- Drop endpoint redundant masking of global IRQ events (Manivannan Sadhasivam) - Clarify unknown global IRQ message and only log it once to avoid a flood (Manivannan Sadhasivam) - Add Manivannan Sadhasivam as maintainer of qcom endpoint driver (Manivannan Sadhasivam) - Add 'linux,pci-domain' property to endpoint DT binding (Manivannan Sadhasivam) - Assign PCI domain number for endpoint controllers (Manivannan Sadhasivam) - Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for endpoint controller (Manivannan Sadhasivam) - Add global SPI interrupt for PCIe link events to DT binding (Manivannan Sadhasivam) - Add global RC interrupt handler to handle 'Link up' events and automatically enumerate hot-added devices (Manivannan Sadhasivam) - Avoid mirroring of DBI and iATU register space so it doesn't overlap BAR MMIO space (Prudhvi Yarlagadda) - Enable controller resources like PHY only after PERST# is deasserted to partially avoid the problem that the endpoint SoC crashes when accessing things when Refclk is absent (Manivannan Sadhasivam) - Rename dw_pcie.link_gen to max_link_speed to avoid ambiguity (Manivannan Sadhasivam) - Cache maximum link speed value in dw_pcie.max_link_speed for use by vendor drivers (Manivannan Sadhasivam) - Add 16.0 GT/s equalization and RX lane margining settings (Shashank Babu Chinta Venkata) - Pass domain number to pci_bus_release_domain_nr() explicitly to avoid a NULL pointer dereference (Manivannan Sadhasivam) * pci/controller/qcom: PCI: Pass domain number to pci_bus_release_domain_nr() explicitly PCI: qcom: Add RX lane margining settings for 16.0 GT/s PCI: qcom: Add equalization settings for 16.0 GT/s PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed' PCI: qcom-ep: Enable controller resources like PHY only after refclk is available PCI: qcom: Disable mirroring of DBI and iATU register space in BAR region PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt dt-bindings: PCI: qcom,pcie-sm8450: Add 'global' interrupt PCI: qcom-ep: Modify 'global_irq' and 'perst_irq' IRQ device names PCI: endpoint: Assign PCI domain number for endpoint controllers dt-bindings: PCI: pci-ep: Document 'linux,pci-domain' property dt-bindings: PCI: pci-ep: Update Maintainers PCI: qcom-ep: Reword the error message for receiving unknown global IRQ event PCI: qcom-ep: Drop the redundant masking of global IRQ events
- Initialize leds class earlier (with an unfortunate Makefile ordering change) so the PCI NPEM driver can use it (Mariusz Tkaczyk) - Add Native PCIe Enclosure Management (NPEM) support for sysfs control of NVMe RAID storage indicators (ok/fail/locate/rebuild/etc) (Mariusz Tkaczyk) - Add support for the ACPI _DSM PCIe SSD status LED management, which is functionally similar to NPEM but mediated by platform firmware (Mariusz Tkaczyk) * pci/npem: PCI/NPEM: Add _DSM PCIe SSD status LED management PCI/NPEM: Add Native PCIe Enclosure Management support leds: Init leds class earlier
The pci_bus_release_domain_nr() API is supposed to free the domain
number allocated by pci_bus_find_domain_nr(). Most of the callers of
pci_bus_find_domain_nr(), store the domain number in pci_bus::domain_nr.
As such, the pci_bus_release_domain_nr() implicitly frees the domain
number by dereferencing 'struct pci_bus'. However, one of the callers
of this API, the PCI endpoint subsystem, doesn't have 'struct pci_bus',
so it only passes NULL. Due to this, the API will end up dereferencing
the NULL pointer.
To fix this issue, pass the domain number to this API explicitly. Since
'struct pci_bus' is not used for anything else other than extracting the
domain number, it makes sense to pass the domain number directly.
