linux-toradex.git/drivers/pci/hotplug, branch v3.12 Linux kernel for Apalis and Colibri modules Revert "ACPI / hotplug / PCI: Avoid doing too much for spurious notifies" 2013-10-30T14:28:52+00:00 Mika Westerberg mika.westerberg@linux.intel.com 2013-10-30T12:40:36+00:00 ab1225901da2d4cd2dcbae6840e93abbef417064 Commit 2dc4128 (ACPI / hotplug / PCI: Avoid doing too much for spurious notifies) changed the enable_slot() to check return value of pci_scan_slot() and if it is zero return early from the function. It means that there were no new devices in this particular slot. However, if a device appeared deeper in the hierarchy the code now ignores it causing things like Thunderbolt chaining fail to recognize new devices. The problem with Alex Williamson's machine was solved with commit a47d8c8 (ACPI / hotplug / PCI: Avoid parent bus rescans on spurious device checks) and hence we should be able to restore the original functionality that we always rescan on bus check notification. On a device check notification we still check what acpiphp_rescan_slot() returns and on zero bail out early. Fixes: 2dc41281b1d1 (ACPI / hotplug / PCI: Avoid doing too much for spurious notifies) Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
Commit 2dc4128 (ACPI / hotplug / PCI: Avoid doing too much for
spurious notifies) changed the enable_slot() to check return value of
pci_scan_slot() and if it is zero return early from the function. It
means that there were no new devices in this particular slot.

However, if a device appeared deeper in the hierarchy the code now
ignores it causing things like Thunderbolt chaining fail to recognize
new devices.

The problem with Alex Williamson's machine was solved with commit
a47d8c8 (ACPI / hotplug / PCI: Avoid parent bus rescans on spurious
device checks) and hence we should be able to restore the original
functionality that we always rescan on bus check notification.

On a device check notification we still check what acpiphp_rescan_slot()
returns and on zero bail out early.

Fixes: 2dc41281b1d1 (ACPI / hotplug / PCI: Avoid doing too much for spurious notifies)
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI / hotplug / PCI: Drop WARN_ON() from acpiphp_enumerate_slots() 2013-10-11T23:49:48+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2013-10-11T23:49:48+00:00 fd3cfebec3199bb89acead236b1ab12c349ed4e0 The WARN_ON() in acpiphp_enumerate_slots() triggers unnecessarily for devices whose bridges are going to be handled by native PCIe hotplug (pciehp) and the simplest way to prevent that from happening is to drop the WARN_ON(). References: https://bugzilla.kernel.org/show_bug.cgi?id=62831 Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
The WARN_ON() in acpiphp_enumerate_slots() triggers unnecessarily for
devices whose bridges are going to be handled by native PCIe hotplug
(pciehp) and the simplest way to prevent that from happening is to
drop the WARN_ON().

References: https://bugzilla.kernel.org/show_bug.cgi?id=62831
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI / hotplug / PCI: Fix error code path in acpiphp_enumerate_slots() 2013-10-11T23:47:43+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2013-10-11T11:20:50+00:00 5d4494573c1fed806b97c2a1ba619d50bb89d1ed One of the error code paths in acpiphp_enumerate_slots() is missing a pci_dev_put(bridge->pci_dev) call, so add it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> 
One of the error code paths in acpiphp_enumerate_slots() is missing
a pci_dev_put(bridge->pci_dev) call, so add it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Merge branch 'acpi-pci-hotplug' 2013-09-10T21:15:02+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2013-09-10T21:15:02+00:00 08e97ff2779ffd3e6eb05d28bafdbc1fbb531d20 * acpi-pci-hotplug: ACPI / hotplug / PCI: Avoid parent bus rescans on spurious device checks ACPI / hotplug / PCI: Use _OST to notify firmware about notify status ACPI / hotplug / PCI: Avoid doing too much for spurious notifies ACPI / hotplug / PCI: Don't trim devices before scanning the namespace 
* acpi-pci-hotplug:
  ACPI / hotplug / PCI: Avoid parent bus rescans on spurious device checks
  ACPI / hotplug / PCI: Use _OST to notify firmware about notify status
  ACPI / hotplug / PCI: Avoid doing too much for spurious notifies
  ACPI / hotplug / PCI: Don't trim devices before scanning the namespace
ACPI / hotplug / PCI: Avoid parent bus rescans on spurious device checks 2013-09-09T19:41:07+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2013-09-07T22:07:28+00:00 a47d8c8e72a5fa2e69117674c4b0b6cc79c5bc53 In the current ACPIPHP notify handler we always go directly for a rescan of the parent bus if we get a device check notification for a device that is not a bridge. However, this obviously is overzealous if nothing really changes, because this way we may rescan the whole PCI hierarchy pretty much in vain. That happens on Alex Williamson's machine whose ACPI tables contain device objects that are supposed to coresspond to PCIe root ports, but those ports aren't physically present (or at least they aren't visible in the PCI config space to us). The BIOS generates multiple device check notifies for those objects during boot and for each of them we go straight for the parent bus rescan, but the parent bus is the root bus in this particular case. In consequence, we rescan the whole PCI bus from the top several times in a row, which is completely unnecessary, increases boot time by 50% (after previous fixes) and generates excess dmesg output from the PCI subsystem. Fix the problem by checking if we can find anything new in the slot corresponding to the device we've got a device check notify for and doing nothig if that's not the case. The spec (ACPI 5.0, Section 5.6.6) appears to mandate this behavior, as it says: Device Check. Used to notify OSPM that the device either appeared or disappeared. If the device has appeared, OSPM will re-enumerate from the parent. If the device has disappeared, OSPM will invalidate the state of the device. OSPM may optimize out re-enumeration. Therefore, according to the spec, we are free to do nothing if nothing changes. References: https://bugzilla.kernel.org/show_bug.cgi?id=60865 Reported-and-tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
In the current ACPIPHP notify handler we always go directly for a
rescan of the parent bus if we get a device check notification for
a device that is not a bridge.  However, this obviously is
overzealous if nothing really changes, because this way we may rescan
the whole PCI hierarchy pretty much in vain.

That happens on Alex Williamson's machine whose ACPI tables contain
device objects that are supposed to coresspond to PCIe root ports,
but those ports aren't physically present (or at least they aren't
visible in the PCI config space to us).  The BIOS generates multiple
device check notifies for those objects during boot and for each of
them we go straight for the parent bus rescan, but the parent bus is
the root bus in this particular case.  In consequence, we rescan the
whole PCI bus from the top several times in a row, which is
completely unnecessary, increases boot time by 50% (after previous
fixes) and generates excess dmesg output from the PCI subsystem.

Fix the problem by checking if we can find anything new in the
slot corresponding to the device we've got a device check notify
for and doing nothig if that's not the case.

The spec (ACPI 5.0, Section 5.6.6) appears to mandate this behavior,
as it says:

  Device Check. Used to notify OSPM that the device either appeared
  or disappeared. If the device has appeared, OSPM will re-enumerate
  from the parent. If the device has disappeared, OSPM will
  invalidate the state of the device. OSPM may optimize out
  re-enumeration.

Therefore, according to the spec, we are free to do nothing if
nothing changes.

References: https://bugzilla.kernel.org/show_bug.cgi?id=60865
Reported-and-tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI / hotplug / PCI: Use _OST to notify firmware about notify status 2013-09-07T01:43:58+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2013-09-06T13:41:41+00:00 e532e84ea11399a6066f31641425a76dd012ce77 The spec suggests that we should use _OST to notify the platform about the status of notifications it sends us, for example so that it doesn't repeate a notification that has been handled already. This turns out to help reduce the amount of diagnostic output from the ACPIPHP subsystem and speed up boot on at least one system that generates multiple device check notifies for PCIe devices on the root bus during boot. Reported-and-tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
The spec suggests that we should use _OST to notify the platform
about the status of notifications it sends us, for example so that
it doesn't repeate a notification that has been handled already.

This turns out to help reduce the amount of diagnostic output from
the ACPIPHP subsystem and speed up boot on at least one system that
generates multiple device check notifies for PCIe devices on the root
bus during boot.

Reported-and-tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI / hotplug / PCI: Avoid doing too much for spurious notifies 2013-09-07T01:43:35+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2013-09-06T13:41:32+00:00 2dc41281b1d1178befe4b76adf817570a7f45ec1 Sometimes we may get a spurious device check or bus check notify for a hotplug device and in those cases we should avoid doing all of the configuration work needed when something actually changes. To that end, check the return value of pci_scan_slot() in enable_slot() and bail out early if it is 0. This turns out to help reduce the amount of diagnostic output from the ACPIPHP subsystem and speed up boot on at least one system that generates multiple device check notifies for PCIe devices on the root bus during boot. Reported-and-tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
Sometimes we may get a spurious device check or bus check notify for
a hotplug device and in those cases we should avoid doing all of the
configuration work needed when something actually changes.  To that
end, check the return value of pci_scan_slot() in enable_slot() and
bail out early if it is 0.

This turns out to help reduce the amount of diagnostic output from
the ACPIPHP subsystem and speed up boot on at least one system that
generates multiple device check notifies for PCIe devices on the root
bus during boot.

Reported-and-tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI / hotplug / PCI: Don't trim devices before scanning the namespace 2013-09-05T21:39:20+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2013-09-05T21:39:20+00:00 89ec2f2ee104970329139e6526a075113c92f650 In acpiphp_bus_add() we first remove device objects corresponding to the given handle and the ACPI namespace branch below it, which are then re-created by acpi_bus_scan(). This used to be done to clean up after surprise removals, but now we do the cleanup through trim_stale_devices() which checks if the devices in question are actually gone before removing them, so the device hierarchy trimming in acpiphp_bus_add() is not necessary any more and, moreover, it may lead to problems if it removes device objects corresponding to devices that are actually present. For this reason, remove the leftover acpiphp_bus_trim() from acpiphp_bus_add(). Reported-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
In acpiphp_bus_add() we first remove device objects corresponding to
the given handle and the ACPI namespace branch below it, which are
then re-created by acpi_bus_scan().  This used to be done to clean
up after surprise removals, but now we do the cleanup through
trim_stale_devices() which checks if the devices in question are
actually gone before removing them, so the device hierarchy trimming
in acpiphp_bus_add() is not necessary any more and, moreover, it may
lead to problems if it removes device objects corresponding to
devices that are actually present.

For this reason, remove the leftover acpiphp_bus_trim() from
acpiphp_bus_add().

Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci 2013-09-03T23:24:35+00:00 Linus Torvalds torvalds@linux-foundation.org 2013-09-03T23:24:35+00:00 a9238741987386bb549d61572973c7e62b2a4145 Pull PCI changes from Bjorn Helgaas: PCI device hotplug: - Use PCIe native hotplug, not ACPI hotplug, when possible (Neil Horman) - Assign resources on per-host bridge basis (Yinghai Lu) MPS (Max Payload Size): - Allow larger MPS settings below hotplug-capable Root Port (Yijing Wang) - Add warnings about unsafe MPS settings (Yijing Wang) - Simplify interface and messages (Bjorn Helgaas) SR-IOV: - Return -ENOSYS on non-SR-IOV devices (Stefan Assmann) - Update NumVFs register when disabling SR-IOV (Yijing Wang) Virtualization: - Add bus and slot reset support (Alex Williamson) - Fix ACS (Access Control Services) issues (Alex Williamson) Miscellaneous: - Simplify PCIe Capability accessors (Bjorn Helgaas) - Add pcibios_pm_ops for arch-specific hibernate stuff (Sebastian Ott) - Disable decoding during BAR sizing only when necessary (Zoltan Kiss) - Delay enabling bridges until they're needed (Yinghai Lu) - Split Designware support into Synopsys and Exynos parts (Jingoo Han) - Convert class code to use dev_groups (Greg Kroah-Hartman) - Cleanup Designware and Exynos I/O access wrappers (Seungwon Jeon) - Fix bridge I/O window alignment (Bjorn Helgaas) - Add pci_wait_for_pending_transaction() (Casey Leedom) - Use devm_ioremap_resource() in Marvell driver (Tushar Behera) * tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits) PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available PCI: exynos: Add I/O access wrappers PCI: designware: Drop "addr" arg from dw_pcie_readl_rc()/dw_pcie_writel_rc() PCI: Remove pcie_cap_has_devctl() PCI: Support PCIe Capability Slot registers only for ports with slots PCI: Remove PCIe Capability version checks PCI: Allow PCIe Capability link-related register access for switches PCI: Add offsets of PCIe capability registers PCI: Tidy bitmasks and spacing of PCIe capability definitions PCI: Remove obsolete comment reference to pci_pcie_cap2() PCI: Clarify PCI_EXP_TYPE_PCI_BRIDGE comment PCI: Rename PCIe capability definitions to follow convention PCI: Warn if unsafe MPS settings detected PCI: Fix MPS peer-to-peer DMA comment syntax PCI: Disable decoding for BAR sizing only when it was actually enabled PCI: Add comment about needing pci_msi_off() even when CONFIG_PCI_MSI=n PCI: Add pcibios_pm_ops for optional arch-specific hibernate functionality PCI: Don't restrict MPS for slots below Root Ports PCI: Simplify MPS test for Downstream Port PCI: Remove unnecessary check for pcie_get_mps() failure ... 
Pull PCI changes from Bjorn Helgaas:

  PCI device hotplug:
    - Use PCIe native hotplug, not ACPI hotplug, when possible (Neil Horman)
    - Assign resources on per-host bridge basis (Yinghai Lu)

  MPS (Max Payload Size):
    - Allow larger MPS settings below hotplug-capable Root Port (Yijing Wang)
    - Add warnings about unsafe MPS settings (Yijing Wang)
    - Simplify interface and messages (Bjorn Helgaas)

  SR-IOV:
    - Return -ENOSYS on non-SR-IOV devices (Stefan Assmann)
    - Update NumVFs register when disabling SR-IOV (Yijing Wang)

  Virtualization:
    - Add bus and slot reset support (Alex Williamson)
    - Fix ACS (Access Control Services) issues (Alex Williamson)

  Miscellaneous:
    - Simplify PCIe Capability accessors (Bjorn Helgaas)
    - Add pcibios_pm_ops for arch-specific hibernate stuff (Sebastian Ott)
    - Disable decoding during BAR sizing only when necessary (Zoltan Kiss)
    - Delay enabling bridges until they're needed (Yinghai Lu)
    - Split Designware support into Synopsys and Exynos parts (Jingoo Han)
    - Convert class code to use dev_groups (Greg Kroah-Hartman)
    - Cleanup Designware and Exynos I/O access wrappers (Seungwon Jeon)
    - Fix bridge I/O window alignment (Bjorn Helgaas)
    - Add pci_wait_for_pending_transaction() (Casey Leedom)
    - Use devm_ioremap_resource() in Marvell driver (Tushar Behera)

* tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits)
  PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available
  PCI: exynos: Add I/O access wrappers
  PCI: designware: Drop "addr" arg from dw_pcie_readl_rc()/dw_pcie_writel_rc()
  PCI: Remove pcie_cap_has_devctl()
  PCI: Support PCIe Capability Slot registers only for ports with slots
  PCI: Remove PCIe Capability version checks
  PCI: Allow PCIe Capability link-related register access for switches
  PCI: Add offsets of PCIe capability registers
  PCI: Tidy bitmasks and spacing of PCIe capability definitions
  PCI: Remove obsolete comment reference to pci_pcie_cap2()
  PCI: Clarify PCI_EXP_TYPE_PCI_BRIDGE comment
  PCI: Rename PCIe capability definitions to follow convention
  PCI: Warn if unsafe MPS settings detected
  PCI: Fix MPS peer-to-peer DMA comment syntax
  PCI: Disable decoding for BAR sizing only when it was actually enabled
  PCI: Add comment about needing pci_msi_off() even when CONFIG_PCI_MSI=n
  PCI: Add pcibios_pm_ops for optional arch-specific hibernate functionality
  PCI: Don't restrict MPS for slots below Root Ports
  PCI: Simplify MPS test for Downstream Port
  PCI: Remove unnecessary check for pcie_get_mps() failure
  ...
Merge tag 'pm+acpi-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm 2013-09-03T22:59:39+00:00 Linus Torvalds torvalds@linux-foundation.org 2013-09-03T22:59:39+00:00 40031da445fb4d269af9c7c445b2adf674f171e7 Pull ACPI and power management updates from Rafael Wysocki: 1) ACPI-based PCI hotplug (ACPIPHP) subsystem rework and introduction of Intel Thunderbolt support on systems that use ACPI for signalling Thunderbolt hotplug events. This also should make ACPIPHP work in some cases in which it was known to have problems. From Rafael J Wysocki, Mika Westerberg and Kirill A Shutemov. 2) ACPI core code cleanups and dock station support cleanups from Jiang Liu and Rafael J Wysocki. 3) Fixes for locking problems related to ACPI device hotplug from Rafael J Wysocki. 4) ACPICA update to version 20130725 includig fixes, cleanups, support for more than 256 GPEs per GPE block and a change to make the ACPI PM Timer optional (we've seen systems without the PM Timer in the field already). One of the fixes, related to the DeRefOf operator, is necessary to prevent some Windows 8 oriented AML from causing problems to happen. From Bob Moore, Lv Zheng, and Jung-uk Kim. 5) Removal of the old and long deprecated /proc/acpi/event interface and related driver changes from Thomas Renninger. 6) ACPI and Xen changes to make the reduced hardware sleep work with the latter from Ben Guthro. 7) ACPI video driver cleanups and a blacklist of systems that should not tell the BIOS that they are compatible with Windows 8 (or ACPI backlight and possibly other things will not work on them). From Felipe Contreras. 8) Assorted ACPI fixes and cleanups from Aaron Lu, Hanjun Guo, Kuppuswamy Sathyanarayanan, Lan Tianyu, Sachin Kamat, Tang Chen, Toshi Kani, and Wei Yongjun. 9) cpufreq ondemand governor target frequency selection change to reduce oscillations between min and max frequencies (essentially, it causes the governor to choose target frequencies proportional to load) from Stratos Karafotis. 10) cpufreq fixes allowing sysfs attributes file permissions to be preserved over suspend/resume cycles Srivatsa S Bhat. 11) Removal of Device Tree parsing for CPU device nodes from multiple cpufreq drivers that required some changes related to of_get_cpu_node() to be made in a few architectures and in the driver core. From Sudeep KarkadaNagesha. 12) cpufreq core fixes and cleanups related to mutual exclusion and driver module references from Viresh Kumar, Lukasz Majewski and Rafael J Wysocki. 13) Assorted cpufreq fixes and cleanups from Amit Daniel Kachhap, Bartlomiej Zolnierkiewicz, Hanjun Guo, Jingoo Han, Joseph Lo, Julia Lawall, Li Zhong, Mark Brown, Sascha Hauer, Stephen Boyd, Stratos Karafotis, and Viresh Kumar. 14) Fixes to prevent race conditions in coupled cpuidle from happening from Colin Cross. 15) cpuidle core fixes and cleanups from Daniel Lezcano and Tuukka Tikkanen. 16) Assorted cpuidle fixes and cleanups from Daniel Lezcano, Geert Uytterhoeven, Jingoo Han, Julia Lawall, Linus Walleij, and Sahara. 17) System sleep tracing changes from Todd E Brandt and Shuah Khan. 18) PNP subsystem conversion to using struct dev_pm_ops for power management from Shuah Khan. * tag 'pm+acpi-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (217 commits) cpufreq: Don't use smp_processor_id() in preemptible context cpuidle: coupled: fix race condition between pokes and safe state cpuidle: coupled: abort idle if pokes are pending cpuidle: coupled: disable interrupts after entering safe state ACPI / hotplug: Remove containers synchronously driver core / ACPI: Avoid device hot remove locking issues cpufreq: governor: Fix typos in comments cpufreq: governors: Remove duplicate check of target freq in supported range cpufreq: Fix timer/workqueue corruption due to double queueing ACPI / EC: Add ASUSTEK L4R to quirk list in order to validate ECDT ACPI / thermal: Add check of "_TZD" availability and evaluating result cpufreq: imx6q: Fix clock enable balance ACPI: blacklist win8 OSI for buggy laptops cpufreq: tegra: fix the wrong clock name cpuidle: Change struct menu_device field types cpuidle: Add a comment warning about possible overflow cpuidle: Fix variable domains in get_typical_interval() cpuidle: Fix menu_device->intervals type cpuidle: CodingStyle: Break up multiple assignments on single line cpuidle: Check called function parameter in get_typical_interval() ... 
Pull ACPI and power management updates from Rafael Wysocki:

 1) ACPI-based PCI hotplug (ACPIPHP) subsystem rework and introduction
    of Intel Thunderbolt support on systems that use ACPI for signalling
    Thunderbolt hotplug events.  This also should make ACPIPHP work in
    some cases in which it was known to have problems.  From
    Rafael J Wysocki, Mika Westerberg and Kirill A Shutemov.

