linux-toradex.git/drivers/parisc/lba_pci.c, branch v3.12.34

PCI: Delay enabling bridges until they're needed

2013-07-25T18:35:03+00:00

We currently enable PCI bridges after scanning a bus and assigning
resources.  This is often done in arch code.

This patch changes this so we don't enable a bridge until necessary, i.e.,
until we enable a PCI device behind the bridge.  We do this in the generic
pci_enable_device() path, so this also removes the arch-specific code to
enable bridges.

[bhelgaas: changelog]
Signed-off-by: Yinghai Lu 
Signed-off-by: Bjorn Helgaas

parisc: fix LMMIO mismatch between PAT length and MASK register

2013-07-09T20:09:16+00:00

The LMMIO length reported by PAT and the length given by the LBA MASK
register are not consistent. This leads e.g. to a not-working ATI FireGL
card with the radeon DRM driver since the memory can't be mapped.

Fix this by correctly adjusting the resource sizes.

Signed-off-by: Helge Deller 
Cc:  # 3.10

parisc/PCI: lba: fix: convert to pci_create_root_bus() for correct root bus resources (v2)

2013-06-01T12:44:25+00:00

commit dc7dce280a
Author: Bjorn Helgaas 
Date:   Fri Oct 28 16:27:27 2011 -0600
   parisc/PCI: lba: convert to pci_create_root_bus() for correct root bus
                    resources

  Supply root bus resources to pci_create_root_bus() so they're correct
  immediately.  This fixes the problem of "early" and "header" quirks seeing
  incorrect root bus resources.

added tests for elmmio_space.start while it should use
elmmio_space.flags.  This for example led to incorrect resource
assignments and a non-working stifb framebuffer on most parisc machines.

LBA 10:1: PCI host bridge to bus 0000:01
pci_bus 0000:01: root bus resource [io  0x12000-0x13fff] (bus address [0x2000-0x3fff])
pci_bus 0000:01: root bus resource [mem 0xfffffffffa000000-0xfffffffffbffffff] (bus address [0xfa000000-0xfbffffff])
pci_bus 0000:01: root bus resource [mem 0xfffffffff4800000-0xfffffffff4ffffff] (bus address [0xf4800000-0xf4ffffff])
pci_bus 0000:01: root bus resource [??? 0x00000001 flags 0x0]

Signed-off-by: Helge Deller 
Acked-by: Bjorn Helgaas

parisc/PCI: Set type for LBA bus_num resource

2013-06-01T12:43:02+00:00

The non-PAT resource probing code failed to set the type of the LBA bus_num
resource (30aa80da43 "parisc/PCI: register busn_res for root buses" did
the corresponding thing for the PAT case).

This causes incorrect resource assignments and a non-working stifb
framebuffer on most parisc machines.

Signed-off-by: Bjorn Helgaas 
Signed-off-by: Helge Deller

Drivers: misc: remove __dev* attributes.

2013-01-03T23:57:16+00:00

CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton 
Signed-off-by: Greg Kroah-Hartman

parisc/PCI: Use list_for_each_entry() for bus->devices traversal

2012-08-22T17:34:38+00:00

Replace list_for_each() + pci_dev_b() with the simpler
list_for_each_entry().

Signed-off-by: Bjorn Helgaas 
Acked-by: Yinghai Lu 
CC: linux-parisc@vger.kernel.org

parisc/PCI: Enable PERR/SERR on all devices

2012-08-22T17:34:38+00:00

Previously, we enabled PERR & SERR for the first device on the bus, but
left other devices alone.

Signed-off-by: Bjorn Helgaas 
Acked-by: Yinghai Lu 
CC: linux-parisc@vger.kernel.org

parisc/PCI: register busn_res for root buses

2012-06-13T21:42:24+00:00

Add the host bridge bus number aperture to the resource list.
Like the MMIO and I/O port apertures, this is used when assigning
resources to hot-added devices or in the case of conflicts.

[bhelgaas: changelog, set flags directly, at LBA bus_num init]
CC: Kyle McMartin 
CC: Helge Deller 
CC: linux-parisc@vger.kernel.org
Signed-off-by: Yinghai Lu 
Signed-off-by: Bjorn Helgaas

PCI: replace struct pci_bus secondary/subordinate with busn_res

2012-06-13T21:42:22+00:00

Replace the struct pci_bus secondary/subordinate members with the
struct resource busn_res.  Later we'll build a resource tree of these
bus numbers.

[bhelgaas: changelog]
Signed-off-by: Yinghai Lu 
Signed-off-by: Bjorn Helgaas

Merge tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system

2012-03-28T22:58:21+00:00

Pull "Disintegrate and delete asm/system.h" from David Howells:
 "Here are a bunch of patches to disintegrate asm/system.h into a set of
  separate bits to relieve the problem of circular inclusion
  dependencies.

  I've built all the working defconfigs from all the arches that I can
  and made sure that they don't break.

  The reason for these patches is that I recently encountered a circular
  dependency problem that came about when I produced some patches to
  optimise get_order() by rewriting it to use ilog2().

  This uses bitops - and on the SH arch asm/bitops.h drags in
  asm-generic/get_order.h by a circuituous route involving asm/system.h.

  The main difficulty seems to be asm/system.h.  It holds a number of
  low level bits with no/few dependencies that are commonly used (eg.
  memory barriers) and a number of bits with more dependencies that
  aren't used in many places (eg.  switch_to()).

  These patches break asm/system.h up into the following core pieces:

    (1) asm/barrier.h

        Move memory barriers here.  This already done for MIPS and Alpha.

    (2) asm/switch_to.h

        Move switch_to() and related stuff here.

    (3) asm/exec.h

        Move arch_align_stack() here.  Other process execution related bits
        could perhaps go here from asm/processor.h.

    (4) asm/cmpxchg.h

        Move xchg() and cmpxchg() here as they're full word atomic ops and
        frequently used by atomic_xchg() and atomic_cmpxchg().

    (5) asm/bug.h

        Move die() and related bits.

    (6) asm/auxvec.h

        Move AT_VECTOR_SIZE_ARCH here.

  Other arch headers are created as needed on a per-arch basis."

Fixed up some conflicts from other header file cleanups and moving code
around that has happened in the meantime, so David's testing is somewhat
weakened by that.  We'll find out anything that got broken and fix it..

* tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits)
  Delete all instances of asm/system.h
  Remove all #inclusions of asm/system.h
  Add #includes needed to permit the removal of asm/system.h
  Move all declarations of free_initmem() to linux/mm.h
  Disintegrate asm/system.h for OpenRISC
  Split arch_align_stack() out from asm-generic/system.h
  Split the switch_to() wrapper out of asm-generic/system.h
  Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h
  Create asm-generic/barrier.h
  Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h
  Disintegrate asm/system.h for Xtensa
  Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt]
  Disintegrate asm/system.h for Tile
  Disintegrate asm/system.h for Sparc
  Disintegrate asm/system.h for SH
  Disintegrate asm/system.h for Score
  Disintegrate asm/system.h for S390
  Disintegrate asm/system.h for PowerPC
  Disintegrate asm/system.h for PA-RISC
  Disintegrate asm/system.h for MN10300
  ...