<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-toradex.git/drivers/pci/hotplug, branch master</title>
<subtitle>Linux kernel for Apalis and Colibri modules</subtitle>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/'/>
<entry>
<title>treewide: Convert devm_kmalloc() family to the devm_kmalloc_obj() family</title>
<updated>2026-11-06T05:55:50+00:00</updated>
<author>
<name>Kees Cook</name>
<email>kees+treewide@kernel.org</email>
</author>
<published>2026-10-29T06:16:33+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=4dd10fbbeb9c33709edc89916e19c03c780a0751'/>
<id>4dd10fbbeb9c33709edc89916e19c03c780a0751</id>
<content type='text'>
Mirroring the earlier kmalloc_obj() conversion, convert the
device-managed allocators over to the type-based API using the now
updated scripts/coccinelle/api/kmalloc_objs.cocci. The size is derived
from the type rather than written out as a sizeof(), and the result is
a pointer to that type rather than void *, so a mismatch between the
size requested and the variable assigned becomes a build error instead
of being silently accepted.

The conversions break down as:

	6713	devm_kzalloc_obj()
	1749	devm_kzalloc_objs()
	 307	devm_kzalloc_flex()
	  91	devm_kmalloc_objs()
	  82	devm_kmalloc_obj()
	   2	devm_kmalloc_flex()

The rules deliberately leave alone allocations sized by a string or a
byte-sized type, or assigned to a pointer to a byte-sized type, since
those are byte buffers rather than objects. Allocations sized by a
multi-byte integer type are only converted when they are assigned to a
pointer to that same type, and allocations of pointers to integers or of
void pointers are left alone too. After this change, 528 files still
call devm_kmalloc(), devm_kzalloc(), devm_kcalloc(), or
devm_kmalloc_array().

Build tested with allmodconfig on x86_64, arm64, i386, arm, riscv, s390,
m68k, mips, parisc, sparc, loongarch, arc, xtensa, and openrisc with GCC
16.2.0 with no new warnings.

Signed-off-by: Kees Cook &lt;kees+treewide@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Mirroring the earlier kmalloc_obj() conversion, convert the
device-managed allocators over to the type-based API using the now
updated scripts/coccinelle/api/kmalloc_objs.cocci. The size is derived
from the type rather than written out as a sizeof(), and the result is
a pointer to that type rather than void *, so a mismatch between the
size requested and the variable assigned becomes a build error instead
of being silently accepted.

The conversions break down as:

	6713	devm_kzalloc_obj()
	1749	devm_kzalloc_objs()
	 307	devm_kzalloc_flex()
	  91	devm_kmalloc_objs()
	  82	devm_kmalloc_obj()
	   2	devm_kmalloc_flex()

The rules deliberately leave alone allocations sized by a string or a
byte-sized type, or assigned to a pointer to a byte-sized type, since
those are byte buffers rather than objects. Allocations sized by a
multi-byte integer type are only converted when they are assigned to a
pointer to that same type, and allocations of pointers to integers or of
void pointers are left alone too. After this change, 528 files still
call devm_kmalloc(), devm_kzalloc(), devm_kcalloc(), or
devm_kmalloc_array().

Build tested with allmodconfig on x86_64, arm64, i386, arm, riscv, s390,
m68k, mips, parisc, sparc, loongarch, arc, xtensa, and openrisc with GCC
16.2.0 with no new warnings.

Signed-off-by: Kees Cook &lt;kees+treewide@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'pci/portdrv'</title>
<updated>2026-10-21T18:20:26+00:00</updated>
<author>
<name>Bjorn Helgaas</name>
<email>bhelgaas@google.com</email>
</author>
<published>2026-10-21T18:20:26+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=3b5bba12f5fe443cda659978bfb0a3c6c5640bf3'/>
<id>3b5bba12f5fe443cda659978bfb0a3c6c5640bf3</id>
<content type='text'>
- Assume control of portdrv-related features only when portdrv is enabled,
  since we can't use them without portdrv (Kuppuswamy Sathyanarayanan)

- Tidy _OSC control bit checking (Kuppuswamy Sathyanarayanan)

- Centralize feature ownership checking so code only needs to check
  'host-&gt;native_X' and doesn't need to also check 'pcie_ports_native'
  (Kuppuswamy Sathyanarayanan)

* pci/portdrv:
  PCI/ACPI: Centralize pcie_ports_native checking
  PCI/ACPI: Tidy _OSC control bit checking
  PCI: Assume control of portdrv-related features only when portdrv enabled
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
- Assume control of portdrv-related features only when portdrv is enabled,
  since we can't use them without portdrv (Kuppuswamy Sathyanarayanan)

- Tidy _OSC control bit checking (Kuppuswamy Sathyanarayanan)

- Centralize feature ownership checking so code only needs to check
  'host-&gt;native_X' and doesn't need to also check 'pcie_ports_native'
  (Kuppuswamy Sathyanarayanan)

* pci/portdrv:
  PCI/ACPI: Centralize pcie_ports_native checking
  PCI/ACPI: Tidy _OSC control bit checking
  PCI: Assume control of portdrv-related features only when portdrv enabled
</pre>
</div>
</content>
</entry>
<entry>
<title>PCI/ACPI: Centralize pcie_ports_native checking</title>
<updated>2026-10-06T17:16:17+00:00</updated>
<author>
<name>Kuppuswamy Sathyanarayanan</name>
<email>sathyanarayanan.kuppuswamy@linux.intel.com</email>
</author>
<published>2026-10-02T21:18:27+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=4fe37866b0d92cdc45b62954a76489a9d9f8bd73'/>
<id>4fe37866b0d92cdc45b62954a76489a9d9f8bd73</id>
<content type='text'>
If the user booted with "pcie_ports=native", we take control of the PCIe
port services unconditionally, regardless of what _OSC says.

Centralize the testing of pcie_ports_native in acpi_pci_root_create(),
where we interpret the _OSC results, so other places only have to check
host_bridge-&gt;native_X and we don't have to sprinkle tests of
pcie_ports_native everywhere.

Rather than overriding the host_bridge-&gt;native_X flags after the fact, fold
"pcie_ports=native" into the _OSC control mask we evaluate, i.e., proceed
as though the platform had granted control of the port services.  That way
there is a single mechanism deciding each native_X flag, and we can report
exactly which features we are overriding _OSC for instead of just noting
that we are overriding something:

  acpi PNP0A08:00: _OSC: OS forcing control ("pcie_ports=native") of [PCIeHotplug PME AER DPC]

Forcing host_bridge-&gt;native_aer also restores DPC service binding under
"pcie_ports=native", which regressed in commit 97ca178c899d ("PCI/DPC:
Allow DPC on all Downstream Ports when OS controls AER").  That commit
replaced the AER service test in get_port_device_capability() with
host-&gt;native_aer, so DPC stayed off when host_bridge-&gt;native_aer was not
set.

This also extends "pcie_ports=native" to host_bridge-&gt;native_dpc, which had
no pcie_ports_native fallback before.  That effect is narrow.  native_dpc
is only consumed by pci_dpc_recovered(), where with CONFIG_PCIE_EDR=n it
previously gave up immediately and now lets pciehp wait for DPC recovery
before treating a Link Down as a hotplug event.

Fold "pcie_ports=dpc-native" into the control mask the same way, so
host_bridge-&gt;native_dpc reflects it as well, with the same narrow effect on
pci_dpc_recovered().  Move the pcie_ports_dpc_native declaration to
&lt;linux/pci.h&gt; so acpi_pci_root_create() can test it.

host_bridge-&gt;native_ltr is deliberately not forced.  "pcie_ports=" controls
PCIe port services and LTR is not one.  There is no PCIE_PORT_SERVICE_LTR,
and native_ltr is only used by pci_configure_ltr() to enable ASPM L1.2, so
forcing it would be an ASPM policy decision users did not ask for.

SHPC hotplug is left alone for a simpler reason: SHPC is a conventional PCI
feature rather than a PCIe one, so "pcie_ports=" has no bearing on it.

Fixes: 97ca178c899d ("PCI/DPC: Allow DPC on all Downstream Ports when OS controls AER")
Closes: https://lore.kernel.org/linux-pci/20260901064554.2178688-1-kanie@linux.alibaba.com/
Signed-off-by: Kuppuswamy Sathyanarayanan &lt;sathyanarayanan.kuppuswamy@linux.intel.com&gt;
Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Reviewed-by: Guixin Liu &lt;kanie@linux.alibaba.com&gt;
Acked-by: Rafael J. Wysocki (Intel) &lt;rafael@kernel.org&gt; # ACPI core
Link: https://patch.msgid.link/20261002211828.1293177-4-sathyanarayanan.kuppuswamy@linux.intel.com
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
If the user booted with "pcie_ports=native", we take control of the PCIe
port services unconditionally, regardless of what _OSC says.

Centralize the testing of pcie_ports_native in acpi_pci_root_create(),
where we interpret the _OSC results, so other places only have to check
host_bridge-&gt;native_X and we don't have to sprinkle tests of
pcie_ports_native everywhere.

Rather than overriding the host_bridge-&gt;native_X flags after the fact, fold
"pcie_ports=native" into the _OSC control mask we evaluate, i.e., proceed
as though the platform had granted control of the port services.  That way
there is a single mechanism deciding each native_X flag, and we can report
exactly which features we are overriding _OSC for instead of just noting
that we are overriding something:

  acpi PNP0A08:00: _OSC: OS forcing control ("pcie_ports=native") of [PCIeHotplug PME AER DPC]

Forcing host_bridge-&gt;native_aer also restores DPC service binding under
"pcie_ports=native", which regressed in commit 97ca178c899d ("PCI/DPC:
Allow DPC on all Downstream Ports when OS controls AER").  That commit
replaced the AER service test in get_port_device_capability() with
host-&gt;native_aer, so DPC stayed off when host_bridge-&gt;native_aer was not
set.

This also extends "pcie_ports=native" to host_bridge-&gt;native_dpc, which had
no pcie_ports_native fallback before.  That effect is narrow.  native_dpc
is only consumed by pci_dpc_recovered(), where with CONFIG_PCIE_EDR=n it
previously gave up immediately and now lets pciehp wait for DPC recovery
before treating a Link Down as a hotplug event.

Fold "pcie_ports=dpc-native" into the control mask the same way, so
host_bridge-&gt;native_dpc reflects it as well, with the same narrow effect on
pci_dpc_recovered().  Move the pcie_ports_dpc_native declaration to
&lt;linux/pci.h&gt; so acpi_pci_root_create() can test it.

host_bridge-&gt;native_ltr is deliberately not forced.  "pcie_ports=" controls
PCIe port services and LTR is not one.  There is no PCIE_PORT_SERVICE_LTR,
and native_ltr is only used by pci_configure_ltr() to enable ASPM L1.2, so
forcing it would be an ASPM policy decision users did not ask for.

SHPC hotplug is left alone for a simpler reason: SHPC is a conventional PCI
feature rather than a PCIe one, so "pcie_ports=" has no bearing on it.

Fixes: 97ca178c899d ("PCI/DPC: Allow DPC on all Downstream Ports when OS controls AER")
Closes: https://lore.kernel.org/linux-pci/20260901064554.2178688-1-kanie@linux.alibaba.com/
Signed-off-by: Kuppuswamy Sathyanarayanan &lt;sathyanarayanan.kuppuswamy@linux.intel.com&gt;
Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Reviewed-by: Guixin Liu &lt;kanie@linux.alibaba.com&gt;
Acked-by: Rafael J. Wysocki (Intel) &lt;rafael@kernel.org&gt; # ACPI core
Link: https://patch.msgid.link/20261002211828.1293177-4-sathyanarayanan.kuppuswamy@linux.intel.com
</pre>
</div>
</content>
</entry>
<entry>
<title>PCI: pciehp: Make 'pciehp_poll_mode' parameter read-only</title>
<updated>2026-09-21T17:48:07+00:00</updated>
<author>
<name>Runyu Xiao</name>
<email>runyu.xiao@seu.edu.cn</email>
</author>
<published>2026-09-21T14:26:08+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=5ab17178fca6026d329cb6ced33c30f3b7d3e50a'/>
<id>5ab17178fca6026d329cb6ced33c30f3b7d3e50a</id>
<content type='text'>
pciehp_request_irq() and pciehp_free_irq() select different resources based
on the global pciehp_poll_mode parameter. The parameter is currently
writable through sysfs, so changing it while a controller is active can
make teardown try to stop a nonexistent polling thread or call free_irq()
for an IRQ that was not requested.

Keep the parameter available for boot and module configuration, but prevent
runtime changes to the registration mode.

Reproducer:
Boot an x86_64 guest in QEMU with a native PCIe hotplug root port and an
e1000 device, using these device options:

  -device pcie-root-port,id=rp1,chassis=1,slot=1 -device e1000,bus=rp1

Pass "pcie_ports=native pciehp.pciehp_poll_mode=1" to the guest kernel.  As
root in the guest, replace the device name below with a bound pciehp
service device and run:

  # dev=0000:00:1c.0:pcie004
  # driver=/sys/bus/pci_express/drivers/pciehp
  # echo 0 &gt; /sys/module/pciehp/parameters/poll_mode
  # echo "$dev" &gt; "$driver/unbind"
  # dmesg | grep 'Trying to free already-free IRQ'

The unfixed kernel accepts the runtime mode change and reports the warning
when the service device is removed. The fixed kernel rejects the write and
removes the device without the warning. The mode change is a deliberate
privileged test action and is not expected during ordinary operation.

Assisted-by: LLM Codex
Signed-off-by: Runyu Xiao &lt;runyu.xiao@seu.edu.cn&gt;
Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Reviewed-by: Lukas Wunner &lt;lukas@wunner.de&gt;
Link: https://patch.msgid.link/20260921142608.270312-1-runyu.xiao@seu.edu.cn
Cc: stable@vger.kernel.org
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
pciehp_request_irq() and pciehp_free_irq() select different resources based
on the global pciehp_poll_mode parameter. The parameter is currently
writable through sysfs, so changing it while a controller is active can
make teardown try to stop a nonexistent polling thread or call free_irq()
for an IRQ that was not requested.

Keep the parameter available for boot and module configuration, but prevent
runtime changes to the registration mode.

Reproducer:
Boot an x86_64 guest in QEMU with a native PCIe hotplug root port and an
e1000 device, using these device options:

  -device pcie-root-port,id=rp1,chassis=1,slot=1 -device e1000,bus=rp1

Pass "pcie_ports=native pciehp.pciehp_poll_mode=1" to the guest kernel.  As
root in the guest, replace the device name below with a bound pciehp
service device and run:

  # dev=0000:00:1c.0:pcie004
  # driver=/sys/bus/pci_express/drivers/pciehp
  # echo 0 &gt; /sys/module/pciehp/parameters/poll_mode
  # echo "$dev" &gt; "$driver/unbind"
  # dmesg | grep 'Trying to free already-free IRQ'

The unfixed kernel accepts the runtime mode change and reports the warning
when the service device is removed. The fixed kernel rejects the write and
removes the device without the warning. The mode change is a deliberate
privileged test action and is not expected during ordinary operation.

Assisted-by: LLM Codex
Signed-off-by: Runyu Xiao &lt;runyu.xiao@seu.edu.cn&gt;
Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Reviewed-by: Lukas Wunner &lt;lukas@wunner.de&gt;
Link: https://patch.msgid.link/20260921142608.270312-1-runyu.xiao@seu.edu.cn
Cc: stable@vger.kernel.org
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'pci-v7.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci</title>
<updated>2026-08-23T19:44:10+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2026-08-23T19:44:10+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=570f7e331f5febb30f1384817463c7e42b65ca7d'/>
<id>570f7e331f5febb30f1384817463c7e42b65ca7d</id>
<content type='text'>
Pull PCI updates from Bjorn Helgaas:
 "Resource management:

   - Add hotplug reservation only once (not at each level of the
     hierarchy) so bridge windows don't grow more than necessary (Ilpo
     Järvinen)

  Driver binding:

   - Rework device matching so device ID lifetime only needs to cover
     the probe path since dynamic IDs can be removed at any time (Gary
     Guo)

  Error handling:

   - Update mappings of AER errors to agent &amp; layer and log them for
     each individual error when multiple errors detected (Lukas Wunner)

   - Log Error Source only once, not twice in separate messages (Lukas
     Wunner)

   - Emit TLP Log only for unmasked errors (Lukas Wunner)

   - Support Advisory Non-Fatal Errors (Lukas Wunner)

   - Allow DPC on all Downstream Ports, not just Root Ports, when OS
     controls AER (Darshit Shah)

  ASPM:

   - Program the same ASPM Control values for every function of
     multi-function devices, as recommended by the PCIe spec (Krishna
     Chaitanya Chundru)

   - Avoid L0s for Realtek RTS525A, where it causes an AER interrupt
     storm (Max Lee)

   - Avoid ASPM L0s, L1, and L1 PM Substates based on 'aspm-no-l0s',
     'aspm-no-l1' [1], and 'aspm-no-l1ss' DT properties (Krishna
     Chaitanya Chundru)

  Power management:

   - Allow D3 for native hotplug-capable Root Ports on non-x86 platforms
     (we avoid D3 for these ports on x86 because some old platforms
     didn't validate it) (Manivannan Sadhasivam)

   - Allow portdrv to claim Ports even if they don't support services
     (AER, PME, DPC, hotplug, etc) so it can do power management (Brian
     Norris)

  Power control:

   - Add support for PCIe WAKE# interrupt when described via DT (Krishna
     Chaitanya Chundru)

   - For the TC9563 PCIe switch:

       - Take a reference on the I2C adapter to avoid uninterruptible
         hang when unloading an I2C module while in-use (Johan Hovold)

       - Update DT binding and driver to restrict Tx Amplitude, DFE and
         N_FTS to USP, DSP1 and DSP2 (Manivannan Sadhasivam)

       - Power off only external-facing ports (DSP1, DSP2), leaving USP
         and DSP3 (aka VDSP) powered up (Manivannan Sadhasivam)

       - Move integrated MAC Endpoint out of the list of internal ports
         and configure it separately (Manivannan Sadhasivam)

  Virtualization:

   - Add ACS quirk for Pericom PI7C9X2G608 switches (Tim Harvey)

   - Fix a long-standing bug in the Intel PCH Root Port MPC ACS quirk
     that didn't update the intended INTEL_MPC_REG_IRBNCE bit because it
     used a 16-bit config write when a 32-bit write was intended
     (Mohamad Raizudeen)

  Procfs:

   - Avoid spurious runtime PM wakeup on config space accesses that are
     outside config space and fail before reaching PCI (Krzysztof
     Wilczyński)

   - Warn on user-space writes to kernel-exclusive config space regions,
     as we already do for sysfs (Krzysztof Wilczyński)

   - Check credentials of opener, not reader, for config space reads, as
     we already do for sysfs (Krzysztof Wilczyński)

  Sysfs:

   - In pci_write_legacy_io(), avoid out-of-bounds reads from the user
     buffer and fix incorrect ioport write data (1-byte writes on
     little-endian powerpc, 2- and 4-byte writes on big-endian powerpc)
     (Krzysztof Wilczyński)

   - In pci_read_legacy_io(), fix incorrect ioport read data for 2- and
     4-byte reads on big-endian powerpc (Krzysztof Wilczyński)

   - Fix I/O port accessor argument order in Alpha pci_legacy_write()
     (Krzysztof Wilczyński)

   - Avoid spurious runtime PM wakeup on config space accesses that are
     outside config space and fail before reaching PCI (Krzysztof
     Wilczyński)

   - Return -EINVAL, not -ENODEV, for mmap of I/O BAR that fails because
     the arch doesn't support it, as we do for procfs (Krzysztof
     Wilczyński)

   - Check for LOCKDOWN_PCI_ACCESS for legacy_io and legacy_mem, as we
     do for other config space accessors (Krzysztof Wilczyński)

  Peer-to-peer DMA:

   - Add Nvidia Vera Rubin to list of platforms that support P2PDMA
     (Leon Romanovsky)

  Endpoint framework:

   - Check doorbell SUCCESS bit in pci_endpoint_test to avoid treating
     some failures as successes (Niklas Cassel)

   - Fail doorbell test when the trigger IRQ is missed (Niklas Cassel)

  New native PCIe controller drivers:

   - Add DT binding and driver for NVIDIA Tegra264 (Thierry Reding)

  Native PCIe controllers:

   - Use common wait time definitions for PCIe link monitoring instead
     of defining driver-private duplicates (Thierry Reding)

  Generic host bridge driver:

   - Fix NULL pointer dereference that caused enumeration failures on
     32-bit CAM systems (Steffen Persvold)

  Amlogic Meson PCIe controller driver:

   - Correct the PERST# GPIO state so it remains asserted until power
     and REFCLK become stable to fix enumeration failure (Ronald
     Claveau)

  ASPEED PCIe controller driver:

   - Switch to irq_domain_create_linear() so we can obsolete
     irq_domain_add_linear() (Jiri Slaby)

  Cadence PCIe controller driver:

   - Add MODULE_DEVICE_TABLE to generate module aliases for OF-based
     module autoloading (Pengpeng Hou)

   - Add debugfs 'ltssm_status' file for LGA- and HPA-based Cadence
     controllers (Hans Zhang)

   - Support up to x4 (not x2) lanes for J200 (Takuma Fujiwara)

   - Fix host/endpoint dependencies for cadence-plat driver to fix link
     error when cadence-plat is built-in but the host or endpoint driver
     is modular (Aksh Garg)

  Freescale i.MX6 PCIe controller driver:

   - Add imx6 intr/aer/pme interrupt lines for i.MX95 (Richard Zhu)

   - Remove PERST# checking from pci_host_common_parse_port() so callers
     can decide whether to fall back to legacy DT binding with PERST# in
     the host bridge (Sherry Sun)

   - Fix build issues when PCI_PWRCTRL_GENERIC or PCI_HOST_COMMON is a
     module (Arnd Bergmann)

   - Create pwrctrl devices only once by doing it from imx_pcie_probe()
     instead of imx_pcie_host_init(), which is used during both probe
     and resume (Sherry Sun)

   - Use 'dw_pcie_rp-&gt;skip_pwrctrl_off' to avoid powering off devices
     during suspend to preserve wakeup capability (Sherry Sun)

   - Add runtime PM support for i.MX95 to allow dynamic power management
     when the link is idle (Richard Zhu)

  Intel VMD host bridge driver:

   - Support device ID 0x28C1 and assume that BIOS has already
     enumerated the hierarchy below VMD and stored bus range info for OS
     to use (Nirmal Patel)

   - Add support for VMCONFIG BUS_RESTRICT_CFG=3, which makes it
     possible to enumerate downstream devices on Intel Arrow Lake-HX
     systems and probably others (Ali Alaei)

   - Pay attention to _OSC negotiation for VMD hierarchy only when
     running on bare metal, not when running in a VM (Nirmal Patel)

   - Add Nova Lake (NVL) and Dunlow (DNL) Device IDs (Szymon Durawa)

  MediaTek PCIe controller driver:

   - Add support for PCIe controller in EcoNet EN7528 and EN751221 SoCs
     (Caleb James DeLisle)

  MediaTek PCIe Gen3 controller driver:

   - Add mediatek-gen3 'memory-region' for restricted DMA buffer
     (Chen-Yu Tsai)

  NVIDIA Tegra264 PCIe controller driver:

   - Distinguish Tegra264 C0 PCIe controller for internal GPU from C1-C5
     controllers so the unit address matches the first 'reg' entry
     (Thierry Reding)

   - Add Tegra264 Root Port stanzas to prepare for generic WAKE#
     handling (Thierry Reding)

  Qualcomm PCIe controller driver:

   - Add IPQ9650 compatible with global interrupt (Kathiravan
     Thirumoorthy)

   - Add IPQ5210 compatible with IPQ9574 fallback (Varadarajan
     Narayanan)

   - Add DT binding and driver support for Hawi SoC (Matthew Leung)

   - Skip PERST# GPIOs provided by downstream PCIe devices, which should
     be handled by drivers of those devices (Manivannan Sadhasivam)

   - Stop advertising Attention Button Present (no Qcom SoCs support
     Attention Buttons) so pciehp can use Presence Detect Changed events
     (Qiang Yu)

  Renesas R-Car PCIe controller driver:

   - Add rcar-gen4-pci-host optional 'msi-parent' for GIT ITS (Marek
     Vasut)

   - When MSI is enabled but iMSI-RX is not used, configure AXIINTC to
     allow GIT ITS to handle MSI (Marek Vasut)

   - Refactor GIC600 implementation to make it easier to add platforms
     that only support 32-bit addressing (Marek Vasut)

   - Add Renesas R-Car Gen4 S4/V4H/V4M to the list of GIC600
     integrations that only support 32-bit addressing (Marek Vasut)

  Renesas RZ/G3S PCIe controller driver:

   - Add DT binding and driver support for RZ/V2H(P) SoC, which contains
     two PCIe controllers, configured either as a single x4 link or two
     independent x2 link controllers (Lad Prabhakar)

  SpacemiT K1 PCIe controller driver:

   - Add missing MODULE_DEVICE_TABLE() to generate module alias info for
     OF-based module autoloading (Pengpeng Hou)

  StarFive PCIe controller driver:

   - Fix resource leaks on error paths in host_init() (Ali Tariq)

   - Fix runtime PM handling and teardown ordering to avoid register
     access while power or clocks are disabled (Ali Tariq)

   - Check for runtime PM resume failure to avoid register access while
     power or clocks are disabled (Ali Tariq)

  Synopsys DesignWare PCIe controller driver:

   - Add LECARC PMU IDs to the DWC RAS/DES VSEC list so it can take
     advantage of the existing debugfs support for silicon debug, error
     injection, and event counters (Brett Zhou)

   - Factor pcie_valid_speed() and pci_bus_speed2lnkctl2() out of bwctrl
     so they can be shared by the DWC core (Hans Zhang)

   - Flush MSI writes from endpoint before unmapping the iATU, as we
     already do for MSI-X writes (Niklas Cassel)

   - Unmap MSI iATU window before mapping MSI-X window, to avoid a
     subsequent MSI write using a disabled aperture and losing the
     interrupt (Niklas Cassel)

   - Change endpoint .pre_init() and .init() callbacks to return errors
     and handle them (Marek Vasut)

  UltraRISC PCIe controller driver:

   - Add 'core', 'dbi', and 'aux' clocks to DT binding and manage them
     in the driver (Jia Wang)

   - Use module_platform_driver() since this may be built as a module,
     though not removable because IRQs can't be safely disposed (Jia
     Wang)

  MicroSemi Switchtec management driver:

   - Add Microchip PCI1008 device ID and include it in NTB DMA alias
     quirk (Logan Gunthorpe)

  Miscellaneous:

   - Document how to write PCI Host Controller drivers (Manivannan
     Sadhasivam)

   - Fix typos in documentation (D'Orus Tsitera)

   - Use %pe format specifier to print error pointers so we get symbolic
     errname when available (Krzysztof Wilczyński)"

* tag 'pci-v7.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (124 commits)
  PCI: vmd: Add Nova Lake (NVL) and Dunlow (DNL) Device IDs
  PCI: tegra264: Add Tegra264 support
  dt-bindings: PCI: tegra264: Switch to PCIe Root Port bindings
  dt-bindings: PCI: tegra264: Strictly distinguish C0 from C1-C5
  PCI/AER: Support Advisory Non-Fatal Errors
  PCI: Fix 32-bit config write in Intel PCH Root Port MPC ACS quirk
  PCI: dwc: Handle return value from endpoint .pre_init callback
  PCI: dwc: Handle return value from endpoint .init callback
  PCI: dwc: Add PCI ID for LECARC PCIe PMU
  PCI/ASPM: Mask ASPM states based on Devicetree properties
  PCI/ASPM: Disable/restore ASPM on every function for multi-function devices
  Documentation: PCI: Document how to write PCI Host Controller drivers
  PCI/ASPM: Use pcie_capability_clear_and_set_word() for ASPM disable/restore
  PCI: Add support for PCIe WAKE# interrupt
  PCI: Allow D3 for native hotplug-capable Root Ports on non-x86 platforms
  dt-bindings: PCI: Correct white-space style
  PCI/ASPM: Avoid L0s for Realtek RTS525A
  PCI: ultrarisc: Use module_platform_driver()
  PCI: ultrarisc: Get and enable DP1000 PCIe controller clocks
  dt-bindings: PCI: ultrarisc: Add required DP1000 PCIe clocks
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull PCI updates from Bjorn Helgaas:
 "Resource management:

   - Add hotplug reservation only once (not at each level of the
     hierarchy) so bridge windows don't grow more than necessary (Ilpo
     Järvinen)

  Driver binding:

   - Rework device matching so device ID lifetime only needs to cover
     the probe path since dynamic IDs can be removed at any time (Gary
     Guo)

  Error handling:

   - Update mappings of AER errors to agent &amp; layer and log them for
     each individual error when multiple errors detected (Lukas Wunner)

   - Log Error Source only once, not twice in separate messages (Lukas
     Wunner)

   - Emit TLP Log only for unmasked errors (Lukas Wunner)

   - Support Advisory Non-Fatal Errors (Lukas Wunner)

   - Allow DPC on all Downstream Ports, not just Root Ports, when OS
     controls AER (Darshit Shah)

  ASPM:

   - Program the same ASPM Control values for every function of
     multi-function devices, as recommended by the PCIe spec (Krishna
     Chaitanya Chundru)

   - Avoid L0s for Realtek RTS525A, where it causes an AER interrupt
     storm (Max Lee)

   - Avoid ASPM L0s, L1, and L1 PM Substates based on 'aspm-no-l0s',
     'aspm-no-l1' [1], and 'aspm-no-l1ss' DT properties (Krishna
     Chaitanya Chundru)

  Power management:

   - Allow D3 for native hotplug-capable Root Ports on non-x86 platforms
     (we avoid D3 for these ports on x86 because some old platforms
     didn't validate it) (Manivannan Sadhasivam)

   - Allow portdrv to claim Ports even if they don't support services
     (AER, PME, DPC, hotplug, etc) so it can do power management (Brian
     Norris)

  Power control:

   - Add support for PCIe WAKE# interrupt when described via DT (Krishna
     Chaitanya Chundru)

   - For the TC9563 PCIe switch:

       - Take a reference on the I2C adapter to avoid uninterruptible
         hang when unloading an I2C module while in-use (Johan Hovold)

       - Update DT binding and driver to restrict Tx Amplitude, DFE and
         N_FTS to USP, DSP1 and DSP2 (Manivannan Sadhasivam)

       - Power off only external-facing ports (DSP1, DSP2), leaving USP
         and DSP3 (aka VDSP) powered up (Manivannan Sadhasivam)

       - Move integrated MAC Endpoint out of the list of internal ports
         and configure it separately (Manivannan Sadhasivam)

  Virtualization:

   - Add ACS quirk for Pericom PI7C9X2G608 switches (Tim Harvey)

   - Fix a long-standing bug in the Intel PCH Root Port MPC ACS quirk
     that didn't update the intended INTEL_MPC_REG_IRBNCE bit because it
     used a 16-bit config write when a 32-bit write was intended
     (Mohamad Raizudeen)

  Procfs:

   - Avoid spurious runtime PM wakeup on config space accesses that are
     outside config space and fail before reaching PCI (Krzysztof
     Wilczyński)

   - Warn on user-space writes to kernel-exclusive config space regions,
     as we already do for sysfs (Krzysztof Wilczyński)

   - Check credentials of opener, not reader, for config space reads, as
     we already do for sysfs (Krzysztof Wilczyński)

  Sysfs:

   - In pci_write_legacy_io(), avoid out-of-bounds reads from the user
     buffer and fix incorrect ioport write data (1-byte writes on
     little-endian powerpc, 2- and 4-byte writes on big-endian powerpc)
     (Krzysztof Wilczyński)

   - In pci_read_legacy_io(), fix incorrect ioport read data for 2- and
     4-byte reads on big-endian powerpc (Krzysztof Wilczyński)

   - Fix I/O port accessor argument order in Alpha pci_legacy_write()
     (Krzysztof Wilczyński)

   - Avoid spurious runtime PM wakeup on config space accesses that are
     outside config space and fail before reaching PCI (Krzysztof
     Wilczyński)

   - Return -EINVAL, not -ENODEV, for mmap of I/O BAR that fails because
     the arch doesn't support it, as we do for procfs (Krzysztof
     Wilczyński)

   - Check for LOCKDOWN_PCI_ACCESS for legacy_io and legacy_mem, as we
     do for other config space accessors (Krzysztof Wilczyński)

  Peer-to-peer DMA:

   - Add Nvidia Vera Rubin to list of platforms that support P2PDMA
     (Leon Romanovsky)

  Endpoint framework:

   - Check doorbell SUCCESS bit in pci_endpoint_test to avoid treating
     some failures as successes (Niklas Cassel)

   - Fail doorbell test when the trigger IRQ is missed (Niklas Cassel)

  New native PCIe controller drivers:

   - Add DT binding and driver for NVIDIA Tegra264 (Thierry Reding)

  Native PCIe controllers:

   - Use common wait time definitions for PCIe link monitoring instead
     of defining driver-private duplicates (Thierry Reding)

  Generic host bridge driver:

   - Fix NULL pointer dereference that caused enumeration failures on
     32-bit CAM systems (Steffen Persvold)

  Amlogic Meson PCIe controller driver:

   - Correct the PERST# GPIO state so it remains asserted until power
     and REFCLK become stable to fix enumeration failure (Ronald
     Claveau)

  ASPEED PCIe controller driver:

   - Switch to irq_domain_create_linear() so we can obsolete
     irq_domain_add_linear() (Jiri Slaby)

  Cadence PCIe controller driver:

   - Add MODULE_DEVICE_TABLE to generate module aliases for OF-based
     module autoloading (Pengpeng Hou)

   - Add debugfs 'ltssm_status' file for LGA- and HPA-based Cadence
     controllers (Hans Zhang)

   - Support up to x4 (not x2) lanes for J200 (Takuma Fujiwara)

   - Fix host/endpoint dependencies for cadence-plat driver to fix link
     error when cadence-plat is built-in but the host or endpoint driver
     is modular (Aksh Garg)

  Freescale i.MX6 PCIe controller driver:

   - Add imx6 intr/aer/pme interrupt lines for i.MX95 (Richard Zhu)

   - Remove PERST# checking from pci_host_common_parse_port() so callers
     can decide whether to fall back to legacy DT binding with PERST# in
     the host bridge (Sherry Sun)

   - Fix build issues when PCI_PWRCTRL_GENERIC or PCI_HOST_COMMON is a
     module (Arnd Bergmann)

   - Create pwrctrl devices only once by doing it from imx_pcie_probe()
     instead of imx_pcie_host_init(), which is used during both probe
     and resume (Sherry Sun)

   - Use 'dw_pcie_rp-&gt;skip_pwrctrl_off' to avoid powering off devices
     during suspend to preserve wakeup capability (Sherry Sun)

   - Add runtime PM support for i.MX95 to allow dynamic power management
     when the link is idle (Richard Zhu)

  Intel VMD host bridge driver:

   - Support device ID 0x28C1 and assume that BIOS has already
     enumerated the hierarchy below VMD and stored bus range info for OS
     to use (Nirmal Patel)

   - Add support for VMCONFIG BUS_RESTRICT_CFG=3, which makes it
     possible to enumerate downstream devices on Intel Arrow Lake-HX
     systems and probably others (Ali Alaei)

   - Pay attention to _OSC negotiation for VMD hierarchy only when
     running on bare metal, not when running in a VM (Nirmal Patel)

   - Add Nova Lake (NVL) and Dunlow (DNL) Device IDs (Szymon Durawa)

  MediaTek PCIe controller driver:

   - Add support for PCIe controller in EcoNet EN7528 and EN751221 SoCs
     (Caleb James DeLisle)

  MediaTek PCIe Gen3 controller driver:

   - Add mediatek-gen3 'memory-region' for restricted DMA buffer
     (Chen-Yu Tsai)

  NVIDIA Tegra264 PCIe controller driver:

   - Distinguish Tegra264 C0 PCIe controller for internal GPU from C1-C5
     controllers so the unit address matches the first 'reg' entry
     (Thierry Reding)

   - Add Tegra264 Root Port stanzas to prepare for generic WAKE#
     handling (Thierry Reding)

  Qualcomm PCIe controller driver:

   - Add IPQ9650 compatible with global interrupt (Kathiravan
     Thirumoorthy)

   - Add IPQ5210 compatible with IPQ9574 fallback (Varadarajan
     Narayanan)

   - Add DT binding and driver support for Hawi SoC (Matthew Leung)

   - Skip PERST# GPIOs provided by downstream PCIe devices, which should
     be handled by drivers of those devices (Manivannan Sadhasivam)

