Pull PCI updates from Bjorn Helgaas:

 - Remove unused lists from ASPM pcie_link_state (Frederick Lawler)

 - Fix Broadcom CNB20LE host bridge unintended sign extension (Colin Ian
   King)

 - Expand Kconfig "PF" acronyms (Randy Dunlap)

 - Update MAINTAINERS for arch/x86/kernel/early-quirks.c (Bjorn Helgaas)

 - Add missing include to drivers/pci.h (Alexandru Gagniuc)

 - Override Synopsys USB 3.x HAPS device class so dwc3-haps can claim it
   instead of xhci (Thinh Nguyen)

 - Clean up P2PDMA documentation (Randy Dunlap)

 - Allow runtime PM even if driver doesn't supply callbacks (Jarkko
   Nikula)

 - Remove status check after submitting Switchtec MRPC Firmware Download
   commands to avoid Completion Timeouts (Kelvin Cao)

 - Set Switchtec coherent DMA mask to allow 64-bit DMA (Boris Glimcher)

 - Fix Switchtec SWITCHTEC_IOCTL_EVENT_IDX_ALL flag overwrite issue
   (Joey Zhang)

 - Enable write combining for Switchtec MRPC Input buffers (Kelvin Cao)

 - Add Switchtec MRPC DMA mode support (Wesley Sheng)

 - Skip VF scanning on powerpc, which does this in firmware (Sebastian
   Ott)

 - Add Amlogic Meson PCIe controller driver and DT bindings (Yue Wang)

 - Constify histb dw_pcie_host_ops structure (Julia Lawall)

 - Support multiple power domains for imx6 (Leonard Crestez)

 - Constify layerscape driver data (Stefan Agner)

 - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho)

 - Support armada8k GPIO reset (Baruch Siach)

 - Support suspend/resume support on imx6 (Leonard Crestez)

 - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren)

 - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov)

 - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi)

 - Mask DesignWare interrupts instead of disabling them to avoid lost
   interrupts (Marc Zyngier)

 - Add locking when acking DesignWare interrupts (Marc Zyngier)

 - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier)

 - Use devm resource parser in mediatek (Honghui Zhang)

 - Remove unused mediatek "num-lanes" DT property (Honghui Zhang)

 - Add UniPhier PCIe controller driver and DT bindings (Kunihiko
   Hayashi)

 - Enable MSI for imx6 downstream components (Richard Zhu)

* tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (40 commits)
  PCI: imx: Enable MSI from downstream components
  s390/pci: skip VF scanning
  PCI/IOV: Add flag so platforms can skip VF scanning
  PCI/IOV: Factor out sriov_add_vfs()
  PCI: uniphier: Add UniPhier PCIe host controller support
  dt-bindings: PCI: Add UniPhier PCIe host controller description
  PCI: amlogic: Add the Amlogic Meson PCIe controller driver
  dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller
  arm64: dts: mt7622: Remove un-used property for PCIe
  arm: dts: mt7623: Remove un-used property for PCIe
  dt-bindings: PCI: MediaTek: Remove un-used property
  PCI: mediatek: Remove un-used variant in struct mtk_pcie_port
  MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry
  PCI: dwc: Don't hard-code DBI/ATU offset
  PCI: imx: Add imx6sx suspend/resume support
  PCI: armada8k: Add support for gpio controlled reset signal
  PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7
  PCI: dwc: layerscape: Constify driver data
  PCI: imx: Add multi-pd support
  PCI: Override Synopsys USB 3.x HAPS device class
  ...

  - Expand Kconfig "PF" acronyms (Randy Dunlap)

  - Update MAINTAINERS for arch/x86/kernel/early-quirks.c (Bjorn Helgaas)

  - Add missing include to drivers/pci.h (Alexandru Gagniuc)

  - Override Synopsys USB 3.x HAPS device class so dwc3-haps can claim it
    instead of xhci (Thinh Nguyen)

* pci/misc:
  PCI: Override Synopsys USB 3.x HAPS device class
  PCI: Move Synopsys HAPS platform device IDs
  PCI: Add missing include to drivers/pci.h
  PCI: Remove unnecessary space before function pointer arguments
  MAINTAINERS: Add x86 early-quirks.c file pattern to PCI subsystem
  PCI: Expand the "PF" acronym in Kconfig help text

ASPM does not make use of the children or link LIST_HEADs declared in
struct pcie_link_state and defined in alloc_pcie_link_state().  Therefore,
remove these lists.

