linux-toradex.git/drivers/of, branch v6.13-rc3

Get rid of 'remove_new' relic from platform driver struct

2024-12-01T23:12:43+00:00

The continual trickle of small conversion patches is grating on me, and
is really not helping.  Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:

  /*
   * .remove_new() is a relic from a prototype conversion of .remove().
   * New drivers are supposed to implement .remove(). Once all drivers are
   * converted to not use .remove_new any more, it will be dropped.
   */

This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.

I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.

Then I just removed the old (sic) .remove_new member function, and this
is the end result.  No more unnecessary conversion noise.

Signed-off-by: Linus Torvalds

Merge tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2024-12-01T21:38:24+00:00

Pull i2c component probing support from Wolfram Sang:
 "Add OF component probing.

  Some devices are designed and manufactured with some components having
  multiple drop-in replacement options. These components are often
  connected to the mainboard via ribbon cables, having the same signals
  and pin assignments across all options. These may include the display
  panel and touchscreen on laptops and tablets, and the trackpad on
  laptops. Sometimes which component option is used in a particular
  device can be detected by some firmware provided identifier, other
  times that information is not available, and the kernel has to try to
  probe each device.

  Instead of a delicate dance between drivers and device tree quirks,
  this change introduces a simple I2C component probe function. For a
  given class of devices on the same I2C bus, it will go through all of
  them, doing a simple I2C read transfer and see which one of them
  responds. It will then enable the device that responds"

* tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  MAINTAINERS: fix typo in I2C OF COMPONENT PROBER
  of: base: Document prefix argument for of_get_next_child_with_prefix()
  i2c: Fix whitespace style issue
  arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
  platform/chrome: Introduce device tree hardware prober
  i2c: of-prober: Add GPIO support to simple helpers
  i2c: of-prober: Add simple helpers for regulator support
  i2c: Introduce OF component probe function
  of: base: Add for_each_child_of_node_with_prefix()
  of: dynamic: Add of_changeset_update_prop_string

Merge tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2024-11-30T21:41:50+00:00

Pull Kbuild updates from Masahiro Yamada:

 - Add generic support for built-in boot DTB files

 - Enable TAB cycling for dialog buttons in nconfig

 - Fix issues in streamline_config.pl

 - Refactor Kconfig

 - Add support for Clang's AutoFDO (Automatic Feedback-Directed
   Optimization)

 - Add support for Clang's Propeller, a profile-guided optimization.

 - Change the working directory to the external module directory for M=
   builds

 - Support building external modules in a separate output directory

 - Enable objtool for *.mod.o and additional kernel objects

 - Use lz4 instead of deprecated lz4c

 - Work around a performance issue with "git describe"

 - Refactor modpost

* tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (85 commits)
  kbuild: rename .tmp_vmlinux.kallsyms0.syms to .tmp_vmlinux0.syms
  gitignore: Don't ignore 'tags' directory
  kbuild: add dependency from vmlinux to resolve_btfids
  modpost: replace tdb_hash() with hash_str()
  kbuild: deb-pkg: add python3:native to build dependency
  genksyms: reduce indentation in export_symbol()
  modpost: improve error messages in device_id_check()
  modpost: rename alias symbol for MODULE_DEVICE_TABLE()
  modpost: rename variables in handle_moddevtable()
  modpost: move strstarts() to modpost.h
  modpost: convert do_usb_table() to a generic handler
  modpost: convert do_of_table() to a generic handler
  modpost: convert do_pnp_device_entry() to a generic handler
  modpost: convert do_pnp_card_entries() to a generic handler
  modpost: call module_alias_printf() from all do_*_entry() functions
  modpost: pass (struct module *) to do_*_entry() functions
  modpost: remove DEF_FIELD_ADDR_VAR() macro
  modpost: deduplicate MODULE_ALIAS() for all drivers
  modpost: introduce module_alias_printf() helper
  modpost: remove unnecessary check in do_acpi_entry()
  ...

of: base: Document prefix argument for of_get_next_child_with_prefix()

2024-11-29T01:48:59+00:00

When of_get_next_child_with_prefix() was added, the prefix argument was
left undocumented. This caused a new warning to be generated during the
kerneldoc build process:

 drivers/of/base.c:661: warning: Function parameter or struct member 'prefix'
 	not described in 'of_get_next_child_with_prefix'

Properly document the argument to fix this.