   - Stop advertising Attention Button Present (no Qcom SoCs support
     Attention Buttons) so pciehp can use Presence Detect Changed events
     (Qiang Yu)

  Renesas R-Car PCIe controller driver:

   - Add rcar-gen4-pci-host optional 'msi-parent' for GIT ITS (Marek
     Vasut)

   - When MSI is enabled but iMSI-RX is not used, configure AXIINTC to
     allow GIT ITS to handle MSI (Marek Vasut)

   - Refactor GIC600 implementation to make it easier to add platforms
     that only support 32-bit addressing (Marek Vasut)

   - Add Renesas R-Car Gen4 S4/V4H/V4M to the list of GIC600
     integrations that only support 32-bit addressing (Marek Vasut)

  Renesas RZ/G3S PCIe controller driver:

   - Add DT binding and driver support for RZ/V2H(P) SoC, which contains
     two PCIe controllers, configured either as a single x4 link or two
     independent x2 link controllers (Lad Prabhakar)

  SpacemiT K1 PCIe controller driver:

   - Add missing MODULE_DEVICE_TABLE() to generate module alias info for
     OF-based module autoloading (Pengpeng Hou)

  StarFive PCIe controller driver:

   - Fix resource leaks on error paths in host_init() (Ali Tariq)

   - Fix runtime PM handling and teardown ordering to avoid register
     access while power or clocks are disabled (Ali Tariq)

   - Check for runtime PM resume failure to avoid register access while
     power or clocks are disabled (Ali Tariq)

  Synopsys DesignWare PCIe controller driver:

   - Add LECARC PMU IDs to the DWC RAS/DES VSEC list so it can take
     advantage of the existing debugfs support for silicon debug, error
     injection, and event counters (Brett Zhou)

   - Factor pcie_valid_speed() and pci_bus_speed2lnkctl2() out of bwctrl
     so they can be shared by the DWC core (Hans Zhang)

   - Flush MSI writes from endpoint before unmapping the iATU, as we
     already do for MSI-X writes (Niklas Cassel)

   - Unmap MSI iATU window before mapping MSI-X window, to avoid a
     subsequent MSI write using a disabled aperture and losing the
     interrupt (Niklas Cassel)

   - Change endpoint .pre_init() and .init() callbacks to return errors
     and handle them (Marek Vasut)

  UltraRISC PCIe controller driver:

   - Add 'core', 'dbi', and 'aux' clocks to DT binding and manage them
     in the driver (Jia Wang)

   - Use module_platform_driver() since this may be built as a module,
     though not removable because IRQs can't be safely disposed (Jia
     Wang)

  MicroSemi Switchtec management driver:

   - Add Microchip PCI1008 device ID and include it in NTB DMA alias
     quirk (Logan Gunthorpe)

  Miscellaneous:

   - Document how to write PCI Host Controller drivers (Manivannan
     Sadhasivam)

   - Fix typos in documentation (D'Orus Tsitera)

   - Use %pe format specifier to print error pointers so we get symbolic
     errname when available (Krzysztof Wilczyński)"

* tag 'pci-v7.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (124 commits)
  PCI: vmd: Add Nova Lake (NVL) and Dunlow (DNL) Device IDs
  PCI: tegra264: Add Tegra264 support
  dt-bindings: PCI: tegra264: Switch to PCIe Root Port bindings
  dt-bindings: PCI: tegra264: Strictly distinguish C0 from C1-C5
  PCI/AER: Support Advisory Non-Fatal Errors
  PCI: Fix 32-bit config write in Intel PCH Root Port MPC ACS quirk
  PCI: dwc: Handle return value from endpoint .pre_init callback
  PCI: dwc: Handle return value from endpoint .init callback
  PCI: dwc: Add PCI ID for LECARC PCIe PMU
  PCI/ASPM: Mask ASPM states based on Devicetree properties
  PCI/ASPM: Disable/restore ASPM on every function for multi-function devices
  Documentation: PCI: Document how to write PCI Host Controller drivers
  PCI/ASPM: Use pcie_capability_clear_and_set_word() for ASPM disable/restore
  PCI: Add support for PCIe WAKE# interrupt
  PCI: Allow D3 for native hotplug-capable Root Ports on non-x86 platforms
  dt-bindings: PCI: Correct white-space style
  PCI/ASPM: Avoid L0s for Realtek RTS525A
  PCI: ultrarisc: Use module_platform_driver()
  PCI: ultrarisc: Get and enable DP1000 PCIe controller clocks
  dt-bindings: PCI: ultrarisc: Add required DP1000 PCIe clocks
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>PCI: Introduce PCI_SLOT_PLACEHOLDER constant for slot_nr placeholder value</title>
<updated>2026-08-12T19:47:49+00:00</updated>
<author>
<name>Farhan Ali</name>
<email>alifm@linux.ibm.com</email>
</author>
<published>2026-08-05T16:55:14+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=c243e6c470c4695965cc8287767925bc1d9a7867'/>
<id>c243e6c470c4695965cc8287767925bc1d9a7867</id>
<content type='text'>
Introduce a constant for placeholder value and update the kerneldoc for
pci_create_slot() to reference PCI_SLOT_PLACEHOLDER instead of -1
throughout. No functional change.

Suggested-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Signed-off-by: Farhan Ali &lt;alifm@linux.ibm.com&gt;
Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Cc: Madhavan Srinivasan &lt;maddy@linux.ibm.com&gt;
Cc: Tyrel Datwyler &lt;tyreld@linux.ibm.com&gt;
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://patch.msgid.link/20260805165518.794-2-alifm@linux.ibm.com
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Introduce a constant for placeholder value and update the kerneldoc for
pci_create_slot() to reference PCI_SLOT_PLACEHOLDER instead of -1
throughout. No functional change.

Suggested-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Signed-off-by: Farhan Ali &lt;alifm@linux.ibm.com&gt;
Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Cc: Madhavan Srinivasan &lt;maddy@linux.ibm.com&gt;
Cc: Tyrel Datwyler &lt;tyreld@linux.ibm.com&gt;
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://patch.msgid.link/20260805165518.794-2-alifm@linux.ibm.com
</pre>
</div>
</content>
</entry>
<entry>
<title>PCI: acpiphp_ibm: Do not use uninitialized device_class</title>
<updated>2026-07-10T20:28:42+00:00</updated>
<author>
<name>Rafael J. Wysocki</name>
<email>rafael.j.wysocki@intel.com</email>
</author>
<published>2026-07-06T12:40:22+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=985fb7419fe27bc2ba17397f9bd8cc52151350ba'/>
<id>985fb7419fe27bc2ba17397f9bd8cc52151350ba</id>
<content type='text'>
Passing an uninitialized pnp.device_class string to
acpi_bus_generate_netlink_event() is effectively equivalent
to passing an empty string literal to it.

