If CDM_CHECK is enabled (by the DT "snps,enable-cdm-check" property), 'val'
is overwritten by PCIE_PL_CHK_REG_CONTROL_STATUS initialization.  Commit
ec7b952f453c ("PCI: dwc: Always enable CDM check if "snps,enable-cdm-check"
exists") did not account for further usage of 'val', so we wrote improper
values to PCIE_PORT_LINK_CONTROL when the CDM check is enabled.

Move the PCIE_PORT_LINK_CONTROL update to be completely after the
PCIE_PL_CHK_REG_CONTROL_STATUS register initialization.

[bhelgaas: commit log adapted from Serge's version]
Fixes: ec7b952f453c ("PCI: dwc: Always enable CDM check if "snps,enable-cdm-check" exists")
Link: https://lore.kernel.org/r/20230310123510.675685-2-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>

Pull phy updates from Vinod Koul:
 "This features a bunch of new device support, a couple of new drivers,
  yaml conversion and updates of a few drivers.

  Core support:

   - New devm_of_phy_optional_get() API with users and conversion

  New hardware support:

   - Mediatek MT7986 phy support

   - Qualcomm SM8550 UFS, PCIe, combo phy support, SM6115 / SM4250 USB3
     phy support, SM6350 combo phy support, SM6125 UFS PHY support amd
     SM8350 & SM8450 combo phy support

   - Qualcomm SNPS eUSB2 eUSB2 repeater drivers

   - Allwinner F1C100s USB PHY support

   - Tegra xusb support for Tegra234

  Updates:

   - Yaml conversion for Qualcomm pcie2 phy and usb-hsic-phy

   - G4 mode support in Qualcomm UFS phy and support for various SoCs

   - Yaml conversion for Meson usb2 phy

   - TI Type C support for usb phy for j721

   - Yaml conversion for Tegra xusb binding"

* tag 'phy-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (106 commits)
  phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater
  phy: qcom: Add QCOM SNPS eUSB2 repeater driver
  dt-bindings: phy: qcom,snps-eusb2-phy: Add phys property for the repeater
  dt-bindings: phy: Add qcom,snps-eusb2-repeater schema file
  dt-bindings: phy: amlogic,g12a-usb3-pcie-phy: add missing optional phy-supply property
  phy: rockchip-typec: Fix unsigned comparison with less than zero
  phy: rockchip-typec: fix tcphy_get_mode error case
  phy: qcom: snps-eusb2: Add missing headers
  phy: qcom-qmp-combo: Add support for SM8550
  phy: qcom-qmp: Add v6 DP register offsets
  phy: qcom-qmp: pcs-usb: Add v6 register offsets
  dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Document SM8550 compatible
  phy: qcom: Add QCOM SNPS eUSB2 driver
  dt-bindings: phy: Add qcom,snps-eusb2-phy schema file
  phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs
  phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets
  phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets
  phy: qcom-qmp: pcs-pcie: Add v6.20 register offsets
  phy: qcom-qmp: pcs-pcie: Add v6 register offsets
  phy: qcom-qmp: pcs: Add v6.20 register offsets
  ...

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Rework portdrv shutdown so it disables interrupts but doesn't
     disable bus mastering, which leads to hangs on Loongson LS7A

   - Add mechanism to prevent Max_Read_Request_Size (MRRS) increases,
     again to avoid hardware issues on Loongson LS7A (and likely other
     devices based on DesignWare IP)

   - Ignore devices with a firmware (DT or ACPI) node that says the
     device is disabled

  Resource management:

   - Distribute spare resources to unconfigured hotplug bridges at
     boot-time (not just when hot-adding such a bridge), which makes
     hot-adding devices to docks work better. Tried this in v6.1 but had
     to revert for regressions, so try again

   - Fix root bus issue that dropped resources that happened to end
     at 0, e.g., [bus 00]

  PCI device hotplug:

   - Remove device locking when marking device as disconnected so this
     doesn't have to wait for concurrent driver bind/unbind to complete

   - Quirk more Qualcomm bridges that don't fully implement the PCIe
     Slot Status 'Command Completed' bit

  Power management:

   - Account for _S0W of the target bridge in acpi_pci_bridge_d3() so we
     don't miss hot-add notifications for USB4 docks, Thunderbolt, etc

