5GHz

2017-10-12T09:27:33+00:00

commit 01a9c948a09348950515bf2abb6113ed83e696d8 upstream.

The OTP in some SKUs have erroneously allowed 40MHz and 80MHz channels
in the 5.2GHz band.  The firmware has been modified to not allow this
in those SKUs, so the driver needs to do the same otherwise the
firmware will assert when we try to use it.

Signed-off-by: Luca Coelho 
Signed-off-by: Greg Kroah-Hartman

usb: plusb: Add support for PL-27A1

2017-10-08T08:14:19+00:00

[ Upstream commit 6f2aee0c0de65013333bbc26fe50c9c7b09a37f7 ]

This patch adds support for the PL-27A1 by adding the appropriate
USB ID's. This chip is used in the goobay Active USB 3.0 Data Link
and Unitek Y-3501 cables.

Signed-off-by: Roman Spychała 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

team: fix memory leaks

2017-10-08T08:14:18+00:00

[ Upstream commit 72ec0bc64b9a5d8e0efcb717abfc757746b101b7 ]

In functions team_nl_send_port_list_get() and
team_nl_send_options_get(), pointer skb keeps the return value of
nlmsg_new(). When the call to genlmsg_put() fails, the memory is not
freed(). This will result in memory leak bugs.

Fixes: 9b00cf2d1024 ("team: implement multipart netlink messages for options transfers")
Signed-off-by: Pan Bian 
Acked-by: Jiri Pirko 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

sh_eth: use correct name for ECMR_MPDE bit

2017-10-08T08:14:16+00:00

[ Upstream commit 6dcf45e514974a1ff10755015b5e06746a033e5f ]

This bit was wrongly named due to a typo, Sergei checked the SH7734/63
manuals and this bit should be named MPDE.

Suggested-by: Sergei Shtylyov 
Signed-off-by: Niklas Söderlund 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

igb: re-assign hw address pointer on reset after PCI error

2017-10-08T08:14:16+00:00

[ Upstream commit 69b97cf6dbce7403845a28bbc75d57f5be7b12ac ]

Whenever the igb driver detects the result of a read operation returns
a value composed only by F's (like 0xFFFFFFFF), it will detach the
net_device, clear the hw_addr pointer and warn to the user that adapter's
link is lost - those steps happen on igb_rd32().

In case a PCI error happens on Power architecture, there's a recovery
mechanism called EEH, that will reset the PCI slot and call driver's
handlers to reset the adapter and network functionality as well.

We observed that once hw_addr is NULL after the error is detected on
igb_rd32(), it's never assigned back, so in the process of resetting
the network functionality we got a NULL pointer dereference in both
igb_configure_tx_ring() and igb_configure_rx_ring(). In order to avoid
such bug, this patch re-assigns the hw_addr value in the slot_reset
handler.

Reported-by: Anthony H Thai 
Reported-by: Harsha Thyagaraja 
Signed-off-by: Guilherme G Piccoli 
Tested-by: Aaron Brown 
Signed-off-by: Jeff Kirsher 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

gianfar: Fix Tx flow control deactivation

2017-09-27T09:00:11+00:00

[ Upstream commit 5d621672bc1a1e5090c1ac5432a18c79e0e13e03 ]

The wrong register is checked for the Tx flow control bit,
it should have been maccfg1 not maccfg2.
This went unnoticed for so long probably because the impact is
hardly visible, not to mention the tangled code from adjust_link().
First, link flow control (i.e. handling of Rx/Tx link level pause frames)
is disabled by default (needs to be enabled via 'ethtool -A').
Secondly, maccfg2 always returns 0 for tx_flow_oldval (except for a few
old boards), which results in Tx flow control remaining always on
once activated.

Fixes: 45b679c9a3ccd9e34f28e6ec677b812a860eb8eb ("gianfar: Implement PAUSE frame generation support")
Signed-off-by: Claudiu Manoil 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

Revert "net: phy: Correctly process PHY_HALTED in phy_stop_machine()"

2017-09-27T09:00:11+00:00

[ Upstream commit ebc8254aeae34226d0bc8fda309fd9790d4dccfe ]

This reverts commit 7ad813f208533cebfcc32d3d7474dc1677d1b09a ("net: phy:
Correctly process PHY_HALTED in phy_stop_machine()") because it is
creating the possibility for a NULL pointer dereference.

