linux-toradex.git/drivers/pci/Kconfig, branch v4.0.7

x86, irq: Make MSI and HT_IRQ indepenent of X86_IO_APIC

2014-12-16T13:08:17+00:00

Now we have splitted functions to support MSI and HT_IRQ into vector.c,
and they have no dependency on IOAPIC any more. So change Kconfig files
to make MSI and HT_IRQ independent of X86_IO_APIC.

Signed-off-by: Jiang Liu 
Cc: Konrad Rzeszutek Wilk 
Cc: Tony Luck 
Cc: Joerg Roedel 
Cc: Greg Kroah-Hartman 
Cc: Benjamin Herrenschmidt 
Cc: Rafael J. Wysocki 
Cc: Bjorn Helgaas 
Cc: Randy Dunlap 
Cc: Yinghai Lu 
Cc: Borislav Petkov 
Link: http://lkml.kernel.org/r/1414397531-28254-16-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner

PCI: Remove PCI ioapic driver

2014-12-16T13:08:14+00:00

To support IOAPIC hotplug on x86 and IA64 platforms, OS needs to figure
out global interrupt source number(GSI) and IOAPIC enumeration ID
through ACPI interfaces. So BIOS must implement an ACPI IOAPIC device
with _GSB/_UID or _MAT method to support IOAPIC hotplug. OS also needs
to figure out base physical address to access IOAPIC registers. OS may
get the base physical address through PCI BARs if IOAPIC device is
visible in PCI domain, otherwise OS may get the address by ACPI _CRS
method if IOAPIC device is hidden from PCI domain by BIOS.

When adding a PCI subtree, we need to add IOAPIC devices before enabling
all other PCI devices because other PCI devices may use the IOAPIC to
allocate PCI interrupts.

So we plan to reimplement IOAPIC driver as an ACPI instead of PCI driver
due to:
1) hot-pluggable IOAPIC devices are always visible in ACPI domain,
   but may or may not be visible in PCI domain.
2) we could explicitly control the order between IOAPIC and other PCI
   devices.

We also have another choice to use a PCI driver to manage IOAPIC device
if it's visible in PCI domain and use an ACPI driver if it's only
visible in ACPI domain. But this solution is a little complex.

It shouldn't cause serious backward compatibility issues because:
1) IOAPIC hotplug is never supported on x86 yet because it hasn't
   implemented the required acpi_register_ioapic() and
   acpi_unregister_ioapic().
2) Currently only ACPI based IOAPIC hotplug is possible on x86 and
   IA64, we don't know other specifications and interfaces to support
   IOAPIC hotplug yet.
3) We will reimplement an ACPI IOAPIC driver to support IOAPIC hotplug.

This change also helps to get rid of the false alarm on all current
Linux distributions:
[    6.952497] ioapic: probe of 0000:00:05.4 failed with error -22
[    6.959542] ioapic: probe of 0000:80:05.4 failed with error -22

Signed-off-by: Jiang Liu 
Cc: Konrad Rzeszutek Wilk 
Cc: Tony Luck 
Cc: Joerg Roedel 
Cc: Greg Kroah-Hartman 
Cc: Benjamin Herrenschmidt 
Cc: Rafael J. Wysocki 
Cc: Bjorn Helgaas 
Cc: Randy Dunlap 
Cc: Yinghai Lu 
Cc: Borislav Petkov 
Link: http://lkml.kernel.org/r/1414387308-27148-9-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner

PCI/MSI: Enhance core to support hierarchy irqdomain

2014-11-23T12:01:47+00:00

Enhance PCI MSI core to support hierarchy irqdomain, so the common
code can be shared across architectures.

[ tglx: Extracted and combined from several patches ]

Signed-off-by: Jiang Liu 
Cc: Bjorn Helgaas 
Cc: Grant Likely 
Cc: Marc Zyngier 
Cc: Yingjoe Chen 
Cc: Yijing Wang 
Signed-off-by: Thomas Gleixner

PCI/MSI: Move cached entry functions to irq core

2014-11-23T12:01:47+00:00

Required to support non PCI based MSI.

[ tglx: Extracted from Jiangs patch series ]

Signed-off-by: Jiang Liu 
Signed-off-by: Thomas Gleixner

PCI: Convert ioapic to be builtin only, not modular

2014-01-03T21:31:38+00:00

Convert pci/ioapic.c to be builtin only, with no module option, so we can
support IO-APIC hotplug.  Also make it depend on X86_IO_APIC.

[bhelgaas: changelog]
Signed-off-by: Yinghai Lu 
Signed-off-by: Bjorn Helgaas

PCI: remove ARCH_SUPPORTS_MSI kconfig option

2013-08-12T15:26:48+00:00

Now that we have weak versions for each of the PCI MSI architecture
functions, we can actually build the MSI support for all platforms,
regardless of whether they provide or not architecture-specific
versions of those functions. For this reason, the ARCH_SUPPORTS_MSI
hidden kconfig boolean becomes useless, and this patch gets rid of it.