  Reset:

   - Observe delay after reset, e.g., resuming from system sleep,
     regardless of whether a bridge can suspend to D3cold at runtime

   - Wait for secondary bus to become ready after a bridge reset

  Virtualization:

   - Avoid FLR on some AMD FCH AHCI adapters where it doesn't work

   - Allow independent IOMMU groups for some Wangxun NICs that prevent
     peer-to-peer transactions but don't advertise an ACS Capability

  Error handling:

   - Configure End-to-End-CRC (ECRC) only if Linux owns the AER
     Capability

   - Remove redundant Device Control Error Reporting Enable in the AER
     service driver since this is already done for all devices during
     enumeration

  ASPM:

   - Add pci_enable_link_state() interface to allow drivers to enable
     ASPM link state

  Endpoint framework:

   - Move dra7xx and tegra194 linkup processing from hard IRQ to
     threaded IRQ handler

   - Add a separate lock for endpoint controller list of endpoint
     function drivers to prevent deadlock in callbacks

   - Pass events from endpoint controller to endpoint function drivers
     via callbacks instead of notifiers

  Synopsys DesignWare eDMA controller driver (acked by Vinod):

   - Fix CPU vs PCI address issues

   - Fix source vs destination address issues

   - Fix issues with interleaved transfer semantics

   - Fix channel count initialization issue (issue still exists in
     several other drivers)

   - Clean up and improve debugfs usage so it will work on platforms
     with several eDMA devices

  Baikal T-1 PCIe controller driver:

   - Set a 64-bit DMA mask

  Freescale i.MX6 PCIe controller driver:

   - Add i.MX8MM, i.MX8MQ, i.MX8MP endpoint mode DT binding and driver
     support

  Intel VMD host bridge driver:

   - Add quirk to configure PCIe ASPM and LTR. This is normally done by
     BIOS, and will be for future products

  Marvell MVEBU PCIe controller driver:

   - Mark this driver as broken in Kconfig since bugs prevent its daily
     usage

  MediaTek MT7621 PCIe controller driver:

   - Delay PHY port initialization to improve boot reliability for ZBT
     WE1326, ZBT WF3526-P, and some Netgear models

  Qualcomm PCIe controller driver:

   - Add MSM8998 DT compatible string

   - Unify MSM8996 and MSM8998 clock orderings

   - Add SM8350 DT binding and driver support

   - Add IPQ8074 Gen3 DT binding and driver support

   - Correct qcom,perst-regs in DT binding

   - Add qcom_pcie_host_deinit() so the PHY is powered off and
     regulators and clocks are disabled on late host-init errors

  Socionext UniPhier Pro5 controller driver:

   - Clean up uniphier-ep reg, clocks, resets, and their names in DT
     binding

  Synopsys DesignWare PCIe controller driver:

   - Restrict coherent DMA mask to 32 bits for MSI, but allow controller
     drivers to set 64-bit streaming DMA mask

   - Add eDMA engine support in both Root Port and Endpoint controllers

  Miscellaneous:

   - Remove MODULE_LICENSE from boolean drivers so they don't look like
     modules so modprobe can complain about them"

* tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (86 commits)
  PCI: dwc: Add Root Port and Endpoint controller eDMA engine support
  PCI: bt1: Set 64-bit DMA mask
  PCI: dwc: Restrict only coherent DMA mask for MSI address allocation
  dmaengine: dw-edma: Prepare dw_edma_probe() for builtin callers
  dmaengine: dw-edma: Depend on DW_EDMA instead of selecting it
  dmaengine: dw-edma: Add mem-mapped LL-entries support
  PCI: Remove MODULE_LICENSE so boolean drivers don't look like modules
  PCI: hv: Drop duplicate PCI_MSI dependency
  PCI/P2PDMA: Annotate RCU dereference
  PCI/sysfs: Constify struct kobj_type pci_slot_ktype
  PCI: hotplug: Allow marking devices as disconnected during bind/unbind
  PCI: pciehp: Add Qualcomm quirk for Command Completed erratum
  PCI: qcom: Add IPQ8074 Gen3 port support
  dt-bindings: PCI: qcom: Add IPQ8074 Gen3 port
  dt-bindings: PCI: qcom: Sort compatibles alphabetically
  PCI: qcom: Fix host-init error handling
  PCI: qcom: Add SM8350 support
  dt-bindings: PCI: qcom: Add SM8350
  dt-bindings: PCI: qcom-ep: Correct qcom,perst-regs
  dt-bindings: PCI: qcom: Unify MSM8996 and MSM8998 clock order
  ...