Reported-by: kernel test robot 
Closes: https://lore.kernel.org/oe-kbuild-all/202411280010.KGSDBOUE-lkp@intel.com/
Fixes: 1fcc67e3a354 ("of: base: Add for_each_child_of_node_with_prefix()")
Signed-off-by: Chen-Yu Tsai 
Signed-off-by: Wolfram Sang

of: base: Add for_each_child_of_node_with_prefix()

2024-11-27T11:04:01+00:00

There are cases where drivers would go through child device nodes and
operate on only the ones whose node name starts with a given prefix.

Provide a helper for these users. This will mainly be used in a
subsequent patch that implements a hardware component prober for I2C
busses.

Signed-off-by: Chen-Yu Tsai 
Reviewed-by: Rob Herring (Arm) 
Reviewed-by: AngeloGioacchino Del Regno 
Signed-off-by: Wolfram Sang

of: dynamic: Add of_changeset_update_prop_string

2024-11-27T11:03:48+00:00

Add a helper function to add string property updates to an OF changeset.
This is similar to of_changeset_add_prop_string(), but instead of adding
the property (and failing if it exists), it will update the property.

This shall be used later in the DT hardware prober.

Signed-off-by: Chen-Yu Tsai 
Reviewed-by: Rob Herring (Arm) 
Reviewed-by: AngeloGioacchino Del Regno 
Signed-off-by: Wolfram Sang

Merge branch 'dt/linus' into dt/next

2024-11-15T20:03:59+00:00

Pull-in kunit kconfig fix

of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n

2024-11-15T20:03:28+00:00

Some configurations want to enable CONFIG_KUNIT without enabling
CONFIG_OF_OVERLAY. The kunit overlay code already skips if
CONFIG_OF_OVERLAY isn't enabled, so this select here isn't really doing
anything besides making it easier to run the tests without them
skipping. Remove the select and move the config setting to the
drivers/of/.kunitconfig file so that the overlay tests can be run with
or without CONFIG_OF_OVERLAY set to test either behavior.

Fixes: 5c9dd72d8385 ("of: Add a KUnit test for overlays and test managed APIs")
Signed-off-by: Stephen Boyd 
Acked-by: Geert Uytterhoeven 
Link: https://lore.kernel.org/r/20241016212016.887552-1-sboyd@kernel.org
Signed-off-by: Rob Herring (Arm)

of/address: Rework bus matching to avoid warnings

2024-11-08T19:41:34+00:00

With warnings added for deprecated #address-cells/#size-cells handling,
the DT address handling code causes warnings when used on nodes with no
address. This happens frequently with calls to of_platform_populate() as
it is perfectly acceptable to have devices without a 'reg' property. The
desired behavior is to just silently return an error when retrieving an
address.

The warnings can be avoided by checking for "#address-cells" presence
first and checking for an address property before fetching
"#address-cells" and "#size-cells".

Reported-by: Marek Szyprowski 
Reported-by: Steven Price 
Tested-by: Marek Szyprowski 
Link: https://lore.kernel.org/r/20241108193547.2647986-2-robh@kernel.org
Signed-off-by: Rob Herring (Arm)

of: WARN on deprecated #address-cells/#size-cells handling

2024-11-08T19:15:54+00:00

While OpenFirmware originally allowed walking parent nodes and default
root values for #address-cells and #size-cells, FDT has long required
explicit values. It's been a warning in dtc for the root node since the
beginning (2005) and for any parent node since 2007. Of course, not all
FDT uses dtc, but that should be the majority by far. The various
extracted OF devicetrees I have dating back to the 1990s (various
PowerMac, OLPC, PASemi Nemo) all have explicit root node properties. The
warning is disabled for Sparc as there are known systems relying on
default root node values.

Link: https://lore.kernel.org/r/20241106171028.3830266-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm)