no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")

To quote that commit,

  At -rc1 we'll need do a mechanical removal of no_llseek -

  git grep -l -w no_llseek | grep -v porting.rst | while read i; do
	sed -i '/\<no_llseek\>/d' $i
  done

  would do it.

Unfortunately, that hadn't been done.  Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
	.llseek = no_llseek,
so it's obviously safe.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull SoC update from Arnd Bergmann:
 "Convert ep93xx to devicetree

  This concludes a long journey towards replacing the old board files
  with devictree description on the Cirrus Logic EP93xx platform.

  Nikita Shubin has been working on this for a long time, for details
  see the last post on

    https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"

* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
  dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
  MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
  soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
  net: cirrus: use u8 for addr to calm down sparse
  dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
  dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
  pinctrl: ep93xx: Fix raster pins typo
  spi: ep93xx: update kerneldoc comments for ep93xx_spi
  clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
  clk: ep93xx: add module license
  dmaengine: cirrus: remove platform code
  ASoC: cirrus: edb93xx: Delete driver
  ARM: ep93xx: soc: drop defines
  ARM: ep93xx: delete all boardfiles
  ata: pata_ep93xx: remove legacy pinctrl use
  pwm: ep93xx: drop legacy pinctrl
  ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
  ARM: dts: ep93xx: Add EDB9302 DT
  ARM: dts: ep93xx: add ts7250 board
  ARM: dts: add Cirrus EP93XX SoC .dtsi
  ...

Pull networking fixes from Paolo Abeni:
 "Including fixes from netfilter.

  It looks like that most people are still traveling: both the ML volume
  and the processing capacity are low.

  Previous releases - regressions:

    - netfilter:
        - nf_reject_ipv6: fix nf_reject_ip6_tcphdr_put()
        - nf_tables: keep deleted flowtable hooks until after RCU

    - tcp: check skb is non-NULL in tcp_rto_delta_us()

    - phy: aquantia: fix -ETIMEDOUT PHY probe failure when firmware not
      present

    - eth: virtio_net: fix mismatched buf address when unmapping for
      small packets

    - eth: stmmac: fix zero-division error when disabling tc cbs

    - eth: bonding: fix unnecessary warnings and logs from
      bond_xdp_get_xmit_slave()

  Previous releases - always broken:

    - netfilter:
        - fix clash resolution for bidirectional flows
        - fix allocation with no memcg accounting

    - eth: r8169: add tally counter fields added with RTL8125

    - eth: ravb: fix rx and tx frame size limit"

* tag 'net-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
  selftests: netfilter: Avoid hanging ipvs.sh
  kselftest: add test for nfqueue induced conntrack race
  netfilter: nfnetlink_queue: remove old clash resolution logic
  netfilter: nf_tables: missing objects with no memcg accounting
  netfilter: nf_tables: use rcu chain hook list iterator from netlink dump path
  netfilter: ctnetlink: compile ctnetlink_label_size with CONFIG_NF_CONNTRACK_EVENTS
  netfilter: nf_reject: Fix build warning when CONFIG_BRIDGE_NETFILTER=n
  netfilter: nf_tables: Keep deleted flowtable hooks until after RCU
  docs: tproxy: ignore non-transparent sockets in iptables
  netfilter: ctnetlink: Guard possible unused functions
  selftests: netfilter: nft_tproxy.sh: add tcp tests
  selftests: netfilter: add reverse-clash resolution test case
  netfilter: conntrack: add clash resolution for reverse collisions
  netfilter: nf_nat: don't try nat source port reallocation for reverse dir clash
  selftests/net: packetdrill: increase timing tolerance in debug mode
  usbnet: fix cyclical race on disconnect with work queue
  net: stmmac: set PP_FLAG_DMA_SYNC_DEV only if XDP is enabled
  virtio_net: Fix mismatched buf address when unmapping for small packets
  bonding: Fix unnecessary warnings and logs from bond_xdp_get_xmit_slave()
  r8169: add missing MODULE_FIRMWARE entry for RTL8126A rev.b
  ...

Pull tty / serial driver updates from Greg KH:
 "Here is the "big" set of tty/serial driver updates for 6.12-rc1.

  Nothing major in here, just nice forward progress in the slow cleanup
  of the serial apis, and lots of other driver updates and fixes.

