This driver implements the support for the PCIe interfaces on the
Marvell Armada 370/XP ARM SoCs. In the future, it might be extended to
cover earlier families of Marvell SoCs, such as Dove, Orion and
Kirkwood.

The driver implements the hw_pci operations needed by the core ARM PCI
code to setup PCI devices and get their corresponding IRQs, and the
pci_ops operations that are used by the PCI core to read/write the
configuration space of PCI devices.

Since the PCIe interfaces of Marvell SoCs are completely separate and
not linked together in a bus, this driver sets up an emulated PCI host
bridge, with one PCI-to-PCI bridge as child for each hardware PCIe
interface.

In addition, this driver enumerates the different PCIe slots, and for
those having a device plugged in, it sets up the necessary address
decoding windows, using the mvebu-mbus driver.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

CONFIG_HOTPLUG is being removed so setup-bus always needs to be built
as part of PCI.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

With the demise of CONFIG_HOTPLUG as an option, the pci_uevent
function located in hotplug.c will now always be used and doesn't need
special treatment in the Makefile.  Move pci_uevent into pci-driver.c
and remove hotplug.c

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ColdFire M54xx family of CPU cores (supported by the m68k arch code)
have PCI bus hardware. We want to be able to use this and will need the
setup-bus.c and setup-irq.c helper functions. So when CONFIG_M68K is
enabled add them to the objs build list.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Pull PCI changes from Bjorn Helgaas:
 - Host bridge cleanups from Yinghai
 - Disable Bus Master bit on PCI device shutdown (kexec-related)
 - Stratus ftServer fix
 - pci_dev_reset() locking fix
 - IvyBridge graphics erratum workaround

* tag 'pci-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (21 commits)
  microblaze/PCI: fix "io_offset undeclared" error
  x86/PCI: only check for spinlock being held in SMP kernels
  resources: add resource_overlaps()
  PCI: fix uninitialized variable 'cap_mask'
  MAINTAINERS: update PCI git tree and patchwork
  PCI: disable Bus Master on PCI device shutdown
  PCI: work around IvyBridge internal graphics FLR erratum
  x86/PCI: fix unused variable warning in amd_bus.c
  PCI: move mutex locking out of pci_dev_reset function
  PCI: work around Stratus ftServer broken PCIe hierarchy
  x86/PCI: merge pcibios_scan_root() and pci_scan_bus_on_node()
  x86/PCI: dynamically allocate pci_root_info for native host bridge drivers
  x86/PCI: embed pci_sysdata into pci_root_info on ACPI path
  x86/PCI: embed name into pci_root_info struct
  x86/PCI: add host bridge resource release for _CRS path
  x86/PCI: refactor get_current_resources()
  PCI: add host bridge release support
  PCI: add generic device into pci_host_bridge struct
  PCI: rename pci_host_bridge() to find_pci_root_bridge()
  x86/PCI: fix memleak with get_current_resources()
  ...

Move host bridge-related code from probe.c to a new host-bridge.c.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Otherwise we get this link failure for frv's defconfig:

   LD      .tmp_vmlinux1
 drivers/built-in.o: In function `pci_assign_resource':
 (.text+0xbf0c): undefined reference to `pci_cardbus_resource_alignment'
 drivers/built-in.o: In function `pci_setup':
 pci.c:(.init.text+0x174): undefined reference to `pci_realloc_get_opt'
 pci.c:(.init.text+0x1a0): undefined reference to `pci_realloc_get_opt'
 make[1]: *** [.tmp_vmlinux1] Error 1

Cc: David Howells <dhowells@redhat.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

ATS does not depend on IOV support, so move the code into
its own file. This file will also include support for the
PRI and PASID capabilities later.
Also give ATS its own Kconfig variable to allow selecting it
without IOV support.

Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

* 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  iommu/core: Fix build with INTR_REMAP=y && CONFIG_DMAR=n
  iommu/amd: Don't use MSI address range for DMA addresses
  iommu/amd: Move missing parts to drivers/iommu
  iommu: Move iommu Kconfig entries to submenu
  x86/ia64: intel-iommu: move to drivers/iommu/
  x86: amd_iommu: move to drivers/iommu/
  msm: iommu: move to drivers/iommu/
  drivers: iommu: move to a dedicated folder
  x86/amd-iommu: Store device alias as dev_data pointer
  x86/amd-iommu: Search for existind dev_data before allocting a new one
  x86/amd-iommu: Allow dev_data->alias to be NULL
  x86/amd-iommu: Use only dev_data in low-level domain attach/detach functions
  x86/amd-iommu: Use only dev_data for dte and iotlb flushing routines
  x86/amd-iommu: Store ATS state in dev_data
  x86/amd-iommu: Store devid in dev_data
  x86/amd-iommu: Introduce global dev_data_list
  x86/amd-iommu: Remove redundant device_flush_dte() calls
  iommu-api: Add missing header file

Fix up trivial conflicts (independent additions close to each other) in
drivers/Makefile and include/linux/pci.h

* 'of-pci' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  pci/of: Consolidate pci_bus_to_OF_node()
  pci/of: Consolidate pci_device_to_OF_node()
  x86/devicetree: Use generic PCI <-> OF matching
  microblaze/pci: Move the remains of pci_32.c to pci-common.c
  microblaze/pci: Remove powermac originated cruft
  pci/of: Match PCI devices to OF nodes dynamically