Signed-off-by: Thomas Petazzoni 
Acked-by: Bjorn Helgaas 
Acked-by: Benjamin Herrenschmidt 
Tested-by: Daniel Price 
Tested-by: Thierry Reding 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Martin Schwidefsky 
Cc: Heiko Carstens 
Cc: linux390@de.ibm.com
Cc: linux-s390@vger.kernel.org
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: H. Peter Anvin 
Cc: x86@kernel.org
Cc: Russell King 
Cc: Tony Luck 
Cc: Fenghua Yu 
Cc: linux-ia64@vger.kernel.org
Cc: Ralf Baechle 
Cc: linux-mips@linux-mips.org
Cc: David S. Miller 
Cc: sparclinux@vger.kernel.org
Cc: Chris Metcalf 
Signed-off-by: Jason Cooper

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2013-07-02T20:43:38+00:00

Pull ARM SoC specific changes from Arnd Bergmann:
 "These changes are all to SoC-specific code, a total of 33 branches on
  17 platforms were pulled into this.  Like last time, Renesas sh-mobile
  is now the platform with the most changes, followed by OMAP and
  EXYNOS.

  Two new platforms, TI Keystone and Rockchips RK3xxx are added in this
  branch, both containing almost no platform specific code at all, since
  they are using generic subsystem interfaces for clocks, pinctrl,
  interrupts etc.  The device drivers are getting merged through the
  respective subsystem maintainer trees.

  One more SoC (u300) is now multiplatform capable and several others
  (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving
  towards that goal with this series but need more work.

  Also noteworthy is the work on PCI here, which is traditionally part
  of the SoC specific code.  With the changes done by Thomas Petazzoni,
  we can now more easily have PCI host controller drivers as loadable
  modules and keep them separate from the platform code in
  drivers/pci/host.  This has already led to the discovery that three
  platforms (exynos, spear and imx) are actually using an identical PCIe
  host controller and will be able to share a driver once support for
  spear and imx is added."

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits)
  ARM: integrator: let pciv3 use mem/premem from device tree
  ARM: integrator: set local side PCI addresses right
  ARM: dts: Add pcie controller node for exynos5440-ssdk5440
  ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC
  ARM: EXYNOS: Enable PCIe support for Exynos5440
  pci: Add PCIe driver for Samsung Exynos
  ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data
  ARM: keystone: Move CPU bringup code to dedicated asm file
  ARM: multiplatform: always pick one CPU type
  ARM: imx: select syscon for IMX6SL
  ARM: keystone: select ARM_ERRATA_798181 only for SMP
  ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1
  ARM: OMAP2+: AM43x: resolve SMP related build error
  dmaengine: edma: enable build for AM33XX
  ARM: edma: Add EDMA crossbar event mux support
  ARM: edma: Add DT and runtime PM support to the private EDMA API
  dmaengine: edma: Add TI EDMA device tree binding
  arm: add basic support for Rockchip RK3066a boards
  arm: add debug uarts for rockchip rk29xx and rk3xxx series
  arm: Add basic clocks for Rockchip rk3066a SoCs
  ...

Finally eradicate CONFIG_HOTPLUG

2013-06-03T21:20:18+00:00

Ever since commit 45f035ab9b8f ("CONFIG_HOTPLUG should be always on"),
it has been basically impossible to build a kernel with CONFIG_HOTPLUG
turned off.  Remove all the remaining references to it.

Cc: Russell King 
Cc: Doug Thompson 
Cc: Bjorn Helgaas 
Cc: Steven Whitehouse 
Cc: Arnd Bergmann 
Cc: Pavel Machek 
Cc: "Rafael J. Wysocki" 
Cc: Andrew Morton 
Signed-off-by: Stephen Rothwell 
Acked-by: Mauro Carvalho Chehab 
Acked-by: Hans Verkuil 
Signed-off-by: Greg Kroah-Hartman

pci: PCIe driver for Marvell Armada 370/XP systems

2013-05-20T19:18:44+00:00

This driver implements the support for the PCIe interfaces on the
Marvell Armada 370/XP ARM SoCs. In the future, it might be extended to
cover earlier families of Marvell SoCs, such as Dove, Orion and
Kirkwood.

The driver implements the hw_pci operations needed by the core ARM PCI
code to setup PCI devices and get their corresponding IRQs, and the
pci_ops operations that are used by the PCI core to read/write the
configuration space of PCI devices.

Since the PCIe interfaces of Marvell SoCs are completely separate and
not linked together in a bus, this driver sets up an emulated PCI host
bridge, with one PCI-to-PCI bridge as child for each hardware PCIe
interface.

In addition, this driver enumerates the different PCIe slots, and for
those having a device plugged in, it sets up the necessary address
decoding windows, using the mvebu-mbus driver.

Signed-off-by: Thomas Petazzoni 
Acked-by: Bjorn Helgaas 
Signed-off-by: Jason Cooper

PCI: Drop bogus default from ARCH_SUPPORTS_MSI

2012-09-10T22:49:52+00:00

Options without prompts and without dependencies don't usefully have a
default value - they're intended to be selected from other options
only.

Signed-off-by: Jan Beulich 
Signed-off-by: Bjorn Helgaas