While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.

While touching all these arrays, unify usage of whitespace in the list
terminator.

This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.

Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260518133311.644160-2-u.kleine-koenig@baylibre.com
Signed-off-by: David Heidelberg <david@ixit.cz>

The I2C read operation in the IRQ thread may return -ENXIO
when the controller has not yet provided data after asserting IRQ.

IRQ assertion does not guarantee that data is immediately
available on the I2C bus. In such cases, the read request may
be NACKed, resulting in -ENXIO.

Treat this condition as "no data available yet" and log it at
debug level instead of reporting it as a read failure.

This avoids misleading error messages during normal operation.

Signed-off-by: Carl Lee <carl.lee@amd.com>
Link: https://patch.msgid.link/20260526-nfc-nxp-nci-treat-enxio-as-no-data-available-yet-v1-1-305bb11b9147@amd.com
Signed-off-by: David Heidelberg <david@ixit.cz>

NXP NCI controllers such as PN7150 support ISO15693 Type 5
tags, but the driver does not currently advertise this protocol.

Add NFC_PROTO_ISO15693_MASK so that ISO15693 tags can be
detected through the Linux NFC stack.

Signed-off-by: Carl Lee <carl.lee@amd.com>
Link: https://patch.msgid.link/20260512-nfc-nxp-nci-add-iso15693-support-v1-1-3394e5b9dba9@amd.com
Signed-off-by: David Heidelberg <david@ixit.cz>

Some ACPI-based platforms report incorrect IRQ trigger types (e.g.
IRQF_TRIGGER_HIGH), which can lead to interrupt storms.

Use the historically working rising-edge trigger on ACPI systems to
avoid this regression.

Device Tree-based systems continue to use the firmware-provided
trigger type.

Fixes: 57be33f85e36 ("nfc: nxp-nci: remove interrupt trigger type")
Signed-off-by: Carl Lee <carl.lee@amd.com>
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Luca Stefani <luca.stefani.ge1@gmail.com>
Link: https://patch.msgid.link/20260516-nfc-nxp-nci-i2c-restore-irq-trigger-fallback-v3-1-37ba4b6e9086@amd.com
Signed-off-by: David Heidelberg <david@ixit.cz>

Cross-merge networking fixes after downstream PR (net-7.0-rc5).

net/netfilter/nft_set_rbtree.c
  598adea720b97 ("netfilter: revert nft_set_rbtree: validate open interval overlap")
  3aea466a43998 ("netfilter: nft_set_rbtree: don't disable bh when acquiring tree lock")
https://lore.kernel.org/abgaQBpeGstdN4oq@sirena.org.uk

No adjacent changes.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Allow the firmware and enable GPIOs to sleep.

This fixes a `WARN_ON' and allows the driver to operate GPIOs which are
connected to I2C GPIO expanders.

-- >8 --
kernel: WARNING: CPU: 3 PID: 2636 at drivers/gpio/gpiolib.c:3880 gpiod_set_value+0x88/0x98
-- >8 --

Fixes: 43201767b44c ("NFC: nxp-nci: Convert to use GPIO descriptor")
Cc: stable@vger.kernel.org
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Link: https://patch.msgid.link/20260317085337.146545-1-ian.ray@gehealthcare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Replace strcpy() with strscpy() which limits the copy to the size of
the destination buffer. Since fw_info->name is an array, the
two-argument variant of strscpy() is used - the compiler deduces
the buffer size automatically.

This is a defensive cleanup replacing the deprecated strcpy()
with the preferred strscpy().

Signed-off-by: Tomasz Unger <tomasz.unger@yahoo.pl>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260301135633.214497-1-tomasz.unger@yahoo.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

For NXP NCI devices (e.g. PN7150), the interrupt is level-triggered and
active high, not edge-triggered.

Using IRQF_TRIGGER_RISING in the driver can cause interrupts to fail
to trigger correctly.

Remove IRQF_TRIGGER_RISING and rely on the IRQ trigger type configured
via Device Tree.

Signed-off-by: Carl Lee <carl.lee@amd.com>
Link: https://patch.msgid.link/20260205-fc-nxp-nci-remove-interrupt-trigger-type-v2-1-79d2ed4a7e42@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.

auto-generated by the following:

for i in `git grep -l -w asm/unaligned.h`; do
	sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
	sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.

This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240619195631.2545407-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>