David Daney provide the following call trace and diagram of events:

When ndo_stop() is called we call:

 phy_disconnect()
    +---> phy_stop_interrupts() implies: phydev->irq = PHY_POLL;
    +---> phy_stop_machine()
    |      +---> phy_state_machine()
    |              +----> queue_delayed_work(): Work queued.
    +--->phy_detach() implies: phydev->attached_dev = NULL;

Now at a later time the queued work does:

 phy_state_machine()
    +---->netif_carrier_off(phydev->attached_dev): Oh no! It is NULL:

 CPU 12 Unable to handle kernel paging request at virtual address
0000000000000048, epc == ffffffff80de37ec, ra == ffffffff80c7c
Oops[#1]:
CPU: 12 PID: 1502 Comm: kworker/12:1 Not tainted 4.9.43-Cavium-Octeon+ #1
Workqueue: events_power_efficient phy_state_machine
task: 80000004021ed100 task.stack: 8000000409d70000
$ 0   : 0000000000000000 ffffffff84720060 0000000000000048 0000000000000004
$ 4   : 0000000000000000 0000000000000001 0000000000000004 0000000000000000
$ 8   : 0000000000000000 0000000000000000 00000000ffff98f3 0000000000000000
$12   : 8000000409d73fe0 0000000000009c00 ffffffff846547c8 000000000000af3b
$16   : 80000004096bab68 80000004096babd0 0000000000000000 80000004096ba800
$20   : 0000000000000000 0000000000000000 ffffffff81090000 0000000000000008
$24   : 0000000000000061 ffffffff808637b0
$28   : 8000000409d70000 8000000409d73cf0 80000000271bd300 ffffffff80c7804c
Hi    : 000000000000002a
Lo    : 000000000000003f
epc   : ffffffff80de37ec netif_carrier_off+0xc/0x58
ra    : ffffffff80c7804c phy_state_machine+0x48c/0x4f8
Status: 14009ce3        KX SX UX KERNEL EXL IE
Cause : 00800008 (ExcCode 02)
BadVA : 0000000000000048
PrId  : 000d9501 (Cavium Octeon III)
Modules linked in:
Process kworker/12:1 (pid: 1502, threadinfo=8000000409d70000,
task=80000004021ed100, tls=0000000000000000)
Stack : 8000000409a54000 80000004096bab68 80000000271bd300 80000000271c1e00
        0000000000000000 ffffffff808a1708 8000000409a54000 80000000271bd300
        80000000271bd320 8000000409a54030 ffffffff80ff0f00 0000000000000001
        ffffffff81090000 ffffffff808a1ac0 8000000402182080 ffffffff84650000
        8000000402182080 ffffffff84650000 ffffffff80ff0000 8000000409a54000
        ffffffff808a1970 0000000000000000 80000004099e8000 8000000402099240
        0000000000000000 ffffffff808a8598 0000000000000000 8000000408eeeb00
        8000000409a54000 00000000810a1d00 0000000000000000 8000000409d73de8
        8000000409d73de8 0000000000000088 000000000c009c00 8000000409d73e08
        8000000409d73e08 8000000402182080 ffffffff808a84d0 8000000402182080
        ...
Call Trace:
[] netif_carrier_off+0xc/0x58
[] phy_state_machine+0x48c/0x4f8
[] process_one_work+0x158/0x368
[] worker_thread+0x150/0x4c0
[] kthread+0xc8/0xe0
[] ret_from_kernel_thread+0x14/0x1c

The original motivation for this change originated from Marc Gonzales
indicating that his network driver did not have its adjust_link callback
executing with phydev->link = 0 while he was expecting it.

PHYLIB has never made any such guarantees ever because phy_stop() merely just
tells the workqueue to move into PHY_HALTED state which will happen
asynchronously.

Reported-by: Geert Uytterhoeven 
Reported-by: David Daney 
Fixes: 7ad813f20853 ("net: phy: Correctly process PHY_HALTED in phy_stop_machine()")
Signed-off-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

qlge: avoid memcpy buffer overflow

2017-09-27T09:00:11+00:00

[ Upstream commit e58f95831e7468d25eb6e41f234842ecfe6f014f ]

gcc-8.0.0 (snapshot) points out that we copy a variable-length string
into a fixed length field using memcpy() with the destination length,
and that ends up copying whatever follows the string:

    inlined from 'ql_core_dump' at drivers/net/ethernet/qlogic/qlge/qlge_dbg.c:1106:2:
drivers/net/ethernet/qlogic/qlge/qlge_dbg.c:708:2: error: 'memcpy' reading 15 bytes from a region of size 14 [-Werror=stringop-overflow=]
  memcpy(seg_hdr->description, desc, (sizeof(seg_hdr->description)) - 1);

Changing it to use strncpy() will instead zero-pad the destination,
which seems to be the right thing to do here.

The bug is probably harmless, but it seems like a good idea to address
it in stable kernels as well, if only for the purpose of building with
gcc-8 without warnings.

Fixes: a61f80261306 ("qlge: Add ethtool register dump function.")
Signed-off-by: Arnd Bergmann 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman