Previously, the caller checked ATTN_LED() or PWR_LED() to see whether the slot has indicators before setting the indicator state. That clutters the caller unnecessarily, so this moves the test inside the callees. The test may not even be necessary; per spec it should be harmless to try to turn on a non-existent LED. But checking first does avoid unnecessary hotplug commands. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add symbolic constants for the PCIe Slot Control indicator and power control fields defined by spec and use them instead of open-coded hex constants. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use the PCI_EXP_SLTSTA definitions, not 0x1f, when clearing Slot Status bits. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
It's simpler to test the PCI_EXP_SLTSTA_PFD bit directly and to write the constant back to PCI_EXP_SLTSTA. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
We already have the vendor/device IDs from pci_setup_device(), so drop that info and print things that will be more useful for debugging: the slot number and presence of button/indicators/link active reporting/etc. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
These functions: pcie_enable_notification() pciehp_power_off_slot() pciehp_get_power_status() pciehp_get_attention_status() pciehp_set_attention_status() pciehp_get_latch_status() pciehp_get_adapter_status() pcie_write_cmd() now always return success, so this patch makes them void and drops the error-checking code in their callers. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
There's not much point in checking the return value from every config space access because the only likely errors are design-time things like unaligned accesses or invalid register numbers. The checking clutters the code significantly, so this patch removes it. No functional change. Reference: http://lkml.kernel.org/r/CA+55aFzP4xEbcNmZ+MS0SQ3LrULzSq+dBiT_X9U-bPpR-Ukgrw@mail.gmail.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The pciehp_readw() and pciehp_writew() wrappers only look up the pci_dev and call the PCIe Capability accessors, so we can make things a little more straightforward by just using the PCIe Capability accessors directly. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Fix whitespace, capitalization, and spelling errors. No functional change. I know "busses" is not an error, but "buses" was more common, so I used it consistently. Signed-off-by: Marta Rybczynska <rybczynska@gmail.com> (pci_reset_bridge_secondary_bus()) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
PCIe hotplug has a bus per slot, so we can just use a normal secondary bus reset. However, if a slot supports surprise removal, a bus reset can be seen as a presence detection change triggering a hot-remove followed by a hot-add. Disable presence detection from triggering an interrupt or being polled around the bus reset. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>