linux-toradex.git/drivers/nvme/target, branch v5.14

nvme-tcp: can't set sk_user_data without write_lock

2021-07-05T08:14:44+00:00

The sk_user_data pointer is supposed to be modified only while
holding the write_lock "sk_callback_lock", otherwise
we could race with other threads and crash the kernel.

we can't take the write_lock in nvmet_tcp_state_change()
because it would cause a deadlock, but the release_work queue
will set the pointer to NULL later so we can simply remove
the assignment.

Fixes: b5332a9f3f3d ("nvmet-tcp: fix incorrect locking in state_change sk callback")

Signed-off-by: Maurizio Lombardi 
Reviewed-by: Sagi Grimberg 
Signed-off-by: Christoph Hellwig

nvme: use return value from blk_execute_rq()

2021-06-30T21:35:45+00:00

We don't have an nvme status to report if the driver's .queue_rq()
returns an error without dispatching the requested nvme command. Check
the return value from blk_execute_rq() for all passthrough commands so
the caller may know their command was not successful.

If the command is from the target passthrough interface and fails to
dispatch, synthesize the response back to the host as a internal target
error.

Signed-off-by: Keith Busch 
Reviewed-by: Christoph Hellwig 
Reviewed-by: Chaitanya Kulkarni 
Link: https://lore.kernel.org/r/20210610214437.641245-5-kbusch@kernel.org
Signed-off-by: Jens Axboe

nvme: use blk_execute_rq() for passthrough commands

2021-06-30T21:35:38+00:00

The generic blk_execute_rq() knows how to handle polled completions. Use
that instead of implementing an nvme specific handler.

Signed-off-by: Keith Busch 
Reviewed-by: Christoph Hellwig 
Reviewed-by: Chaitanya Kulkarni 
Link: https://lore.kernel.org/r/20210610214437.641245-3-kbusch@kernel.org
Signed-off-by: Jens Axboe

Merge tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block

2021-06-30T19:21:16+00:00

Pull block driver updates from Jens Axboe:
 "Pretty calm round, mostly just NVMe and a bit of MD:

   - NVMe updates (via Christoph)
        - improve the APST configuration algorithm (Alexey Bogoslavsky)
        - look for StorageD3Enable on companion ACPI device
          (Mario Limonciello)
        - allow selecting the network interface for TCP connections
          (Martin Belanger)
        - misc cleanups (Amit Engel, Chaitanya Kulkarni, Colin Ian King,
          Christoph)
        - move the ACPI StorageD3 code to drivers/acpi/ and add quirks
          for certain AMD CPUs (Mario Limonciello)
        - zoned device support for nvmet (Chaitanya Kulkarni)
        - fix the rules for changing the serial number in nvmet
          (Noam Gottlieb)
        - various small fixes and cleanups (Dan Carpenter, JK Kim,
          Chaitanya Kulkarni, Hannes Reinecke, Wesley Sheng, Geert
          Uytterhoeven, Daniel Wagner)

   - MD updates (Via Song)
        - iostats rewrite (Guoqing Jiang)
        - raid5 lock contention optimization (Gal Ofri)

   - Fall through warning fix (Gustavo)

   - Misc fixes (Gustavo, Jiapeng)"

* tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block: (78 commits)
  nvmet: use NVMET_MAX_NAMESPACES to set nn value
  loop: Fix missing discard support when using LOOP_CONFIGURE
  nvme.h: add missing nvme_lba_range_type endianness annotations
  nvme: remove zeroout memset call for struct
  nvme-pci: remove zeroout memset call for struct
  nvmet: remove zeroout memset call for struct
  nvmet: add ZBD over ZNS backend support
  nvmet: add Command Set Identifier support
  nvmet: add nvmet_req_bio put helper for backends
  nvmet: add req cns error complete helper
  block: export blk_next_bio()
  nvmet: remove local variable
  nvmet: use nvme status value directly
  nvmet: use u32 type for the local variable nsid
  nvmet: use u32 for nvmet_subsys max_nsid
  nvmet: use req->cmd directly in file-ns fast path
  nvmet: use req->cmd directly in bdev-ns fast path
  nvmet: make ver stable once connection established
  nvmet: allow mn change if subsys not discovered
  nvmet: make sn stable once connection was established
  ...

nvmet: use NVMET_MAX_NAMESPACES to set nn value

2021-06-21T06:34:10+00:00

For Spec regarding MNAN value:-

If the controller supports Asymmetric Namespace Access Reporting, then
this field shall be set to a non-zero value that is less than or equal
to the NN value.