Fixes: 0328947c5032 ("PCI: endpoint: Assign PCI domain number for endpoint controllers")
Closes: https://lore.kernel.org/linux-pci/c0c40ddb-bf64-4b22-9dd1-8dbb18aa2813@stanley.mountain
Link: https://lore.kernel.org/linux-pci/20240912053025.25314-1-manivannan.sadhasivam@linaro.org
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
PCIe r6.0 changed the abbreviation for "Configuration Request Retry Status" Completion Status from "CRS" to "RRS" and uses the terminology of "Configuration RRS Software Visibility" instead of "CRS Software Visibility". Align the Linux usage with the r6.0 spec language. No functional change intended. It's confusing to make this change, but I think "RRS" *is* a better abbreviation because it was easy to interpret "CRS" as "Completion Retry Status", which really didn't make any sense. Link: https://lore.kernel.org/r/20240827234848.4429-4-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
After a device reset, delays are required before the device can successfully complete config accesses. PCIe r6.0, sec 6.6, specifies some delays required before software can perform config accesses. Devices that require more time after those delays may respond to config accesses with Configuration Request Retry Status (RRS) completions. Callers of pci_dev_wait() are responsible for delays until the device can respond to config accesses. pci_dev_wait() waits any additional time until the device can successfully complete config accesses. Reading config space of devices that are not present or not ready typically returns ~0 (PCI_ERROR_RESPONSE). Previously we polled the Command register until we got a value other than ~0. This is sometimes a problem because Root Complex handling of RRS completions may include several retries and implementation-specific behavior that is invisible to software (see sec 2.3.2), so the exponential backoff in pci_dev_wait() may not work as intended. Linux enables Configuration RRS Software Visibility on all Root Ports that support it. If it is enabled, read the Vendor ID instead of the Command register. RRS completions cause immediate return of the 0x0001 reserved Vendor ID value, so the pci_dev_wait() backoff works correctly. When a read of Vendor ID eventually completes successfully by returning a non-0x0001 value (the Vendor ID or 0xffff for VFs), the device should be initialized and ready to respond to config requests. For conventional PCI devices or devices below Root Ports that don't support Configuration RRS Software Visibility, poll the Command register as before. This was developed independently, but is very similar to Stanislav Spassov's previous work at https://lore.kernel.org/linux-pci/20200223122057.6504-1-stanspas@amazon.com Link: https://lore.kernel.org/r/20240827234848.4429-2-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Duc Dang <ducdang@google.com>
Native PCIe Enclosure Management (NPEM, PCIe r6.1 sec 6.28) allows managing LEDs in storage enclosures. NPEM is indication oriented and it does not give direct access to LEDs. Although each indication *could* represent an individual LED, multiple indications could also be represented as a single, multi-color LED or a single LED blinking in a specific interval. The specification leaves that open. Each enabled indication (capability register bit on) is represented as a ledclass_dev which can be controlled through sysfs. For every ledclass device only 2 brightness states are allowed: LED_ON (1) or LED_OFF (0). This corresponds to the NPEM control register (Indication bit on/off). Ledclass devices appear in sysfs as child devices (subdirectory) of PCI device which has an NPEM Extended Capability and indication is enabled in NPEM capability register. For example, these are LEDs created for pcieport "10000:02:05.0" on my setup: leds/ ├── 10000:02:05.0:enclosure:fail ├── 10000:02:05.0:enclosure:locate ├── 10000:02:05.0:enclosure:ok └── 10000:02:05.0:enclosure:rebuild They can be also found in "/sys/class/leds" directory. The parent PCIe device domain/bus/device/function address is used to guarantee uniqueness across leds subsystem. To enable/disable a "fail" indication, the "brightness" file can be edited: echo 1 > ./leds/10000:02:05.0:enclosure:fail/brightness echo 0 > ./leds/10000:02:05.0:enclosure:fail/brightness PCIe r6.1, sec 7.9.19.2 defines the possible indications. Multiple indications for same parent PCIe device can conflict and hardware may update them when processing new request. To avoid issues, driver refresh all indications by reading back control register. This driver expects to be the exclusive NPEM extended capability manager. It waits up to 1 second after imposing new request, it doesn't verify if controller is busy before write, and it assumes the mutex lock gives protection from concurrent updates. If _DSM LED management is available, we assume the platform may be using NPEM for its own purposes (see PCI Firmware Spec r3.3 sec 4.7), so the driver does not use NPEM. A future patch will add _DSM support; an info message notes whether NPEM or _DSM is being used. NPEM is a PCIe extended capability so it should be registered in pcie_init_capabilities() but it is not possible due to LED dependency. The parent pci_device must be added earlier for led_classdev_register() to be successful. NPEM does not require configuration on kernel side, so it is safe to register LED devices later. Link: https://lore.kernel.org/r/20240904104848.23480-3-mariusz.tkaczyk@linux.intel.com Suggested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Stuart Hayes <stuart.w.hayes@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Define PCIE_RESET_CONFIG_DEVICE_WAIT_MS for the generic 100ms
required after reset before config access (Kevin Xie)
- Define PCIE_T_RRS_READY_MS for the generic 100ms required after
reset before config access (probably should be unified with
PCIE_RESET_CONFIG_DEVICE_WAIT_MS) (Damien Le Moal)
Resource management:
- Rename find_resource() to find_resource_space() to be more
descriptive (Ilpo Järvinen)
- Export find_resource_space() for use by PCI core, which needs to
learn whether there is available space for a bridge window (Ilpo
Järvinen)
- Prevent double counting of resources so window size doesn't grow on
each remove/rescan cycle (Ilpo Järvinen)
- Relax bridge window sizing algorithm so a device doesn't break
simply because it was removed and rescanned (Ilpo Järvinen)
- Evaluate the ACPI PRESERVE_BOOT_CONFIG _DSM in
pci_register_host_bridge() (not acpi_pci_root_create()) so we can
unify it with similar DT functionality (Vidya Sagar)
- Extend use of DT "linux,pci-probe-only" property so it works
per-host bridge as well as globally (Vidya Sagar)
- Unify support for ACPI PRESERVE_BOOT_CONFIG _DSM and the DT
"linux,pci-probe-only" property in pci_preserve_config() (Vidya
Sagar)
Driver binding:
- Add devres infrastructure for managed request and map of partial
BAR resources (Philipp Stanner)
- Deprecate pcim_iomap_table() because uses like
"pcim_iomap_table()[0]" have no good way to return errors (Philipp
Stanner)
- Add an always-managed pcim_request_region() for use instead of
pci_request_region() and similar, which are sometimes managed
depending on whether pcim_enable_device() has been called
previously (Philipp Stanner)
- Reimplement pcim_set_mwi() so it doesn't need to keep store MWI
state (Philipp Stanner)
- Add pcim_intx() for use instead of pci_intx(), which is sometimes
managed depending on whether pcim_enable_device() has been called
previously (Philipp Stanner)
- Add managed pcim_iomap_range() to allow mapping of a partial BAR
(Philipp Stanner)
- Fix a devres mapping leak in drm/vboxvideo (Philipp Stanner)
Error handling:
- Add missing bridge locking in device reset path and add a warning
for other possible lock issues (Dan Williams)
- Fix use-after-free on concurrent DPC and hot-removal (Lukas Wunner)
Power management:
- Disable AER and DPC during suspend to avoid spurious wakeups if
they share an interrupt with PME (Kai-Heng Feng)
PCIe native device hotplug:
- Detect if a device was removed or replaced during system sleep so
we don't assume a new device is the one that used to be there
(Lukas Wunner)
Virtualization:
- Add an ACS quirk for Broadcom BCM5760X multi-function NIC; it
prevents transactions between functions even though it doesn't