- Drop bogus kernel-doc marker in pci_endpoint_test.c (Randy Dunlap)

- Fix epf_ntb_mw_bar_clear() kernel-doc (Yang Yingliang)

- Constify struct kobj_type pci_slot_ktype (Thomas Weißschuh)

* pci/misc:
  PCI: hv: Drop duplicate PCI_MSI dependency
  PCI/sysfs: Constify struct kobj_type pci_slot_ktype
  PCI: endpoint: pci-epf-vntb: Add epf_ntb_mw_bar_clear() num_mws kernel-doc
  misc: pci_endpoint_test: Drop initial kernel-doc marker

- Add pci_enable_link_state() to allow drivers to enable ASPM link state
  (Michael Bottini)

- Add quirk to enable all ASPM link states and program LTR for devices
  below VMD (David E. Box)

* pci/controller/vmd:
  PCI: vmd: Add quirk to configure PCIe ASPM and LTR
  PCI: vmd: Create feature grouping for client products
  PCI: vmd: Use PCI_VDEVICE in device list
  PCI/ASPM: Add pci_enable_link_state()

- Add DT compatible for qcom MSM8998 (Krzysztof Kozlowski)

- Unify qcom MSM8996 and MSM8998 clock orderings (Krzysztof Kozlowski)

- Correct qcom,perst-regs (Krzysztof Kozlowski)

- Add qcom SM8350 DT binding and driver support (Dmitry Baryshkov)

- Add qcom_pcie_host_deinit() so the PHY is powered off and regulators and
  clocks are disabled on late host-init errors (Johan Hovold)

- Add IPQ8074 Gen3 port DT binding and driver support (the Gen2 port was
  already supported) (Robert Marko)

* pci/controller/qcom:
  PCI: qcom: Add IPQ8074 Gen3 port support
  dt-bindings: PCI: qcom: Add IPQ8074 Gen3 port
  dt-bindings: PCI: qcom: Sort compatibles alphabetically
  PCI: qcom: Fix host-init error handling
  PCI: qcom: Add SM8350 support
  dt-bindings: PCI: qcom: Add SM8350
  dt-bindings: PCI: qcom-ep: Correct qcom,perst-regs
  dt-bindings: PCI: qcom: Unify MSM8996 and MSM8998 clock order
  dt-bindings: PCI: qcom: Add MSM8998 specific compatible
  dt-bindings: PCI: qcom: Add oneOf to compatible match

- Mark mvebu driver as broken (Pali Rohár)

* pci/controller/mvebu:
  PCI: mvebu: Mark driver as BROKEN

- Delay PHY initialization to make boots reliable for ZBT WE1326 and ZBT
  WF3526-P and some Netgear models (Sergio Paracuellos)

* pci/controller/mt7621:
  PCI: mt7621: Delay phy ports initialization

- Add i.MX8MM, i.MX8MQ, i.MX8MP endpoint mode DT binding and driver support
  (Richard Zhu)

* pci/controller/imx6:
  PCI: imx6: Add i.MX8MP PCIe EP support
  PCI: imx6: Add i.MX8MM PCIe EP support
  PCI: imx6: Add i.MX8MQ PCIe EP support
  PCI: imx6: Add i.MX PCIe EP mode support
  misc: pci_endpoint_test: Add i.MX8 PCIe EP device support
  dt-bindings: imx6q-pcie: Add i.MX8MP PCIe EP mode compatible string
  dt-bindings: imx6q-pcie: Add i.MX8MQ PCIe EP mode compatible string
  dt-bindings: imx6q-pcie: Add i.MX8MM PCIe EP mode compatible string

- Release previously-requested DW eDMA IRQs if request_irq() fails (Serge
  Semin)

- Convert DW eDMA linked-list (ll) and data target (dt) from CPU-relative
  addresses to PCI bus addresses (Serge Semin)

- Fix missing src/dst address for interleaved transfers (Serge Semin)

