linux-toradex.git/drivers/pci/controller, branch v5.0 Linux kernel for Apalis and Colibri modules Merge tag 'pci-v5.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci 2019-02-01T07:06:17+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-02-01T07:06:17+00:00 44e56f325b7d63e8a53008956ce7b28e4272a599 Pull PCI fixes from Bjorn Helgaas: - Revert armada8k GPIO reset change that broke Macchiatobin booting (Baruch Siach) - Use actual size config reads on ARM cns3xxx (Koen Vandeputte) - Fix ARM cns3xxx config write alignment issue (Koen Vandeputte) - Fix imx6 PHY device link error checking (Leonard Crestez) - Fix imx6 probe failure on chips without separate PCI power domain (Leonard Crestez) * tag 'pci-v5.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI: armada8k: Add support for gpio controlled reset signal" ARM: cns3xxx: Use actual size reads for PCIe ARM: cns3xxx: Fix writing to wrong PCI config registers after alignment PCI: imx: Fix checking pd_pcie_phy device link addition PCI: imx: Fix probe failure without power domain 
Pull PCI fixes from Bjorn Helgaas:

 - Revert armada8k GPIO reset change that broke Macchiatobin booting
   (Baruch Siach)

 - Use actual size config reads on ARM cns3xxx (Koen Vandeputte)

 - Fix ARM cns3xxx config write alignment issue (Koen Vandeputte)

 - Fix imx6 PHY device link error checking (Leonard Crestez)

 - Fix imx6 probe failure on chips without separate PCI power domain
   (Leonard Crestez)

* tag 'pci-v5.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  Revert "PCI: armada8k: Add support for gpio controlled reset signal"
  ARM: cns3xxx: Use actual size reads for PCIe
  ARM: cns3xxx: Fix writing to wrong PCI config registers after alignment
  PCI: imx: Fix checking pd_pcie_phy device link addition
  PCI: imx: Fix probe failure without power domain
Revert "PCI: armada8k: Add support for gpio controlled reset signal" 2019-01-31T21:07:29+00:00 Baruch Siach baruch@tkos.co.il 2019-01-31T21:00:18+00:00 f14bcc0add3abecceca1a3fe538c4ec9566893f3 Revert commit 3d71746c42 ("PCI: armada8k: Add support for gpio controlled reset signal"). That commit breaks boot on Macchiatobin board when a Mellanox NIC is present in the PCIe slot. It turns out that full reset cycle requires first comphy serdes initialization. Reset signal toggle without comphy initialization makes access to PCI configuration registers stall indefinitely. U-Boot toggles the Macchiatobin PCIe reset line already at boot, after initializing the comphy serdes. So while commit 3d71746c42 ("PCI: armada8k: Add support for gpio controlled reset signal") enables PCIe on platforms that U-Boot does not touch the reset line (like Clearfog GT-8K), it breaks PCIe (and boot) on the Macchiatobin board. Revert commit 3d71746c42 ("PCI: armada8k: Add support for gpio controlled reset signal") entirely to fix the Macchiatobin regression. Reported-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> 
Revert commit 3d71746c42 ("PCI: armada8k: Add support for gpio controlled
reset signal").

That commit breaks boot on Macchiatobin board when a Mellanox NIC is
present in the PCIe slot.

It turns out that full reset cycle requires first comphy serdes
initialization. Reset signal toggle without comphy initialization makes
access to PCI configuration registers stall indefinitely. U-Boot toggles
the Macchiatobin PCIe reset line already at boot, after initializing the
comphy serdes.

So while commit 3d71746c42 ("PCI: armada8k: Add support for gpio controlled
reset signal") enables PCIe on platforms that U-Boot does not touch the
reset line (like Clearfog GT-8K), it breaks PCIe (and boot) on the
Macchiatobin board.

Revert commit 3d71746c42 ("PCI: armada8k: Add support for gpio controlled
reset signal") entirely to fix the Macchiatobin regression.

Reported-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
 PCI: imx: Fix checking pd_pcie_phy device link addition 2019-01-31T21:01:01+00:00 Leonard Crestez leonard.crestez@nxp.com 2019-01-31T20:59:56+00:00 a4ace4fa20072dfe60ab48ba227e50bc2d69c246 The check on the device_link_add() return value is wrong; this leads to erroneous code execution, so fix it. Fixes: 3f7cceeab895 ("PCI: imx: Add multi-pd support") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> 
The check on the device_link_add() return value is wrong;
this leads to erroneous code execution, so fix it.

Fixes: 3f7cceeab895 ("PCI: imx: Add multi-pd support")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
 PCI: imx: Fix probe failure without power domain 2019-01-31T20:59:50+00:00 Leonard Crestez leonard.crestez@nxp.com 2019-01-31T20:59:50+00:00 a6093ad7fc4962099d2d723bcca72f8175b58c82 On chips without a separate power domain for PCI (such as 6q/6qp) the imx6_pcie_attach_pd() function incorrectly returns an error. Fix by returning 0 if dev_pm_domain_attach_by_name() does not find anything. Fixes: 3f7cceeab895 ("PCI: imx: Add multi-pd support") Reported-by: Lukas F.Hartmann <lukas@mntmn.com> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> 
On chips without a separate power domain for PCI (such as 6q/6qp) the
imx6_pcie_attach_pd() function incorrectly returns an error.

Fix by returning 0 if dev_pm_domain_attach_by_name() does not find
anything.

Fixes: 3f7cceeab895 ("PCI: imx: Add multi-pd support")
Reported-by: Lukas F.Hartmann <lukas@mntmn.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
 Merge tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping 2019-01-12T18:52:40+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-01-12T18:52:40+00:00 66c56cfa64d9dbb9efa8a06c1aece77e8d57ea19 Pull dma_zalloc_coherent() removal from Christoph Hellwig: "We've always had a weird situation around dma_zalloc_coherent. To safely support mapping the allocations to userspace major architectures like x86 and arm have always zeroed allocations from dma_alloc_coherent, but a couple other architectures were missing that zeroing either always or in corner cases. Then later we grew anothe dma_zalloc_coherent interface to explicitly request zeroing, but that just added __GFP_ZERO to the allocation flags, which for some allocators that didn't end up using the page allocator ended up being a no-op and still not zeroing the allocations. So for this merge window I fixed up all remaining architectures to zero the memory in dma_alloc_coherent, and made dma_zalloc_coherent a no-op wrapper around dma_alloc_coherent, which fixes all of the above issues. dma_zalloc_coherent is now pointless and can go away, and Luis helped me writing a cocchinelle script and patch series to kill it, which I think we should apply now just after -rc1 to finally settle these issue" * tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: remove dma_zalloc_coherent() cross-tree: phase out dma_zalloc_coherent() on headers cross-tree: phase out dma_zalloc_coherent() 
Pull dma_zalloc_coherent() removal from Christoph Hellwig:
 "We've always had a weird situation around dma_zalloc_coherent. To
  safely support mapping the allocations to userspace major
  architectures like x86 and arm have always zeroed allocations from
  dma_alloc_coherent, but a couple other architectures were missing that
  zeroing either always or in corner cases.

  Then later we grew anothe dma_zalloc_coherent interface to explicitly
  request zeroing, but that just added __GFP_ZERO to the allocation
  flags, which for some allocators that didn't end up using the page
  allocator ended up being a no-op and still not zeroing the
  allocations.

  So for this merge window I fixed up all remaining architectures to
  zero the memory in dma_alloc_coherent, and made dma_zalloc_coherent a
  no-op wrapper around dma_alloc_coherent, which fixes all of the above
  issues.

  dma_zalloc_coherent is now pointless and can go away, and Luis helped
  me writing a cocchinelle script and patch series to kill it, which I
  think we should apply now just after -rc1 to finally settle these
  issue"

* tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: remove dma_zalloc_coherent()
  cross-tree: phase out dma_zalloc_coherent() on headers
  cross-tree: phase out dma_zalloc_coherent()
PCI: amlogic: Fix build failure due to missing gpio header 2019-01-08T15:01:44+00:00 Corentin Labbe clabbe@baylibre.com 2019-01-07T17:22:23+00:00 a3869d43c9800cf39496615361c83635fa3e7c82 Building the driver when GPIOLIB=n is not selected is causing the following compilation failure: drivers/pci/controller/dwc/pci-meson.c: In function 'meson_pcie_assert_reset': drivers/pci/controller/dwc/pci-meson.c:290:2: error: implicit declaration of function 'gpiod_set_value_cansleep'; did you mean 'gpio_set_value_cansleep'? [-Werror=implicit-function-declaration] gpiod_set_value_cansleep(mp->reset_gpio, 0); ^~~~~~~~~~~~~~~~~~~~~~~~ gpio_set_value_cansleep drivers/pci/controller/dwc/pci-meson.c: In function 'meson_pcie_probe': drivers/pci/controller/dwc/pci-meson.c:540:19: error: implicit declaration of function 'devm_gpiod_get'; did you mean 'devm_gpio_free'? [-Werror=implicit-function-declaration] mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); ^~~~~~~~~~~~~~ devm_gpio_free drivers/pci/controller/dwc/pci-meson.c:540:48: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'? mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); ^~~~~~~~~~~~~ GPIOF_INIT_LOW Add the missing linux/gpio/consumer.h header to fix it. Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> 
Building the driver when GPIOLIB=n is not selected is causing the following
compilation failure:

  drivers/pci/controller/dwc/pci-meson.c: In function 'meson_pcie_assert_reset':
  drivers/pci/controller/dwc/pci-meson.c:290:2: error: implicit declaration of function 'gpiod_set_value_cansleep'; did you mean 'gpio_set_value_cansleep'? [-Werror=implicit-function-declaration]
    gpiod_set_value_cansleep(mp->reset_gpio, 0);
    ^~~~~~~~~~~~~~~~~~~~~~~~
    gpio_set_value_cansleep
  drivers/pci/controller/dwc/pci-meson.c: In function 'meson_pcie_probe':
  drivers/pci/controller/dwc/pci-meson.c:540:19: error: implicit declaration of function 'devm_gpiod_get'; did you mean 'devm_gpio_free'? [-Werror=implicit-function-declaration]
    mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
		     ^~~~~~~~~~~~~~
		     devm_gpio_free
  drivers/pci/controller/dwc/pci-meson.c:540:48: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'?
    mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
						  ^~~~~~~~~~~~~
						  GPIOF_INIT_LOW

Add the missing linux/gpio/consumer.h header to fix it.

Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
[lorenzo.pieralisi@arm.com: commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
 cross-tree: phase out dma_zalloc_coherent() 2019-01-08T12:58:37+00:00 Luis Chamberlain mcgrof@kernel.org 2019-01-04T08:23:09+00:00 750afb08ca71310fcf0c4e2cb1565c63b8235b60 We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de> 
We already need to zero out memory for dma_alloc_coherent(), as such
using dma_zalloc_coherent() is superflous. Phase it out.

This change was generated with the following Coccinelle SmPL patch:

@ replace_dma_zalloc_coherent @
expression dev, size, data, handle, flags;
@@

-dma_zalloc_coherent(dev, size, handle, flags)
+dma_alloc_coherent(dev, size, handle, flags)

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
[hch: re-ran the script on the latest tree]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Merge tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci 2019-01-06T01:57:34+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-01-06T01:57:34+00:00 926b02d3eb547daa1d56cf9b586f31b270488b77 Pull PCI updates from Bjorn Helgaas: - Remove unused lists from ASPM pcie_link_state (Frederick Lawler) - Fix Broadcom CNB20LE host bridge unintended sign extension (Colin Ian King) - Expand Kconfig "PF" acronyms (Randy Dunlap) - Update MAINTAINERS for arch/x86/kernel/early-quirks.c (Bjorn Helgaas) - Add missing include to drivers/pci.h (Alexandru Gagniuc) - Override Synopsys USB 3.x HAPS device class so dwc3-haps can claim it instead of xhci (Thinh Nguyen) - Clean up P2PDMA documentation (Randy Dunlap) - Allow runtime PM even if driver doesn't supply callbacks (Jarkko Nikula) - Remove status check after submitting Switchtec MRPC Firmware Download commands to avoid Completion Timeouts (Kelvin Cao) - Set Switchtec coherent DMA mask to allow 64-bit DMA (Boris Glimcher) - Fix Switchtec SWITCHTEC_IOCTL_EVENT_IDX_ALL flag overwrite issue (Joey Zhang) - Enable write combining for Switchtec MRPC Input buffers (Kelvin Cao) - Add Switchtec MRPC DMA mode support (Wesley Sheng) - Skip VF scanning on powerpc, which does this in firmware (Sebastian Ott) - Add Amlogic Meson PCIe controller driver and DT bindings (Yue Wang) - Constify histb dw_pcie_host_ops structure (Julia Lawall) - Support multiple power domains for imx6 (Leonard Crestez) - Constify layerscape driver data (Stefan Agner) - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho) - Support armada8k GPIO reset (Baruch Siach) - Support suspend/resume support on imx6 (Leonard Crestez) - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren) - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov) - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi) - Mask DesignWare interrupts instead of disabling them to avoid lost interrupts (Marc Zyngier) - Add locking when acking DesignWare interrupts (Marc Zyngier) - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier) - Use devm resource parser in mediatek (Honghui Zhang) - Remove unused mediatek "num-lanes" DT property (Honghui Zhang) - Add UniPhier PCIe controller driver and DT bindings (Kunihiko Hayashi) - Enable MSI for imx6 downstream components (Richard Zhu) * tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (40 commits) PCI: imx: Enable MSI from downstream components s390/pci: skip VF scanning PCI/IOV: Add flag so platforms can skip VF scanning PCI/IOV: Factor out sriov_add_vfs() PCI: uniphier: Add UniPhier PCIe host controller support dt-bindings: PCI: Add UniPhier PCIe host controller description PCI: amlogic: Add the Amlogic Meson PCIe controller driver dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller arm64: dts: mt7622: Remove un-used property for PCIe arm: dts: mt7623: Remove un-used property for PCIe dt-bindings: PCI: MediaTek: Remove un-used property PCI: mediatek: Remove un-used variant in struct mtk_pcie_port MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry PCI: dwc: Don't hard-code DBI/ATU offset PCI: imx: Add imx6sx suspend/resume support PCI: armada8k: Add support for gpio controlled reset signal PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7 PCI: dwc: layerscape: Constify driver data PCI: imx: Add multi-pd support PCI: Override Synopsys USB 3.x HAPS device class ... 
Pull PCI updates from Bjorn Helgaas:

 - Remove unused lists from ASPM pcie_link_state (Frederick Lawler)

 - Fix Broadcom CNB20LE host bridge unintended sign extension (Colin Ian
   King)

 - Expand Kconfig "PF" acronyms (Randy Dunlap)

 - Update MAINTAINERS for arch/x86/kernel/early-quirks.c (Bjorn Helgaas)

 - Add missing include to drivers/pci.h (Alexandru Gagniuc)

 - Override Synopsys USB 3.x HAPS device class so dwc3-haps can claim it
   instead of xhci (Thinh Nguyen)

 - Clean up P2PDMA documentation (Randy Dunlap)

 - Allow runtime PM even if driver doesn't supply callbacks (Jarkko
   Nikula)

 - Remove status check after submitting Switchtec MRPC Firmware Download
   commands to avoid Completion Timeouts (Kelvin Cao)

 - Set Switchtec coherent DMA mask to allow 64-bit DMA (Boris Glimcher)

 - Fix Switchtec SWITCHTEC_IOCTL_EVENT_IDX_ALL flag overwrite issue
   (Joey Zhang)

