linux-toradex.git/drivers/pci/hotplug/shpchp.h, branch v2.6.34.3

PCI: Make current and maximum bus speeds part of the PCI core

2010-02-23T00:15:17+00:00

Move the max_bus_speed and cur_bus_speed into the pci_bus.  Expose the
values through the PCI slot driver instead of the hotplug slot driver.
Update all the hotplug drivers to use the pci_bus instead of their own
data structures.

Signed-off-by: Matthew Wilcox 
Signed-off-by: Jesse Barnes

PCI: change PCI nomenclature in drivers/pci/ (comment changes)

2009-12-16T21:37:53+00:00

Changing occurrences of variants of PCI-X and PCIe to the PCI-SIG
terms listed in the "Trademark and Logo Usage Guidelines".
http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf

Patch is limited to drivers/pci/ and changes concern comments only.

Signed-off-by: Stefan Assmann 
Signed-off-by: Jesse Barnes

PCI hotplug: shpchp: use generic pci_configure_slot()

2009-09-15T00:39:11+00:00

Use the generic pci_configure_slot() rather than the SHPC-specific
program_fw_provided_values().

Unlike the previous SHPC-specific code, pci_configure_slot() programs PCIe
settings when an _HPX method provides them, so if it's possible to have an
SHPC-managed PCIe device, it can now be configured.

Signed-off-by: Bjorn Helgaas 
Reviewed-by: Kenji Kaneshige 
Acked-by: Kenji Kaneshige 
Signed-off-by: Jesse Barnes

PCI hotplug: clean up acpi_get_hp_params_from_firmware() interface

2009-09-15T00:38:26+00:00

This patch makes acpi_get_hp_params_from_firmware() take a
pci_dev rather than a pci_bus and makes it return a standard
int errno rather than acpi_status.

Signed-off-by: Bjorn Helgaas 
Reviewed-by: Kenji Kaneshige 
Acked-by: Kenji Kaneshige 
Signed-off-by: Jesse Barnes

PCI: add missing KERN_* constants to printks

2009-03-20T02:29:27+00:00

According to kerneljanitors todo list all printk calls (beginning
a new line) should have an according KERN_* constant.
Those are the missing pieces here for the pci subsystem.

Signed-off-by: Frank Seidel 
Reviewed-by: Kenji Kaneshige 
Tested-by: Kenji Kaneshige 
Signed-off-by: Jesse Barnes

PCI hotplug: shpchp: message refinement

2008-10-23T23:14:00+00:00

This patch refines messages in shpchp module.  The main changes are as
follows:

 - remove the trailing "."
 - remove __func__ as much as possible
 - capitalize the first letter of messages
 - show PCI device address including its domain

Signed-off-by: Taku Izumi 
Signed-off-by: Jesse Barnes

PCI hotplug: shpchp: replace printk with dev_printk

2008-10-23T23:11:50+00:00

This patch replaces printks within shpchp module with dev_printks.

Signed-off-by: Taku Izumi 
Signed-off-by: Jesse Barnes

PCI: shcphp: remove 'name' parameter

2008-10-22T23:42:43+00:00

We do not need to manage our own name parameter, especially since
the PCI core can change it on our behalf, in the case of duplicate
slot names.

Remove 'name' from shpchp's version of struct slot.

This change also removes the unused struct task_event from the
slot structure.

Cc: kristen.c.accardi@intel.com
Acked-by: Kenji Kaneshige 
Signed-off-by: Alex Chiang 
Signed-off-by: Jesse Barnes

shpchp: check firmware before taking control

2008-06-10T17:59:53+00:00

Fix the following problems of shpchp driver about getting hotplug
control from firmware.

  - The shpchp driver must not control the hotplug controller if it
    fails to get control from the firmware. But current shpchp
    controls the hotplug controller regardless the result, because it
    doesn't check the return value of get_hp_hw_control_from_firmware().

  - Current shpchp driver doesn't support _OSC.

The pciehp driver already have the code for evaluating _OSC and OSHP
and shpchp and pciehp can share it. So this patch move that code from
pciehp to acpi_pcihp.c.

Signed-off-by: Kenji Kaneshige 
Signed-off-by: Jesse Barnes

PCI: replace remaining FUNCTION occurrences

2008-04-21T04:47:09+00:00

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison 
Signed-off-by: Greg Kroah-Hartman