advertise ACS, so the functions can be attached individually via
VFIO (Ajit Khaparde)
Peer-to-peer DMA:
- Add a "pci=config_acs=" kernel command-line parameter to relax
default ACS settings to enable additional peer-to-peer
configurations. Requires expert knowledge of topology and ACS
operation (Vidya Sagar)
Endpoint framework:
- Remove unused struct pci_epf_group.type_group (Christophe JAILLET)
- Fix error handling in vpci_scan_bus() and epf_ntb_epc_cleanup()
(Dan Carpenter)
- Make struct pci_epc_class constant (Greg Kroah-Hartman)
- Remove unused pci_endpoint_test_bar_{readl,writel} functions
(Jiapeng Chong)
- Rename "BME" to "Bus Master Enable" (Manivannan Sadhasivam)
- Rename struct pci_epc_event_ops.core_init() callback to epc_init()
(Manivannan Sadhasivam)
- Move DMA init to MHI .epc_init() callback for uniformity
(Manivannan Sadhasivam)
- Cancel EPF test delayed work when link goes down (Manivannan
Sadhasivam)
- Add struct pci_epc_event_ops.epc_deinit() callback for cleanup
needed on fundamental reset (Manivannan Sadhasivam)
- Add 64KB alignment to endpoint test to support Rockchip rk3588
(Niklas Cassel)
- Optimize endpoint test by using memcpy() instead of readl() (Niklas
Cassel)
Device tree bindings:
- Add generic "ats-supported" property to advertise that a PCIe Root
Complex supports ATS (Jean-Philippe Brucker)
Amazon Annapurna Labs PCIe controller driver:
- Validate IORESOURCE_BUS presence to avoid NULL pointer dereference
(Aleksandr Mishin)
Axis ARTPEC-6 PCIe controller driver:
- Rename .cpu_addr_fixup() parameter to reflect that it is a PCI
address, not a CPU address (Niklas Cassel)
Freescale i.MX6 PCIe controller driver:
- Convert to agnostic GPIO API (Andy Shevchenko)
Freescale Layerscape PCIe controller driver:
- Make struct mobiveil_rp_ops constant (Christophe JAILLET)
- Use new generic dw_pcie_ep_linkdown() to handle link-down events
(Manivannan Sadhasivam)
HiSilicon Kirin PCIe controller driver:
- Convert to agnostic GPIO API (Andy Shevchenko)
- Use _scoped() iterator for OF children to ensure refcounts are
decremented at loop exit (Javier Carrasco)
Intel VMD host bridge driver:
- Create sysfs "domain" symlink before downstream devices are exposed
to userspace by pci_bus_add_devices() (Jiwei Sun)
Loongson PCIe controller driver:
- Enable MSI when LS7A is used with new CPUs that have integrated
PCIe Root Complex, e.g., Loongson-3C6000, so downstream devices can
use MSI (Huacai Chen)
Microchip AXI PolarFlare PCIe controller driver:
- Move pcie-microchip-host.c to a new PLDA directory (Minda Chen)
- Factor PLDA generic items out to a common
plda,xpressrich3-axi-common.yaml binding (Minda Chen)
- Factor PLDA generic data structures and code out to shared
pcie-plda.h, pcie-plda-host.c (Minda Chen)
- Add PLDA generic interrupt handling with a .request_event_irq()
callback for vendor-specific events (Minda Chen)
- Add PLDA generic host init/deinit and map bus functions for use by
vendor-specific drivers (Minda Chen)
- Rework to use PLDA core (Minda Chen)
Microsoft Hyper-V host bridge driver:
- Return zero, not garbage, when reading PCI_INTERRUPT_PIN (Wei Liu)
NVIDIA Tegra194 PCIe controller driver:
- Remove unused struct tegra_pcie_soc (Dr. David Alan Gilbert)
- Set 64KB inbound ATU alignment restriction (Jon Hunter)
Qualcomm PCIe controller driver:
- Make the MHI reg region mandatory for X1E80100, since all PCIe
controllers have it (Abel Vesa)
- Prevent use of uninitialized data and possible error pointer
dereference (Dan Carpenter)
- Return error, not success, if dev_pm_opp_find_freq_floor() fails
(Dan Carpenter)
- Add Operating Performance Points (OPP) support to scale performance
state based on aggregate link bandwidth to improve SoC power
efficiency (Krishna chaitanya chundru)
- Vote for the CPU-PCIe ICC (interconnect) path to ensure it stays
active even if other drivers don't vote for it (Krishna chaitanya
chundru)
- Use devm_clk_bulk_get_all() to get all the clocks from DT to avoid
writing out all the clock names (Manivannan Sadhasivam)
- Add DT binding and driver support for the SA8775P SoC (Mrinmay
Sarkar)