 - Enable write combining for Switchtec MRPC Input buffers (Kelvin Cao)

 - Add Switchtec MRPC DMA mode support (Wesley Sheng)

 - Skip VF scanning on powerpc, which does this in firmware (Sebastian
   Ott)

 - Add Amlogic Meson PCIe controller driver and DT bindings (Yue Wang)

 - Constify histb dw_pcie_host_ops structure (Julia Lawall)

 - Support multiple power domains for imx6 (Leonard Crestez)

 - Constify layerscape driver data (Stefan Agner)

 - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho)

 - Support armada8k GPIO reset (Baruch Siach)

 - Support suspend/resume support on imx6 (Leonard Crestez)

 - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren)

 - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov)

 - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi)

 - Mask DesignWare interrupts instead of disabling them to avoid lost
   interrupts (Marc Zyngier)

 - Add locking when acking DesignWare interrupts (Marc Zyngier)

 - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier)

 - Use devm resource parser in mediatek (Honghui Zhang)

 - Remove unused mediatek "num-lanes" DT property (Honghui Zhang)

 - Add UniPhier PCIe controller driver and DT bindings (Kunihiko
   Hayashi)

 - Enable MSI for imx6 downstream components (Richard Zhu)

* tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (40 commits)
  PCI: imx: Enable MSI from downstream components
  s390/pci: skip VF scanning
  PCI/IOV: Add flag so platforms can skip VF scanning
  PCI/IOV: Factor out sriov_add_vfs()
  PCI: uniphier: Add UniPhier PCIe host controller support
  dt-bindings: PCI: Add UniPhier PCIe host controller description
  PCI: amlogic: Add the Amlogic Meson PCIe controller driver
  dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller
  arm64: dts: mt7622: Remove un-used property for PCIe
  arm: dts: mt7623: Remove un-used property for PCIe
  dt-bindings: PCI: MediaTek: Remove un-used property
  PCI: mediatek: Remove un-used variant in struct mtk_pcie_port
  MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry
  PCI: dwc: Don't hard-code DBI/ATU offset
  PCI: imx: Add imx6sx suspend/resume support
  PCI: armada8k: Add support for gpio controlled reset signal
  PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7
  PCI: dwc: layerscape: Constify driver data
  PCI: imx: Add multi-pd support
  PCI: Override Synopsys USB 3.x HAPS device class
  ...
Merge branch 'pci/imx6' 2019-01-02T21:31:15+00:00 Bjorn Helgaas bhelgaas@google.com 2019-01-02T21:31:15+00:00 72199051af6205049e96ee7ed34f4fc5f44d1baf - Enable MSI for imx6 downstream components (Richard Zhu) * pci/imx6: PCI: imx: Enable MSI from downstream components 
  - Enable MSI for imx6 downstream components (Richard Zhu)

* pci/imx6:
  PCI: imx: Enable MSI from downstream components
Merge branch 'remotes/lorenzo/pci/uniphier' 2019-01-02T21:31:15+00:00 Bjorn Helgaas bhelgaas@google.com 2019-01-02T21:31:15+00:00 cdf4f4dc118bafd97d0148d53730e396ece11afa - Add UniPhier PCIe controller driver and DT bindings (Kunihiko Hayashi) * remotes/lorenzo/pci/uniphier: PCI: uniphier: Add UniPhier PCIe host controller support dt-bindings: PCI: Add UniPhier PCIe host controller description # Conflicts: # drivers/pci/controller/dwc/Kconfig # drivers/pci/controller/dwc/Makefile 
  - Add UniPhier PCIe controller driver and DT bindings (Kunihiko Hayashi)

* remotes/lorenzo/pci/uniphier:
  PCI: uniphier: Add UniPhier PCIe host controller support
  dt-bindings: PCI: Add UniPhier PCIe host controller description

# Conflicts:
#	drivers/pci/controller/dwc/Kconfig
#	drivers/pci/controller/dwc/Makefile