 2) ACPI core code cleanups and dock station support cleanups from
    Jiang Liu and Rafael J Wysocki.

 3) Fixes for locking problems related to ACPI device hotplug from
    Rafael J Wysocki.

 4) ACPICA update to version 20130725 includig fixes, cleanups, support
    for more than 256 GPEs per GPE block and a change to make the ACPI
    PM Timer optional (we've seen systems without the PM Timer in the
    field already).  One of the fixes, related to the DeRefOf operator,
    is necessary to prevent some Windows 8 oriented AML from causing
    problems to happen.  From Bob Moore, Lv Zheng, and Jung-uk Kim.

 5) Removal of the old and long deprecated /proc/acpi/event interface
    and related driver changes from Thomas Renninger.

 6) ACPI and Xen changes to make the reduced hardware sleep work with
    the latter from Ben Guthro.

 7) ACPI video driver cleanups and a blacklist of systems that should
    not tell the BIOS that they are compatible with Windows 8 (or ACPI
    backlight and possibly other things will not work on them).  From
    Felipe Contreras.

 8) Assorted ACPI fixes and cleanups from Aaron Lu, Hanjun Guo,
    Kuppuswamy Sathyanarayanan, Lan Tianyu, Sachin Kamat, Tang Chen,
    Toshi Kani, and Wei Yongjun.

 9) cpufreq ondemand governor target frequency selection change to
    reduce oscillations between min and max frequencies (essentially,
    it causes the governor to choose target frequencies proportional
    to load) from Stratos Karafotis.

10) cpufreq fixes allowing sysfs attributes file permissions to be
    preserved over suspend/resume cycles Srivatsa S Bhat.

11) Removal of Device Tree parsing for CPU device nodes from multiple
    cpufreq drivers that required some changes related to
    of_get_cpu_node() to be made in a few architectures and in the
    driver core.  From Sudeep KarkadaNagesha.

12) cpufreq core fixes and cleanups related to mutual exclusion and
    driver module references from Viresh Kumar, Lukasz Majewski and
    Rafael J Wysocki.

13) Assorted cpufreq fixes and cleanups from Amit Daniel Kachhap,
    Bartlomiej Zolnierkiewicz, Hanjun Guo, Jingoo Han, Joseph Lo,
    Julia Lawall, Li Zhong, Mark Brown, Sascha Hauer, Stephen Boyd,
    Stratos Karafotis, and Viresh Kumar.

14) Fixes to prevent race conditions in coupled cpuidle from happening
    from Colin Cross.

15) cpuidle core fixes and cleanups from Daniel Lezcano and
    Tuukka Tikkanen.

16) Assorted cpuidle fixes and cleanups from Daniel Lezcano,
    Geert Uytterhoeven, Jingoo Han, Julia Lawall, Linus Walleij,
    and Sahara.

17) System sleep tracing changes from Todd E Brandt and Shuah Khan.

18) PNP subsystem conversion to using struct dev_pm_ops for power
    management from Shuah Khan.

* tag 'pm+acpi-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (217 commits)
  cpufreq: Don't use smp_processor_id() in preemptible context
  cpuidle: coupled: fix race condition between pokes and safe state
  cpuidle: coupled: abort idle if pokes are pending
  cpuidle: coupled: disable interrupts after entering safe state
  ACPI / hotplug: Remove containers synchronously
  driver core / ACPI: Avoid device hot remove locking issues
  cpufreq: governor: Fix typos in comments
  cpufreq: governors: Remove duplicate check of target freq in supported range
  cpufreq: Fix timer/workqueue corruption due to double queueing
  ACPI / EC: Add ASUSTEK L4R to quirk list in order to validate ECDT
  ACPI / thermal: Add check of "_TZD" availability and evaluating result
  cpufreq: imx6q: Fix clock enable balance
  ACPI: blacklist win8 OSI for buggy laptops
  cpufreq: tegra: fix the wrong clock name
  cpuidle: Change struct menu_device field types
  cpuidle: Add a comment warning about possible overflow
  cpuidle: Fix variable domains in get_typical_interval()
  cpuidle: Fix menu_device->intervals type
  cpuidle: CodingStyle: Break up multiple assignments on single line
  cpuidle: Check called function parameter in get_typical_interval()
  ...