Instead of using subsys->max_nsid that gets calculated dynamically,
use NVMET_MAX_NAMESPACES value to report NN. This way we will maintain
the MNAN value spec compliant with NN.

Without this patch, code results in the following error :-

[337976.409142] nvme nvme1: Invalid MNAN value 1024

Signed-off-by: Chaitanya Kulkarni 
Signed-off-by: Christoph Hellwig

nvmet: remove zeroout memset call for struct

2021-06-17T13:51:21+00:00

Declare and initialize structure variables to zero values so that we can
remove zeroout memset calls in the target/rdma.c.

Signed-off-by: Chaitanya Kulkarni 
Signed-off-by: Christoph Hellwig

nvmet: add ZBD over ZNS backend support

2021-06-17T13:51:21+00:00

NVMe TP 4053 – Zoned Namespaces (ZNS) allows host software to
communicate with a non-volatile memory subsystem using zones for NVMe
protocol-based controllers. NVMeOF already support the ZNS NVMe
Protocol compliant devices on the target in the passthru mode. There
are generic zoned block devices like  Shingled Magnetic Recording (SMR)
HDDs that are not based on the NVMe protocol.

This patch adds ZNS backend support for non-ZNS zoned block devices as
NVMeOF targets.

This support includes implementing the new command set NVME_CSI_ZNS,
adding different command handlers for ZNS command set such as NVMe
Identify Controller, NVMe Identify Namespace, NVMe Zone Append,
NVMe Zone Management Send and NVMe Zone Management Receive.

With the new command set identifier, we also update the target command
effects logs to reflect the ZNS compliant commands.

Signed-off-by: Chaitanya Kulkarni 
Reviewed-by: Damien Le Moal 
Signed-off-by: Christoph Hellwig

nvmet: add Command Set Identifier support

2021-06-17T13:51:20+00:00

NVMe TP 4056 allows controllers to support different command sets.
NVMeoF target currently only supports namespaces that contain
traditional logical blocks that may be randomly read and written. In
some applications there is a value in exposing namespaces that contain
logical blocks that have special access rules (e.g. sequentially write
required namespace such as Zoned Namespace (ZNS)).

In order to support the Zoned Block Devices (ZBD) backend, controllers
need to have support for ZNS Command Set Identifier (CSI).

In this preparation patch, we adjust the code such that it can now
support the default command set identifier. We update the namespace data
structure to store the CSI value which defaults to NVME_CSI_NVM
that represents traditional logical blocks namespace type.

The CSI support is required to implement the ZBD backend for NVMeOF
with host side NVMe ZNS interface, since ZNS commands belong to
the different command set than the default one.

Signed-off-by: Chaitanya Kulkarni 
Signed-off-by: Christoph Hellwig

nvmet: add nvmet_req_bio put helper for backends

2021-06-17T13:51:20+00:00

In current code there exists two backends which are using inline bio
optimization, that adds a duplicate code for freeing the bio.

For Zoned Block Device backend we also use the same optimzation and it
will lead to having duplicate code in the three backends: generic
bdev, passsthru, and generic zns.

Add a helper function to avoid duplicate code and update the respective
backends.

Signed-off-by: Chaitanya Kulkarni 
Reviewed-by: Damien Le Moal 
Signed-off-by: Christoph Hellwig

nvmet: add req cns error complete helper

2021-06-17T13:51:20+00:00

We report error and complete the request when identify cns value is not
handled in nvmet_execute_identify(). This error reporting is also needed
for Zone Block Device backend for NVMeOF target.

Add a helper nvmet_req_cns_error_compplete() to report an error and
complete the request when idenitfy command cns not handled value.

Signed-off-by: Chaitanya Kulkarni 
Reviewed-by: Damien Le Moal 
Signed-off-by: Christoph Hellwig