- Add HDMA support for the SA8775P SoC (Mrinmay Sarkar)
- Override the SA8775P NO_SNOOP default to avoid possible memory
corruption (Mrinmay Sarkar)
- Make sure resources are disabled during PERST# assertion, even if
the link is already disabled (Manivannan Sadhasivam)
- Use new generic dw_pcie_ep_linkdown() to handle link-down events
(Manivannan Sadhasivam)
- Add DT and endpoint driver support for the SA8775P SoC (Mrinmay
Sarkar)
- Add Hyper DMA (HDMA) support for the SA8775P SoC and enable it in
the EPF MHI driver (Mrinmay Sarkar)
- Set PCIE_PARF_NO_SNOOP_OVERIDE to override the default NO_SNOOP
attribute on the SA8775P SoC (both Root Complex and Endpoint mode)
to avoid possible memory corruption (Mrinmay Sarkar)
Renesas R-Car PCIe controller driver:
- Demote WARN() to dev_warn_ratelimited() in rcar_pcie_wakeup() to
avoid unnecessary backtrace (Marek Vasut)
- Add DT and driver support for R-Car V4H (R8A779G0) host and
endpoint. This requires separate proprietary firmware (Yoshihiro
Shimoda)
Rockchip PCIe controller driver:
- Assert PERST# for 100ms after power is stable (Damien Le Moal)
- Wait PCIE_T_RRS_READY_MS (100ms) after reset before starting
configuration (Damien Le Moal)
- Use GPIOD_OUT_LOW flag while requesting ep_gpio to fix a firmware
crash on Qcom-based modems with Rockpro64 board (Manivannan
Sadhasivam)
Rockchip DesignWare PCIe controller driver:
- Factor common parts of rockchip-dw-pcie DT binding to be shared by
Root Complex and Endpoint mode (Niklas Cassel)
- Add missing INTx signals to common DT binding (Niklas Cassel)
- Add eDMA items to DT binding for Endpoint controller (Niklas
Cassel)
- Fix initial dw-rockchip PERST# GPIO value to prevent unnecessary
short assert/deassert that causes issues with some WLAN controllers
(Niklas Cassel)
- Refactor dw-rockchip and add support for Endpoint mode (Niklas
Cassel)
- Call pci_epc_init_notify() and drop dw_pcie_ep_init_notify()
wrapper (Niklas Cassel)
- Add error messages in .probe() error paths to improve user
experience (Uwe Kleine-König)
Samsung Exynos PCIe controller driver:
- Use bulk clock APIs to simplify clock setup (Shradha Todi)
StarFive PCIe controller driver:
- Add DT binding and driver support for the StarFive JH7110
PLDA-based PCIe controller (Minda Chen)
Synopsys DesignWare PCIe controller driver:
- Add generic support for sending PME_Turn_Off when system suspends
(Frank Li)
- Fix incorrect interpretation of iATU slot 0 after PERST#
assert/deassert (Frank Li)
- Use msleep() instead of usleep_range() while waiting for link
(Konrad Dybcio)
- Refactor dw_pcie_edma_find_chip() to enable adding support for
Hyper DMA (HDMA) (Manivannan Sadhasivam)
- Enable drivers to supply the eDMA channel count since some can't
auto detect this (Manivannan Sadhasivam)
- Call pci_epc_init_notify() and drop dw_pcie_ep_init_notify()
wrapper (Manivannan Sadhasivam)
- Pass the eDMA mapping format directly from drivers instead of
maintaining a capability for it (Manivannan Sadhasivam)
- Add generic dw_pcie_ep_linkdown() to notify EPF drivers about
link-down events and restore non-sticky DWC registers lost on link
down (Manivannan Sadhasivam)
- Add vendor-specific "apb" reg name, interrupt names, INTx names to
generic binding (Niklas Cassel)
- Enforce DWC restriction that 64-bit BARs must start with an
even-numbered BAR (Niklas Cassel)
- Consolidate args of dw_pcie_prog_outbound_atu() into a structure
(Yoshihiro Shimoda)
- Add support for endpoints to send Message TLPs, e.g., for INTx
emulation (Yoshihiro Shimoda)
TI DRA7xx PCIe controller driver:
- Rename .cpu_addr_fixup() parameter to reflect that it is a PCI
address, not a CPU address (Niklas Cassel)
TI Keystone PCIe controller driver:
- Validate IORESOURCE_BUS presence to avoid NULL pointer dereference
(Aleksandr Mishin)
- Work around AM65x/DRA80xM Errata #i2037 that corrupts TLPs and
causes processor hangs by limiting Max_Read_Request_Size (MRRS) and
Max_Payload_Size (MPS) (Kishon Vijay Abraham I)
- Leave BAR 0 disabled for AM654x to fix a regression caused by
6ab15b5e7057 ("PCI: dwc: keystone: Convert .scan_bus() callback to
use add_bus"), which caused a 45-second boot delay (Siddharth
