* pci/host-tango: PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge support PCI: Add DT binding for Sigma Designs Tango PCIe controller Conflicts: drivers/pci/host/Kconfig drivers/pci/host/Makefile
This driver is required to work around several hardware bugs in the PCIe controller. The SMP8759 does not support legacy interrupts or IO space. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> [bhelgaas: add CONFIG_BROKEN dependency, various cleanups] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add support for the MediaTek PCIe Gen2 controller which can be found on MT7623 series SoCs. [bhelgaas: fold in mtk_pcie_parse_and_add_res() bugfix from http://lkml.kernel.org/r/1496644078-27122-1-git-send-email-ryder.lee@mediatek.com] [bhelgaas: fold in MAINTAINERS update from http://lkml.kernel.org/r/1497588789-28607-1-git-send-email-ryder.lee@mediatek.com] [bhelgaas: fold in pci_scan_root_bus_bridge() update and leak fix from http://lkml.kernel.org/r/1498555451-55073-2-git-send-email-ryder.lee@mediatek.com] [bhelgaas: fold in powerup fixes from http://lkml.kernel.org/r/1497866400-41844-2-git-send-email-ryder.lee@mediatek.com] [bhelgaas: fold in poweroff when link down fixes from http://lkml.kernel.org/r/1497866400-41844-3-git-send-email-ryder.lee@mediatek.com] [bhelgaas: fold in optional property fixes from http://lkml.kernel.org/r/1497866400-41844-4-git-send-email-ryder.lee@mediatek.com] [bhelgaas: set host->map_irq and host->swizzle_irq and drop pci_fixup_irqs(), remove unnecessary "return", rename mtk_pcie_link_is_up() to mtk_pcie_link_up() for consistency, add local struct device pointer] [bhelgaas: fold in pci_add_flags() removal from http://lkml.kernel.org/r/1499061300-55951-1-git-send-email-ryder.lee@mediatek.com] Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add a host bridge driver for the Faraday Technology FPPCI100 host bridge,
used for Cortina Systems Gemini SoC (SL3516) PCI Host Bridge.
This code is inspired by the out-of-tree OpenWRT patch and then extensively
rewritten for device tree and using the modern helpers to cut down and
modernize the code to all new PCI frameworks. A driver exists in U-Boot as
well.
Tested on the ITian Square One SQ201 NAS with the following result in the
boot log (trimmed to relevant parts):
OF: PCI: host bridge /soc/pci@50000000 ranges:
OF: PCI: IO 0x50000000..0x500fffff -> 0x00000000
OF: PCI: MEM 0x58000000..0x5fffffff -> 0x58000000
ftpci100 50000000.pci: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xfffff]
pci_bus 0000:00: root bus resource [mem 0x58000000-0x5fffffff]
ftpci100 50000000.pci:
DMA MEM1 BASE: 0x0000000000000000 -> 0x0000000007ffffff config 00070000
ftpci100 50000000.pci:
DMA MEM2 BASE: 0x0000000000000000 -> 0x0000000003ffffff config 00060000
ftpci100 50000000.pci:
DMA MEM3 BASE: 0x0000000000000000 -> 0x0000000003ffffff config 00060000
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-22
pci 0000:00:0c.0: BAR 0: assigned [mem 0x58000000-0x58007fff]
pci 0000:00:09.2: BAR 0: assigned [mem 0x58008000-0x580080ff]
pci 0000:00:09.0: BAR 4: assigned [io 0x1000-0x101f]
pci 0000:00:09.1: BAR 4: assigned [io 0x1020-0x103f]
pci 0000:00:09.0: enabling device (0140 -> 0141)
pci 0000:00:09.0: HCRESET not completed yet!
pci 0000:00:09.1: enabling device (0140 -> 0141)
pci 0000:00:09.1: HCRESET not completed yet!
pci 0000:00:09.2: enabling device (0140 -> 0142)
rt61pci 0000:00:0c.0: enabling device (0140 -> 0142)
ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected -
rt: 2561, rf: 0003, rev: 000c
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:09.2: EHCI Host Controller
ehci-pci 0000:00:09.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:09.2: irq 125, io mem 0x58008000
ehci-pci 0000:00:09.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:09.0: UHCI Host Controller
uhci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:09.0: HCRESET not completed yet!
uhci_hcd 0000:00:09.0: irq 123, io base 0x00001000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
uhci_hcd 0000:00:09.1: UHCI Host Controller
uhci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:09.1: HCRESET not completed yet!
uhci_hcd 0000:00:09.1: irq 124, io base 0x00001020
hub 3-0:1.0: USB hub found
hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
scsi 0:0:0:0: Direct-Access USB Flash Disk 1.00 PQ: 0 ANSI: 2
sd 0:0:0:0: [sda] 7900336 512-byte logical blocks: (4.04 GB/3.77 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI removable disk
ieee80211 phy0: rt2x00lib_request_firmware: Info -
Loading firmware file 'rt2561s.bin'
ieee80211 phy0: rt2x00lib_request_firmware: Info -
Firmware detected - version: 0.8
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
$ lspci
00:00.0 Class 0600: 159b:4321
00:09.2 Class 0c03: 1106:3104
00:09.0 Class 0c03: 1106:3038
00:09.1 Class 0c03: 1106:3038
00:0c.0 Class 0280: 1814:0301
$ cat /proc/interrupts
CPU0
123: 0 PCI 0 Edge uhci_hcd:usb2
124: 0 PCI 1 Edge uhci_hcd:usb3
125: 159 PCI 2 Edge ehci_hcd:usb1
126: 1082 PCI 3 Edge rt61pci
$ cat /proc/iomem
50000000-500000ff : /soc/pci@50000000
58000000-5fffffff : Gemini PCI MEM
58000000-58007fff : 0000:00:0c.0
58000000-58007fff : 0000:00:0c.0
58008000-580080ff : 0000:00:09.2
58008000-580080ff : ehci_hcd
The EHCI USB hub works fine; I can mount and manage files and the IRQs just
keep ticking up. I can issue iwlist wlan0 scanning and see all the WLANs
here. I don't have wpa_supplicant so have not tried connecting to them.
