Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Set supported_speeds in set_pcie_port_type() so sparc64 and
powerpc, which call it via of_create_pci_dev() instead of the usual
pci_setup_device(), correctly set the supported PCIe link speeds
(Stian Halseth)
- When pcie_set_mps() changes MPS, update the value in the saved
state so a subsequent restore doesn't restore an invalid value
(Niklas Cassel)
- Skip Target Speed quirk on clamped ports with no link (Maciej W.
Rozycki)
Driver binding:
- Assume control of portdrv-related features only when portdrv is
enabled, since we can't use them without portdrv (Kuppuswamy
Sathyanarayanan)
- Centralize feature ownership checking so code only needs to check
'host->native_X' and doesn't need to also check 'pcie_ports_native'
(Kuppuswamy Sathyanarayanan)
Error handling:
- Fix leaks when ACPI APEI/GHES error events overflow the kfifo or
mention a device that no longer exists (Priyank Rathod)
- Fix aer_process_err_devices() leak when a device is recorded as an
error source purely by being mentioned in the Root Port Error
Source and the device is inaccessible or logged only masked errors
(Priyank Rathod)
ASPM:
- Disable ASPM when drivers request that, even if the OS doesn't own
ASPM; otherwise drivers do it on their own, which is worse (Ilpo
Järvinen)
Power management:
- Align hibernate poweroff flow with suspend flow for bridges so they
can be powered down at hibernate as they are for suspend (Mario
Limonciello)
- Restore BARs after powering up during enumeration to fix a
regression on devices that don't preserve state in D3hot (Keng-Yu
Lin)
- Avoid D3 on PLX PEX 8532/8533/8548 downstream ports, where putting
them in D3hot takes down the whole switch (Imre Kaloz)
Power control:
- Add GPIO driver for Toshiba TC9563 embedded GPIO controller (Alex
Elder)
- Add DT documentation and pwrctrl driver support for TC9563 embedded
GPIO controller (Lorenzo Bianconi)
- Switch the tc9563 per-port reset to use the GPIO descriptor API
instead of direct regmap accesses (Lorenzo Bianconi)
- Only destroy devices created by pwrctrl core, so that when removing
a PCIe controller driver that uses pwrctrl, we don't remove devices
populated by another mechanism (Shawn Lin)
- Power off child devices on power-on failure (Lorenzo Bianconi)
PCIe native device hotplug:
- Make the 'pciehp_poll_mode' parameter read-only to prevent changes
via sysfs, which can cause errors when unbinding (Runyu Xiao)
Virtualization:
- Read SR-IOV VF Revision ID and Subsystem ID from VF instead of
assuming they're the same as VF 0; they may differ (Logan Odell)
- Add ACS quirk for Pericom PI7C9X2G304 switches (Hans de Goede)
Peer-to-peer DMA:
- Add Zhaoxin KX-6000, KH-40000, KX-6000G, KX-7000, and KH-50000 host
bridges to allowlist (LeoLiu-oc)
- Add Alibaba T-HEAD Yitian 710 host bridge to allowlist (Feng Tang)
- Add Intel Haswell client host bridge to allowlist (Scott Lee)
- Intel Xeon E3/E5/E7 0x6f00 host bridge to allowlist (kai zhang)
- Fix handling of errors in pci_p2pdma_add_resource() to avoid (a)
unmapping a BAR if registering another fails and (b) use after free
of p2p_pgmap (Leon Romanovsky)
- Wait for RCU readers before freeing state to avoid use-after-free
of pdev->p2pdma (Leon Romanovsky)
- Restrict pci_p2pmem_find_many() to providers backed by a pool (Leon
Romanovsky)
- Safely terminate ACS redirect lists to avoid out-of-bounds access
to the buffer (Leon Romanovsky)
- Silence 'Host bridge not in P2PDMA whitelist' warnings unless
caller, e.g., pci_p2pmem_find_many(), requests 'verbose' (Leon
Romanovsky)
Sysfs:
- Return -ENODEV or -EIO sysfs 'label' or 'acpi_index' attributes
when Device Name _DSM fails, not -1, which is interpreted as -EPERM
(Krzysztof Wilczyński)
- Return valid sysfs 'acpi_index' attribute even if the Device Name
_DSM returned an invalid 'label' (Krzysztof Wilczyński)
- Expose sysfs 'acpi_index' and 'label' based on whether the Device
Name _DSM returns valid data, not merely whether the _DSM is
implemented (Krzysztof Wilczyński)
- Avoid out-of-bounds reads of the label returned by the Device Name
_DSM, which is in UTF-16 characters, not bytes (Krzysztof
Wilczyński)
- Reject unaligned resource I/O port accesses, which can oops on
arm64 (Deepanshu Kartikey)
Endpoint framework:
- Pass the correct physical and virtual endpoint function numbers
when setting translation of inbound memory windows (Koichiro Den)
- Make embedded doorbell IRQ non-shared, since currently only the
first EPF can allocate doorbells (Koichiro Den)
- MSI doorbells currently target the first EPF attached to an EPC;
let other EPFs try the embedded doorbell instead of failing when
they can't use the MSI doorbell (Koichiro Den)
- Serialize scan of vNTB virtual PCI bus with other PCI topology
changes (Koichiro Den)
- Manage vNTB lifetimes to avoid leaking virtual devices and buses
and allow removal (Koichiro Den)
- Track vNTB link state from both sides so both see the same
effective link state (Koichiro Den)
- Configure vNTB MSI-X when supported to avoid IOMMU faults and
failure to deliver doorbell interrupts on RC (Koichiro Den)
APM X-Gene PCIe controller driver:
- Use devm for clocks so they're automatically disabled, unprepared,
and released if errors happen during probe (Yuho Choi)
ASPEED PCIe controller driver:
- Fix clk and PHY leaks in aspeed_pcie_port_init() error paths (Liu
Zhenlong)
Broadcom iProc PCIe controller driver:
- Expose devm_pci_alloc_host_bridge_release() so drivers can share a
devm release function even if they don't need the device tree
parsing done by devm_pci_alloc_host_bridge() (Bjorn Helgaas)
- Request only the memory window from BCMA Enumeration ROM and warn
if it doesn't match the one in DT, which fixes an iproc-bcma probe
failure (Semih Baskan)
Broadcom STB PCIe controller driver:
- Replace bool properties for each SoC configuration with a u32
bitvector and a BFLAG() helper (Jim Quinlan)
- Use a similar BQUIRK() helper to test various SoC quirks (Jim
Quinlan)
Cadence PCIe controller driver:
- Remove device links to PHY, which are redundant because the PHY
core itself adds them (Vladimir Oltean)
- Return error (not success) from cdns_plat_pcie_probe() if
pm_runtime_get_sync() or cdns_pcie_ep_setup() failed (Vladimir
Oltean)
- Correct the driver data pointer usage; previously .probe() stored
'struct cdns_plat_pcie *', but .shutdown() used the pointer as
'struct cdns_pcie *', resulting in accessing garbage (Linmao Li)
ESWIN PCIe controller driver:
- Publish the platform driver MODULE_DEVICE_TABLE so the driver can
be autoloaded when built as a module (Pengpeng Hou)
Freescale i.MX6 PCIe controller driver:
- Fix resource and pwrctrl device leaks .probe() (Zhijian Han)
- Improve i.MX95 Gen3 link stability by changing MPLLB_BANDWIDTH from
default 120 to 140 (Richard Zhu)
- Use dev_err_probe() in host init error path to silence
-EPROBE_DEFER messages (Alexander Stein)
- Avoid dereferencing NULL clock names when 'clocks' includes more
phandles than 'clock-names' has names (Rudi Heitbaum)
- Add suspend_poweroff flag so platforms like i.MX that power off RC
controllers during suspend can enter L2 so endpoints can get
PME_Turn_Off notifications before power loss (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Enable PROBE_PREFER_ASYNCHRONOUS to reduce probe time of the four
controllers on LX2160A (Vincent Jardin)
Intel VMD host bridge driver:
- Flush DMA writes before handling MSI on Meteor Lake: MSI may arrive
before write has completed, resulting in an nvme 30 second stall
before a QID timeout and possibly other similar problems (Rickey
Bartlett)
- Flush DMA writes before handling MSI on Arrow Lake (Vladimir
Nedoshivin)
Marvell Aardvark PCIe controller driver:
- Disable PHY on probe failures (Myeonghun Pak)
Marvell MVEBU PCIe controller driver:
- Refcount child OF nodes during .probe() to make a concurrent OF
overlay removal safe (Krzysztof Kozlowski)
MediaTek PCIe controller driver:
- Find INTx DT property by 'interrupt-controller' name instead of
assuming it's the first child node (Zhengping Zhang)
MediaTek PCIe Gen3 controller driver:
- Fix a 64-bit type truncation in mtk_pcie_set_trans_table() to avoid
issues with windows above or larger than 4GB (Sreeraj S Kurup)
NVIDIA Tegra264 PCIe controller driver:
- Fix the Link Capabilities offset so we read the correct register
(Bjorn Helgaas)
Qualcomm PCIe controller driver:
- Only collect reset GPIOs from PCI bridge DT nodes to avoid stealing
resets used by downstream devices like USB controllers (Christopher
Obbard)
- Block accesses to downstream devices on link down to reduce a storm
of Completion Timeout AER interrupts (Qiang Yu)
- Skip system suspend/resume for firmware-managed PCIe, where
firmware manages clocks, regulators, resets, etc (Mrinmay Sarkar)
- Honor IOMMU provider's #iommu-cells in qcom_pcie_config_sid_1_9_0()
(Manivannan Sadhasivam)
- Deinitialize endpoint on remove (Guangshuo Li)
- Treat Root Port error recovery as successful even if link doesn't
come up after reset because the device was hot-unplugged (Konrad
Dybcio)
- Skip unnecessary iMSI-RX initialization if DT 'msi-map' is present,
indicating an external MSI controller (Ayiluri Naga Rashmi)
Renesas R-Car PCIe controller driver:
- Limit Max_Read_Request_Size to 256 to avoid hardware erratum (Marek
Vasut)
- Support PERST# via reset subsystem as well as the existing GPIO
support to prepare for R-Car Gen5 SoCs (Marek Vasut)
- Add DT and driver support for the R-Car Gen 5 X5H (R8A78000) PCIe
Gen 4 core (Marek Vasut)
- Add Application/Local register reset DT description and driver
support for both host and endpoint mode (Marek Vasut)
- Add PM ops so controller works after suspend/resume (Marek Vasut)
Renesas RZ/G3S PCIe controller driver:
- Disable refclk on probe failure (Lad Prabhakar)
- Propagate platform_get_irq_byname() errors so probe deferral works
correctly (Lad Prabhakar)
- Tear down INTx handlers if subsequent initialization fails (Lad
Prabhakar)
- Add RZ/G3L (R9A08G046) DT and driver support (Biju Das)
Rockchip PCIe controller driver:
- Limit host and endpoint controllers to 2.5 GT/s since 5.0 GT/s is
unsafe per Rockchip (Geraldo Nascimento)
Synopsys DesignWare PCIe controller driver:
- Set DMA_BYPASS bit in outbound IATU CTRL2 register to avoid data
corruption if the iATU translates DMA engine transactions (Sumit
Kumar)
- Use FIELD_PREP() to remove need for *_SHIFT definitions (Hans
Zhang)
TI DRA7xx PCIe controller driver:
- Remove device links to PHY, which are redundant because the PHY
core itself adds them (Vladimir Oltean)
- Fix optional clock leak when .probe() fails by using
devm_clk_get_optional_enabled() (Felix Gu)
TI Keystone PCIe controller driver:
- Remove device links to PHY, which are redundant because the PHY
core itself adds them (Vladimir Oltean)
UltraRISC PCIe controller driver:
- Allow DWC drivers to skip outbound iATU setup if they don't need
translation between CPU and PCI addresses (Xincheng Zhang)
- Skip MEM outbound iATU setup on DP1000 (Xincheng Zhang)
Xilinx Versal CPM PCIe controller driver:
- Add DT and driver support for optional PERST# for use in warm reset
scenarios (Sai Krishna Musham)
Xilinx XDMA PCIe controller driver:
- Fix device node reference leak in xilinx_pl_dma_pcie_init_irq_domain()
(Wentao Liang)"
* tag 'pci-v7.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (139 commits)
PCI/pwrctrl: Power off child devices on power-on failure
PCI/pwrctrl: Only destroy devices created by pwrctrl core
PCI/pwrctrl: generic: Fix leaking array from of_regulator_bulk_get_all()
PCI/pwrctrl: tc9563: Switch per-port reset to GPIO descriptor API
PCI/pwrctrl: tc9563: Add GPIO auxiliary device support
dt-bindings: PCI: toshiba,tc9563: Document embedded GPIO controller
gpio: tc9563: Add support for the embedded GPIO controller
PCI: qcom: Skip DWC MSI host initialization when DT 'msi-map' is present
PCI: qcom: Ignore -ENODEV after Root Port reset
PCI: qcom-ep: Deinitialize endpoint on remove
PCI/sysfs: Reject unaligned resource I/O port accesses
PCI: rcar-gen4: Add missing PM ops
PCI: endpoint: pci-epf-vntb: Honor MSI-X selection
PCI: endpoint: pci-epf-vntb: Use a local epf pointer in interrupt setup
PCI: dwc: imx6: Use regmap_assign_bits() for conditional set/clear
PCI: dwc: Describe DWC PCIe fields with full masks and FIELD_PREP()
PCI: dwc: Rename pp->irq_domain to pp->msi_irq_domain
PCI: dwc: Rename dw_pcie_allocate_domains() to dw_pcie_allocate_msi_domains()
PCI: dwc: Correct PCIE_DW_PLAT_EP reference in Kconfig help
PCI/ASPM: Disable ASPM when driver requests it
...