Vadapalli)
Xilinx Versal CPM PCIe controller driver:
- Fix overlapping bridge registers and 32-bit BAR addresses in DT
binding (Thippeswamy Havalige)
MicroSemi Switchtec management driver:
- Make struct switchtec_class constant (Greg Kroah-Hartman)
Miscellaneous:
- Remove unused struct acpi_handle_node (Dr. David Alan Gilbert)
- Add missing MODULE_DESCRIPTION() macros (Jeff Johnson)"
* tag 'pci-v6.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (154 commits)
PCI: loongson: Enable MSI in LS7A Root Complex
PCI: Extend ACS configurability
PCI: Add missing bridge lock to pci_bus_lock()
drm/vboxvideo: fix mapping leaks
PCI: Add managed pcim_iomap_range()
PCI: Remove legacy pcim_release()
PCI: Add managed pcim_intx()
PCI: vmd: Create domain symlink before pci_bus_add_devices()
PCI: qcom: Prevent use of uninitialized data in qcom_pcie_suspend_noirq()
PCI: qcom: Prevent potential error pointer dereference
PCI: qcom: Fix missing error code in qcom_pcie_probe()
PCI: Give pcim_set_mwi() its own devres cleanup callback
PCI: Move struct pci_devres.pinned bit to struct pci_dev
PCI: Remove struct pci_devres.enabled status bit
PCI: Document hybrid devres hazards
PCI: Add managed pcim_request_region()
PCI: Deprecate pcim_iomap_table(), pcim_iomap_regions_request_all()
PCI: Add managed partial-BAR request and map infrastructure
PCI: Add devres helpers for iomap table
PCI: Add and use devres helper for bit masks
...
With the introduction of PCI device power control drivers that will be able to trigger the port rescan when probing, we need to hold the rescan mutex during the initial pci_host_probe() too or the two could get in each other's way. Tested-by: Amit Pundir <amit.pundir@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD, SM8650-QRD & SM8650-HDK Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 8T Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20240612082019.19161-2-brgl@bgdev.pl Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
While the experiment did reveal that there are additional places that are
missing the lock during secondary bus reset, one of the places that needs
to take cfg_access_lock (pci_bus_lock()) is not prepared for lockdep
annotation.
Specifically, pci_bus_lock() takes pci_dev_lock() recursively and is
currently dependent on the fact that the device_lock() is marked
lockdep_set_novalidate_class(&dev->mutex). Otherwise, without that
annotation, pci_bus_lock() would need to use something like a new
pci_dev_lock_nested() helper, a scheme to track a PCI device's depth in the
topology, and a hope that the depth of a PCI tree never exceeds the max
value for a lockdep subclass.
The alternative to ripping out the lockdep coverage would be to deploy a
dynamic lock key for every PCI device. Unfortunately, there is evidence
that increasing the number of keys that lockdep needs to track to be
per-PCI-device is prohibitively expensive for something like the
cfg_access_lock.
The main motivation for adding the annotation in the first place was to
catch unlocked secondary bus resets, not necessarily catch lock ordering
problems between cfg_access_lock and other locks. Solve that narrower
problem with follow-on patches, and just due to targeted revert for now.
Link: https://lore.kernel.org/r/171711746402.1628941.14575335981264103013.stgit@dwillia2-xfh.jf.intel.com
Fixes: 7e89efc6e9e4 ("PCI: Lock upstream bridge for pci_reset_function()")
Reported-by: Imre Deak <imre.deak@intel.com>
Closes: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_134186v1/shard-dg2-1/igt@device_reset@unbind-reset-rebind.html
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Kalle Valo <kvalo@kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Use preserve_config in place of checking for PCI_PROBE_ONLY flag to enable support for "linux,pci-probe-only" on a per host bridge basis. This also obviates the use of adding PCI_REASSIGN_ALL_BUS flag if !PCI_PROBE_ONLY, as pci_assign_unassigned_root_bus_resources() takes care of reassigning the resources that are not already claimed. Link: https://lore.kernel.org/r/20240508174138.3630283-5-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>