  Included in here are:

   - serial api updates from Jiri to make things more uniform and sane

   - 8250_platform driver cleanups

   - samsung serial driver fixes and updates

   - qcom-geni serial driver fixes from Johan for the bizarre UART
     engine that that chip seems to have. Hopefully it's in a better
     state now, but hardware designers still seem to come up with more
     ways to make broken UARTS 40+ years after this all should have
     finished.

   - sc16is7xx driver updates

   - omap 8250 driver updates

   - 8250_bcm2835aux driver updates

   - a few new serial driver bindings added

   - other serial minor driver updates

  All of these have been in linux-next for a long time with no reported
  problems"

* tag 'tty-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (65 commits)
  tty: serial: samsung: Fix serial rx on Apple A7-A9
  tty: serial: samsung: Fix A7-A11 serial earlycon SError
  tty: serial: samsung: Use bit manipulation macros for APPLE_S5L_*
  tty: rp2: Fix reset with non forgiving PCIe host bridges
  serial: 8250_aspeed_vuart: Enable module autoloading
  serial: qcom-geni: fix polled console corruption
  serial: qcom-geni: disable interrupts during console writes
  serial: qcom-geni: fix console corruption
  serial: qcom-geni: introduce qcom_geni_serial_poll_bitfield()
  serial: qcom-geni: fix arg types for qcom_geni_serial_poll_bit()
  soc: qcom: geni-se: add GP_LENGTH/IRQ_EN_SET/IRQ_EN_CLEAR registers
  serial: qcom-geni: fix false console tx restart
  serial: qcom-geni: fix fifo polling timeout
  tty: hvc: convert comma to semicolon
  mxser: convert comma to semicolon
  serial: 8250_bcm2835aux: Fix clock imbalance in PM resume
  serial: sc16is7xx: convert bitmask definitions to use BIT() macro
  serial: sc16is7xx: fix copy-paste errors in EFR_SWFLOWx_BIT constants
  serial: sc16is7xx: remove SC16IS7XX_MSR_DELTA_MASK
  serial: xilinx_uartps: Make cdns_rs485_supported static
  ...

Pull virtio updates from Michael Tsirkin:
 "Several new features here:

   - virtio-balloon supports new stats

   - vdpa supports setting mac address

   - vdpa/mlx5 suspend/resume as well as MKEY ops are now faster

   - virtio_fs supports new sysfs entries for queue info

   - virtio/vsock performance has been improved

  And fixes, cleanups all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (34 commits)
  vsock/virtio: avoid queuing packets when intermediate queue is empty
  vsock/virtio: refactor virtio_transport_send_pkt_work
  fw_cfg: Constify struct kobj_type
  vdpa/mlx5: Postpone MR deletion
  vdpa/mlx5: Introduce init/destroy for MR resources
  vdpa/mlx5: Rename mr_mtx -> lock
  vdpa/mlx5: Extract mr members in own resource struct
  vdpa/mlx5: Rename function
  vdpa/mlx5: Delete direct MKEYs in parallel
  vdpa/mlx5: Create direct MKEYs in parallel
  MAINTAINERS: add virtio-vsock driver in the VIRTIO CORE section
  virtio_fs: add sysfs entries for queue information
  virtio_fs: introduce virtio_fs_put_locked helper
  vdpa: Remove unused declarations
  vdpa/mlx5: Parallelize VQ suspend/resume for CVQ MQ command
  vdpa/mlx5: Small improvement for change_num_qps()
  vdpa/mlx5: Keep notifiers during suspend but ignore
  vdpa/mlx5: Parallelize device resume
  vdpa/mlx5: Parallelize device suspend
  vdpa/mlx5: Use async API for vq modify commands
  ...

The work can submit URBs and the URBs can schedule the work.
This cycle needs to be broken, when a device is to be stopped.
Use a flag to do so.
This is a design issue as old as the driver.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Link: https://patch.msgid.link/20240919123525.688065-1-oneukum@suse.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Commit 5fabb01207a2 ("net: stmmac: Add initial XDP support") sets
PP_FLAG_DMA_SYNC_DEV flag for page_pool unconditionally,
page_pool_recycle_direct() will call page_pool_dma_sync_for_device()
on every page even the page is not going to be reused by XDP program.