[bhelgaas: fold in %pap change from Arnd Bergmann <arnd@arndb.de>]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Janos Laube <janos.dev@gmail.com>
CC: Paulius Zaleckas <paulius.zaleckas@gmail.com>
CC: Hans Ulli Kroll <ulli.kroll@googlemail.com>
CC: Florian Fainelli <f.fainelli@gmail.com>
CC: Feng-Hsin Chiang <john453@faraday-tech.com>
CC: Greentime Hu <green.hu@gmail.com>
Group all the PCI drivers that use DesignWare core in dwc directory. dwc IP is capable of operating in both host mode and device mode and keeping it inside the *host* directory is misleading. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Acked-By: Joao Pinto <jpinto@synopsys.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Minghuan Lian <minghuan.Lian@freescale.com> Cc: Mingkai Hu <mingkai.hu@freescale.com> Cc: Roy Zang <tie-fei.zang@freescale.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Niklas Cassel <niklas.cassel@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Zhou Wang <wangzhou1@hisilicon.com> Cc: Gabriele Paoloni <gabriele.paoloni@huawei.com> Cc: Stanimir Varbanov <svarbanov@mm-sol.com>
Add Makefile comments to explain the Kconfig and build strategy for ARM64 drivers that work around not-quite-ECAM issues. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
PCIe controllers in X-Gene SoCs are not ECAM compliant: software needs to configure additional controller's register to address device at bus:dev:function. Add a quirk to discover controller MMIO register space and configure controller registers to select and address the target secondary device. The quirk will only be applied for X-Gene PCIe MCFG table with OEM revison 1, 2, 3 or 4 (PCIe controller v1 and v2 on X-Gene SoCs). Tested-by: Jon Masters <jcm@redhat.com> Signed-off-by: Duc Dang <dhdang@apm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
ThunderX pass1.x requires to emulate the EA headers for on-chip devices hence it has to use custom pci_thunder_ecam_ops for accessing PCI config space (pci-thunder-ecam.c). Add new entries to MCFG quirk array where it can be applied while probing ACPI based PCI host controller. ThunderX pass1.x is using the same way for accessing off-chip devices (so-called PEM) as silicon pass-2.x so we need to add PEM quirk entries too. Quirk is considered for ThunderX silicon pass1.x only which is identified via MCFG revision 2. ThunderX pass 1.x requires the following accessors: NUMA node 0 PCI segments 0- 3: pci_thunder_ecam_ops (MCFG quirk) NUMA node 0 PCI segments 4- 9: thunder_pem_ecam_ops (MCFG quirk) NUMA node 1 PCI segments 10-13: pci_thunder_ecam_ops (MCFG quirk) NUMA node 1 PCI segments 14-19: thunder_pem_ecam_ops (MCFG quirk) [bhelgaas: change Makefile/ifdefs so quirk doesn't depend on CONFIG_PCI_HOST_THUNDER_ECAM] Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
ThunderX PCIe controller to off-chip devices (so-called PEM) is not fully compliant with ECAM standard. It uses non-standard configuration space accessors (see thunder_pem_ecam_ops) and custom configuration space granulation (see bus_shift = 24). In order to access configuration space and probe PEM as ACPI-based PCI host controller we need to add MCFG quirk infrastructure. This involves: 1. A new thunder_pem_acpi_init() init function to locate PEM-specific register ranges using ACPI. 2. Export PEM thunder_pem_ecam_ops structure so it is visible to MCFG quirk code. 3. New quirk entries for each PEM segment. Each contains platform IDs, mentioned thunder_pem_ecam_ops and CFG resources. Quirk is considered for ThunderX silicon pass2.x only which is identified via MCFG revision 1. ThunderX pass 2.x requires the following accessors: NUMA Node 0 PCI segments 0- 3: pci_generic_ecam_ops (ECAM-compliant) NUMA Node 0 PCI segments 4- 9: thunder_pem_ecam_ops (MCFG quirk) NUMA Node 1 PCI segments 10-13: pci_generic_ecam_ops (ECAM-compliant) NUMA Node 1 PCI segments 14-19: thunder_pem_ecam_ops (MCFG quirk) [bhelgaas: adapt to use acpi_get_rc_resources(), update Makefile/ifdefs so quirk doesn't depend on CONFIG_PCI_HOST_THUNDER_PEM] Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The PCIe controller in Hip05/Hip06/Hip07 SoCs is not completely ECAM-compliant. It is non-ECAM only for the RC bus config space; for any other bus underneath the root bus it does support ECAM access. Add specific quirks for PCI config space accessors. This involves: 1. New initialization call hisi_pcie_init() to obtain RC base addresses from PNP0C02 at the root of the ACPI namespace (under \_SB). 2. New entry in common quirk array. [bhelgaas: move to pcie-hisi.c and change Makefile/ifdefs so quirk doesn't depend on CONFIG_PCI_HISI] Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>