Accordingly, make the driver do the latter instead of doing the former.

No intentional functional impact.

This will facilitate the removal of device_class from struct
acpi_device_pnp in the future.

Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Reviewed-by: Andy Shevchenko &lt;andriy.shevchenko@linux.intel.com&gt;
Link: https://patch.msgid.link/8730724.T7Z3S40VBb@rafael.j.wysocki
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Passing an uninitialized pnp.device_class string to
acpi_bus_generate_netlink_event() is effectively equivalent
to passing an empty string literal to it.

Accordingly, make the driver do the latter instead of doing the former.

No intentional functional impact.

This will facilitate the removal of device_class from struct
acpi_device_pnp in the future.

Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Reviewed-by: Andy Shevchenko &lt;andriy.shevchenko@linux.intel.com&gt;
Link: https://patch.msgid.link/8730724.T7Z3S40VBb@rafael.j.wysocki
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'pci/reset'</title>
<updated>2026-04-13T17:50:05+00:00</updated>
<author>
<name>Bjorn Helgaas</name>
<email>bhelgaas@google.com</email>
</author>
<published>2026-04-13T17:50:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=12b56ec723d2d736feb16ea6ea2505520de3cc58'/>
<id>12b56ec723d2d736feb16ea6ea2505520de3cc58</id>
<content type='text'>
- Update slot handling so all ARI functions are treated as being in the
  same slot.  They're all reset by Secondary Bus Reset, but previously
  drivers of ARI functions that appeared to be on a non-zero device weren't
  notified and fatal hardware errors could result (Keith Busch)

- Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug
  events (Keith Busch)

- Consolidate bus iteration across the _lock(), _unlock(), and _trylock()
  functions for pci_bus and pci_slot (Ilpo Järvinen)

- Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked by
  CXL because it has no effect (Vidya Sagar)

* pci/reset:
  PCI/CXL: Hide SBR from reset_methods if masked by CXL
  PCI: Consolidate pci_bus/slot_lock/unlock/trylock()
  PCI: Make reset_subordinate hotplug safe
  PCI: Allow all bus devices to use the same slot
  PCI: Rename __pci_bus_reset() and __pci_slot_reset()
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
- Update slot handling so all ARI functions are treated as being in the
  same slot.  They're all reset by Secondary Bus Reset, but previously
  drivers of ARI functions that appeared to be on a non-zero device weren't
  notified and fatal hardware errors could result (Keith Busch)

- Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug
  events (Keith Busch)

- Consolidate bus iteration across the _lock(), _unlock(), and _trylock()
  functions for pci_bus and pci_slot (Ilpo Järvinen)

- Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked by
  CXL because it has no effect (Vidya Sagar)

* pci/reset:
  PCI/CXL: Hide SBR from reset_methods if masked by CXL
  PCI: Consolidate pci_bus/slot_lock/unlock/trylock()
  PCI: Make reset_subordinate hotplug safe
  PCI: Allow all bus devices to use the same slot
  PCI: Rename __pci_bus_reset() and __pci_slot_reset()
</pre>
</div>
</content>
</entry>
<entry>
<title>PCI: rpaphp: Simplify with scoped for each OF child loop</title>
<updated>2026-03-17T21:19:21+00:00</updated>
<author>
<name>Krzysztof Kozlowski</name>
<email>krzysztof.kozlowski@oss.qualcomm.com</email>
</author>
<published>2026-03-17T13:33:26+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=79253d6fe1cc80938160be2625d270fe5a4252ee'/>
<id>79253d6fe1cc80938160be2625d270fe5a4252ee</id>
<content type='text'>
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.

Signed-off-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@oss.qualcomm.com&gt;
Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Reviewed-by: Jonathan Cameron &lt;jonathan.cameron@huawei.com&gt;
Reviewed-by: Ilpo Järvinen &lt;ilpo.jarvinen@linux.intel.com&gt;
Link: https://patch.msgid.link/20260317133322.266102-8-krzysztof.kozlowski@oss.qualcomm.com
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.

Signed-off-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@oss.qualcomm.com&gt;
Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Reviewed-by: Jonathan Cameron &lt;jonathan.cameron@huawei.com&gt;
Reviewed-by: Ilpo Järvinen &lt;ilpo.jarvinen@linux.intel.com&gt;
Link: https://patch.msgid.link/20260317133322.266102-8-krzysztof.kozlowski@oss.qualcomm.com
</pre>
</div>
</content>
</entry>
<entry>
<title>PCI: pnv_php: Simplify with scoped for each OF child loop</title>
<updated>2026-03-17T21:19:03+00:00</updated>
<author>
<name>Krzysztof Kozlowski</name>
<email>krzysztof.kozlowski@oss.qualcomm.com</email>
</author>
<published>2026-03-17T13:33:25+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=c4cac4a15c6e7a6f9517a2ddc9dc8d7d0d1aa11c'/>
<id>c4cac4a15c6e7a6f9517a2ddc9dc8d7d0d1aa11c</id>
<content type='text'>
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.

Signed-off-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@oss.qualcomm.com&gt;
Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Reviewed-by: Jonathan Cameron &lt;jonathan.cameron@huawei.com&gt;
Reviewed-by: Ilpo Järvinen &lt;ilpo.jarvinen@linux.intel.com&gt;
Link: https://patch.msgid.link/20260317133322.266102-7-krzysztof.kozlowski@oss.qualcomm.com
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.

Signed-off-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@oss.qualcomm.com&gt;
Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Reviewed-by: Jonathan Cameron &lt;jonathan.cameron@huawei.com&gt;
Reviewed-by: Ilpo Järvinen &lt;ilpo.jarvinen@linux.intel.com&gt;
Link: https://patch.msgid.link/20260317133322.266102-7-krzysztof.kozlowski@oss.qualcomm.com
</pre>
</div>
</content>
</entry>
</feed>