When XDP is not enabled, the page which holds the received buffer
will be recycled once the buffer is copied into new SKB by
skb_copy_to_linear_data(), then the MAC core will never reuse this
page any longer. Always setting PP_FLAG_DMA_SYNC_DEV wastes CPU cycles
on unnecessary calling of page_pool_dma_sync_for_device().

After this patch, up to 9% noticeable performance improvement was observed
on certain platforms.

Fixes: 5fabb01207a2 ("net: stmmac: Add initial XDP support")
Signed-off-by: Furong Xu <0x1207@gmail.com>
Link: https://patch.msgid.link/20240919121028.1348023-1-0x1207@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Currently, the virtio-net driver will perform a pre-dma-mapping for
small or mergeable RX buffer. But for small packets, a mismatched address
without VIRTNET_RX_PAD and xdp_headroom is used for unmapping.

That will result in unsynchronized buffers when SWIOTLB is enabled, for
example, when running as a TDX guest.

This patch unifies the address passed to the virtio core as the address of
the virtnet header and fixes the mismatched buffer address.

Changes from v2: unify the buf that passed to the virtio core in small
and merge mode.
Changes from v1: Use ctx to get xdp_headroom.

Fixes: 295525e29a5b ("virtio_net: merge dma operations when filling mergeable buffers")
Signed-off-by: Wenbo Li <liwenbo.martin@bytedance.com>
Signed-off-by: Jiahui Cen <cenjiahui@bytedance.com>
Signed-off-by: Ying Fang <fangying.tommy@bytedance.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20240919081351.51772-1-liwenbo.martin@bytedance.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Currently, commands that qualify as throttled can't be used via the
async API. That's due to the fact that the throttle semaphore can sleep
but the async API can't.

This patch allows throttling in the async API by using the tentative
variant of the semaphore and upon failure (semaphore at 0) returns EBUSY
to signal to the caller that they need to wait for the completion of
previously issued commands.

Furthermore, make sure that the semaphore is released in the callback.

Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Message-Id: <20240816090159.1967650-2-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>

Pull rdma updates from Jason Gunthorpe:
 "Usual collection of small improvements and fixes, nothing especially
  stands out to me here.

  The new multipath PCI feature is a sign of things to come, I think we
  will see more of this in the next 10 years. Broadcom and HNS continue
  to update their drivers for their new HW generations.

  Summary:

   - Bug fixes and minor improvments in cxgb4, siw, mlx5, rxe, efa, rts,
     hfi, erdma, hns, irdma

   - Code cleanups/typos/etc. Tidy alloc_ordered_workqueue() calls

   - Multipath PCI for mlx5

   - Variable size work queue, SRQ changes, and relaxed ordering for new
     bnxt HW

   - New ODP fault resolution FW protocol in mlx5

   - New 'rdma monitor' netlink mechanism"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
  RDMA/bnxt_re: Remove the unused variable en_dev
  RDMA/nldev: Add missing break in rdma_nl_notify_err_msg()
  RDMA/irdma: fix error message in irdma_modify_qp_roce()
  RDMA/cxgb4: Added NULL check for lookup_atid
  RDMA/hns: Fix ah error counter in sw stat not increasing
  RDMA/bnxt_re: Recover the device when FW error is detected
  RDMA/bnxt_re: Group all operations under add_device and remove_device
  RDMA/bnxt_re: Use the aux device for L2 ULP callbacks
  RDMA/bnxt_re: Change aux driver data to en_info to hold more information
  RDMA/nldev: Expose whether RDMA monitoring is supported
  RDMA/nldev: Add support for RDMA monitoring
  RDMA/mlx5: Use IB set_netdev and get_netdev functions
  RDMA/device: Remove optimization in ib_device_get_netdev()
  RDMA/mlx5: Initialize phys_port_cnt earlier in RDMA device creation
  RDMA/mlx5: Obtain upper net device only when needed
  RDMA/mlx5: Check RoCE LAG status before getting netdev
  RDMA/mlx5: Consider the query_vuid cap for data_direct
  net/mlx5: Handle memory scheme ODP capabilities
  RDMA/mlx5: Add implicit MR handling to ODP memory scheme
  RDMA/mlx5: Add handling for memory scheme page fault events
  ...