No functional change intended.

Signed-off-by: Frederick Lawler <fred@fredlawl.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

ecae65e133f2 ("PCI/AER: Use kfifo_in_spinlocked() to insert locked
elements") replaced kfifo_put() with kfifo_in_spinlocked(), but passed the
*size* of the queue entry, where kfifo_in_spinlocked() expects the *number*
of entries to be copied.

We want to insert only one element into kfifo, not "sizeof(entry) = 16".
Without this patch, we would get 15 uninitialized elements.

Fixes: ecae65e133f2 ("PCI/AER: Use kfifo_in_spinlocked() to insert locked elements")
Signed-off-by: Yanjiang Jin <yanjiang.jin@hxt-semitech.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>

Make spacing more consistent in the code for function pointer declarations
based on checkpatch.pl.

Signed-off-by: Benjamin Young <youngcdev@gmail.com>
[bhelgaas: make similar changes in include/linux/pci.h]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

This reverts commit 17c91487364fb33797ed84022564ee7544ac4945.

Rafael found that this commit broke the SD card reader in his
Acer Aspire S5.  Details of the problem are in the bugzilla below.

Fixes: 17c91487364f ("PCI/ASPM: Do not initialize link state when aspm_disabled is set")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201801
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

  - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski)

  - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko)

  - Add switch fall-through annotations (Gustavo A. R. Silva)

  - Remove unused Switchtec quirk variable (Joshua Abraham)

  - Fix pci.c kernel-doc warning (Randy Dunlap)

  - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig)

  - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng)

  - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless
    dmesg errors (Logan Gunthorpe)

  - Update Switchtec NTB documentation (Wesley Yung)

  - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz)

* pci/misc:
  PCI: pcie: Remove redundant 'default n' from Kconfig
  NTB: switchtec_ntb: Update switchtec documentation with prerequisites for NTB
  PCI: Fix Switchtec DMA aliasing quirk dmesg noise
  PCI: Add macro for Switchtec quirk declarations
  PCI: Add Device IDs for Intel GPU "spurious interrupt" quirk
  PCI: Remove pci_set_dma_max_seg_size()
  PCI: Remove pci_set_dma_seg_boundary()
  PCI: Remove pci_unmap_addr() wrappers for DMA API
  PCI / ACPI: Mark expected switch fall-through
  PCI: Remove set but unused variable
  PCI: Fix pci.c kernel-doc parameter warning
  PCI: Allocate dma_alias_mask with bitmap_zalloc()
  PCI: Remove unused NFP32xx IDs

  - Differentiate between pciehp surprise and safe removal (Lukas Wunner)

  - Remove unnecessary pciehp includes (Lukas Wunner)

  - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner)

  - Tolerate PCIe Slot Presence Detect being hardwired to zero to
    workaround broken hardware, e.g., the Wilocity switch/wireless device
    (Lukas Wunner)

  - Unify pciehp controller & slot structs (Lukas Wunner)

  - Constify hotplug_slot_ops (Lukas Wunner)

  - Drop hotplug_slot_info (Lukas Wunner)

  - Embed hotplug_slot struct into users instead of allocating it
    separately (Lukas Wunner)

  - Initialize PCIe port service drivers directly instead of relying on
    initcall ordering (Keith Busch)

  - Restore PCI config state after a slot reset (Keith Busch)

  - Save/restore DPC config state along with other PCI config state (Keith
    Busch)

  - Reference count devices during AER handling to avoid race issue with
    concurrent hot removal (Keith Busch)

  - If an Upstream Port reports ERR_FATAL, don't try to read the Port's
    config space because it is probably unreachable (Keith Busch)

  - During error handling, use slot-specific reset instead of secondary
    bus reset to avoid link up/down issues on hotplug ports (Keith Busch)

  - Restore previous AER/DPC handling that does not remove and re-enumerate
    devices on ERR_FATAL (Keith Busch)

  - Notify all drivers that may be affected by error recovery resets (Keith
    Busch)

  - Always generate error recovery uevents, even if a driver doesn't have
    error callbacks (Keith Busch)

  - Make PCIe link active reporting detection generic (Keith Busch)

  - Support D3cold in PCIe hierarchies during system sleep and runtime,
    including hotplug and Thunderbolt ports (Mika Westerberg)

  - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots
    are empty or occupied (Jon Derrick)

  - Remove duplicated include from pci/pcie/err.c and unused variable from
    cpqphp (YueHaibing)

  - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza
    Pawandeep)

  - Uninline PCI bus accessors for better ftracing (Keith Busch)

  - Remove unused AER Root Port .error_resume method (Keith Busch)

  - Use kfifo in AER instead of a local version (Keith Busch)

  - Use threaded IRQ in AER bottom half (Keith Busch)

  - Use managed resources in AER core (Keith Busch)

  - Reuse pcie_port_find_device() for AER injection (Keith Busch)

  - Abstract AER interrupt handling to disconnect error injection (Keith
    Busch)

  - Refactor AER injection callbacks to simplify future improvments (Keith
    Busch)

* pci/hotplug:
  PCI/AER: Refactor error injection fallbacks
  PCI/AER: Abstract AER interrupt handling
  PCI/AER: Reuse existing pcie_port_find_device() interface
  PCI/AER: Use managed resource allocations
  PCI/AER: Use threaded IRQ for bottom half
  PCI/AER: Use kfifo_in_spinlocked() to insert locked elements
  PCI/AER: Use kfifo for tracking events instead of reimplementing it
  PCI/AER: Remove error source from AER struct aer_rpc
  PCI/AER: Remove unused aer_error_resume()
  PCI: Uninline PCI bus accessors for better ftracing
  PCI/AER: Remove pci_cleanup_aer_uncorrect_error_status() calls
  PCI: pnv_php: Use kmemdup()
  PCI: cpqphp: Remove set but not used variable 'physical_slot'
  PCI/ERR: Remove duplicated include from err.c
  PCI: Equalize hotplug memory and io for occupied and empty slots
  PCI / ACPI: Whitelist D3 for more PCIe hotplug ports
  ACPI / property: Allow multiple property compatible _DSD entries
  PCI/PME: Implement runtime PM callbacks
  PCI: pciehp: Implement runtime PM callbacks
  PCI/portdrv: Add runtime PM hooks for port service drivers
  PCI/portdrv: Resume upon exit from system suspend if left runtime suspended
  PCI: pciehp: Do not handle events if interrupts are masked
  PCI: pciehp: Disable hotplug interrupt during suspend
  PCI / ACPI: Enable wake automatically for power managed bridges
  PCI: Do not skip power-managed bridges in pci_enable_wake()
  PCI: Make link active reporting detection generic
  PCI: Unify device inaccessible
  PCI/ERR: Always report current recovery status for udev
  PCI/ERR: Simplify broadcast callouts
  PCI/ERR: Run error recovery callbacks for all affected devices
  PCI/ERR: Handle fatal error recovery
  PCI/ERR: Use slot reset if available
  PCI/AER: Don't read upstream ports below fatal errors
  PCI/AER: Take reference on error devices
  PCI/DPC: Save and restore config state
  PCI: portdrv: Restore PCI config state on slot reset
  PCI: portdrv: Initialize service drivers directly
  PCI: hotplug: Document TODOs
  PCI: hotplug: Embed hotplug_slot
  PCI: hotplug: Drop hotplug_slot_info
  PCI: hotplug: Constify hotplug_slot_ops
  PCI: pciehp: Reshuffle controller struct for clarity
  PCI: pciehp: Rename controller struct members for clarity
  PCI: pciehp: Unify controller and slot structs
  PCI: pciehp: Tolerate Presence Detect hardwired to zero
  PCI: pciehp: Drop hotplug_slot_ops wrappers
  PCI: pciehp: Drop unnecessary includes
  PCI: pciehp: Differentiate between surprise and safe removal
  PCI: Simplify disconnected marking

Move the bus ops fallback into separate functions.  No functional change
here.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

The aer_inject module was directly calling aer_irq().  This required the
AER driver export its private IRQ handler for no other reason than to
support error injection.  A driver should not have to expose its private
interfaces, so use the IRQ subsystem to route injection to the AER driver,
and make aer_irq() a private interface.

This provides additional benefits:

First, directly calling the IRQ handler bypassed the IRQ subsytem so the
injection wasn't really synthesizing what happens if a shared AER interrupt
occurs.

The error injection had to provide the callback data directly, which may be
racing with a removal that is freeing that structure.  The IRQ subsystem
can handle that race.

Finally, using the IRQ subsystem automatically reacts to threaded IRQs,
keeping the error injection abstracted from that implementation detail.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>