- Enforce the DW eDMA restriction that interleaved transfers must increment
  src and dst addresses (Serge Semin)

- Fix some invalid interleaved transfer semantics (Serge Semin)

- Convert CPU-relative addresses to PCI bus addresses for eDMA engine
  (Serge Semin)

- Drop chancnt initialization from dw-edma-core, since it is managed by the
  dmaengine core, e.g., in dma_async_device_channel_register() (Serge Semin)

- Clean up bogus casting of debugfs_entries.reg addresses (Serge Semin)

- Ignore debugfs file/directory creation errors (Serge Semin)

- Allocate debugfs entries from the heap to prepare for multi-eDMA
  platforms (Serge Semin)

- Simplify and rework register accessors to remove another obstacle to
  multi-eDMA platforms (Serge Semin)

- Consolidate eDMA read/write channels in a single dma_device to simplify,
  better reflect the hardware design, and avoid a debugfs complaint (Serge
  Semin)

- Move eDMA-specific debugfs nodes into existing dmaengine subdirectory
  (Serge Semin)

- Fix a readq_ch() truncation from 64 to 32 bits (Serge Semin)

- Use existing readq()/writeq rather than hand-coding new ones (Serge
  Semin)

- Drop unnecessary data target region allocation in favor of existing
  dw_edma_chip members (Serge Semin)

- Use parent device in eDMA controller name to prepare for multi-eDMA
  platforms (Serge Semin)

- In addition to the existing MMIO accessors for linked list entries, add
  support for ioremapped entries for use by eDMA in Root Ports or local
  Endpoints (Serge Semin)

- Convert DW_EDMA_PCIE so it depends on DW_EDMA instead of selecting it
  (Serge Semin)

- Allow DWC drivers to set streaming DMA masks larger than 32 bits;
  previously both streaming and coherent DMA were limited to 32 bits
  because some PCI devices only support coherent 32-bit DMA for MSI (Serge
  Semin)

- Set 64-bit streaming and coherent DMA mask for the bt1 driver (Serge
  Semin)

- Add DW Root Port and Endpoint controller support for eDMA (Serge Semin)

* pci/controller/dwc:
  PCI: dwc: Add Root Port and Endpoint controller eDMA engine support
  PCI: bt1: Set 64-bit DMA mask
  PCI: dwc: Restrict only coherent DMA mask for MSI address allocation
  dmaengine: dw-edma: Prepare dw_edma_probe() for builtin callers
  dmaengine: dw-edma: Depend on DW_EDMA instead of selecting it
  dmaengine: dw-edma: Add mem-mapped LL-entries support
  dmaengine: dw-edma: Skip cleanup procedure if no private data found
  dmaengine: dw-edma: Replace chip ID number with device name
  dmaengine: dw-edma: Drop DT-region allocation
  dmaengine: dw-edma: Use non-atomic io-64 methods
  dmaengine: dw-edma: Fix readq_ch() return value truncation
  dmaengine: dw-edma: Use DMA engine device debugfs subdirectory
  dmaengine: dw-edma: Join read/write channels into a single device
  dmaengine: dw-edma: Move eDMA data pointer to debugfs node descriptor
  dmaengine: dw-edma: Simplify debugfs context CSRs init procedure
  dmaengine: dw-edma: Rename debugfs dentry variables to 'dent'
  dmaengine: dw-edma: Convert debugfs descs to being heap-allocated
  dmaengine: dw-edma: Add dw_edma prefix to debugfs nodes descriptor
  dmaengine: dw-edma: Stop checking debugfs_create_*() return value
  dmaengine: dw-edma: Drop unnecessary debugfs reg casts
  dmaengine: dw-edma: Drop chancnt initialization
  dmaengine: dw-edma: Add PCI bus address getter to the remote EP glue driver
  dmaengine: dw-edma: Add CPU to PCI bus address translation
  dmaengine: dw-edma: Fix invalid interleaved xfers semantics
  dmaengine: dw-edma: Don't permit non-inc interleaved xfers
  dmaengine: dw-edma: Fix missing src/dst address of interleaved xfers
  dmaengine: dw-edma: Convert ll/dt phys address to PCI bus/DMA address
  dmaengine: dw-edma: Release requested IRQs on failure
  dmaengine: Fix dma_slave_config.dst_addr description