linux-toradex.git/drivers/pci/remove.c, branch v3.9

Merge tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2013-02-26T05:18:18+00:00

Pull PCI changes from Bjorn Helgaas:
 "Host bridge hotplug
    - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu)
    - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu)
    - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu)
    - Stop caching _PRT and make independent of bus numbers (Yinghai Lu)

  PCI device hotplug
    - Clean up cpqphp dead code (Sasha Levin)
    - Disable ARI unless device and upstream bridge support it (Yijing Wang)
    - Initialize all hot-added devices (not functions 0-7) (Yijing Wang)

  Power management
    - Don't touch ASPM if disabled (Joe Lawrence)
    - Fix ASPM link state management (Myron Stowe)

  Miscellaneous
    - Fix PCI_EXP_FLAGS accessor (Alex Williamson)
    - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov)
    - Document hotplug resource and MPS parameters (Yijing Wang)
    - Add accessor for PCIe capabilities (Myron Stowe)
    - Drop pciehp suspend/resume messages (Paul Bolle)
    - Make pci_slot built-in only (not a module) (Jiang Liu)
    - Remove unused PCI/ACPI bind ops (Jiang Liu)
    - Removed used pci_root_bus (Bjorn Helgaas)"

* tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits)
  PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers
  PCI: Fix PCI Express Capability accessors for PCI_EXP_FLAGS
  ACPI / PCI: Make pci_slot built-in only, not a module
  PCI/PM: Clear state_saved during suspend
  PCI: Use atomic_inc_return() rather than atomic_add_return()
  PCI: Catch attempts to disable already-disabled devices
  PCI: Disable Bus Master unconditionally in pci_device_shutdown()
  PCI: acpiphp: Remove dead code for PCI host bridge hotplug
  PCI: acpiphp: Create companion ACPI devices before creating PCI devices
  PCI: Remove unused "rc" in virtfn_add_bus()
  PCI: pciehp: Drop suspend/resume ENTRY messages
  PCI/ASPM: Don't touch ASPM if forcibly disabled
  PCI/ASPM: Deallocate upstream link state even if device is not PCIe
  PCI: Document MPS parameters pci=pcie_bus_safe, pci=pcie_bus_perf, etc
  PCI: Document hpiosize= and hpmemsize= resource reservation parameters
  PCI: Use PCI Express Capability accessor
  PCI: Introduce accessor to retrieve PCIe Capabilities Register
  PCI: Put pci_dev in device tree as early as possible
  PCI: Skip attaching driver in device_add()
  PCI: acpiphp: Keep driver loaded even if no slots found
  ...

PCI/PM: Clean up PME state when removing a device

2013-02-13T18:58:02+00:00

Devices are added to pci_pme_list when drivers use pci_enable_wake()
or pci_wake_from_d3(), but they aren't removed from the list unless
the driver explicitly disables wakeup.  Many drivers never disable
wakeup, so their devices remain on the list even after they are
removed, e.g., via hotplug.  A subsequent PME poll will oops when
it tries to touch the device.

This patch disables PME# on a device before removing it, which removes
the device from pci_pme_list.  This is safe even if the device never
had PME# enabled.

This oops can be triggered by unplugging a Thunderbolt ethernet adapter
on a Macbook Pro, as reported by Daniel below.

[bhelgaas: changelog]
Reference: http://lkml.kernel.org/r/CAMVG2svG21yiM1wkH4_2pen2n+cr2-Zv7TbH3Gj+8MwevZjDbw@mail.gmail.com
Reported-and-tested-by: Daniel J Blueman 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Bjorn Helgaas 
CC: stable@vger.kernel.org

PCI: Make device create/destroy logic symmetric

2013-01-25T21:42:06+00:00

According to device model documentation, the way to create/destroy PCI
devices should be symmetric.  The rule is to either use
  1) device_register()/device_unregister()
or
  2) device_initialize()/device_add()/device_del()/put_device().

So change PCI core logic to follow the rule and get rid of the redundant
pci_dev_get()/pci_dev_put() pair.

Signed-off-by: Jiang Liu 
Signed-off-by: Yinghai Lu 
Signed-off-by: Bjorn Helgaas 
Acked-by: Rafael J. Wysocki

PCI: Add pci_stop_and_remove_root_bus()

2012-11-03T22:26:37+00:00

It supports both PCI root bus and PCI bus under PCI bridge.

Signed-off-by: Yinghai Lu 
Signed-off-by: Bjorn Helgaas

PCI: Stop all children first, before removing all children

2012-09-20T23:37:23+00:00

This restores the previous behavior of stopping all child devices before
removing any of them.  The current SR-IOV design, where removing the PF
also drops references on all the VFs, depends on having the VFs continue
to exist after having been stopped.

[bhelgaas: changelog]
Signed-off-by: Yinghai Lu 
Signed-off-by: Bjorn Helgaas

PCI: Leave normal LIST_POISON in deleted list entries

2012-08-22T17:34:38+00:00

list_del() already sets next/prev to LIST_POISON1/LIST_POISON2, so we
don't need to do anything special here to prevent further list accesses.

Tested-by: Yijing Wang 
Signed-off-by: Bjorn Helgaas 
Acked-by: Yinghai Lu

PCI: Rename local variables to conventional names

2012-08-22T17:34:38+00:00

"bus" is the conventional name for a "struct pci_bus *" variable.

Tested-by: Yijing Wang 
Signed-off-by: Bjorn Helgaas 
Acked-by: Yinghai Lu

PCI: Remove unused, commented-out, code

2012-08-22T17:31:53+00:00

This removes unused code that was already commented out.

Tested-by: Yijing Wang 
Signed-off-by: Bjorn Helgaas 
Acked-by: Yinghai Lu

PCI: Stop and remove devices in one pass

2012-08-22T17:31:48+00:00

Previously, when we removed a PCI device, we made two passes over the
hierarchy rooted at the device.  In the first pass, we stopped all
the devices, and in the second, we removed them.

This patch combines the two passes into one so that we remove a device as
soon as it and all its children have been stopped.

Note that we previously stopped devices in reverse order and removed them
in forward order.  Now we stop and remove them in reverse order.

Tested-by: Yijing Wang 
Signed-off-by: Bjorn Helgaas 
Acked-by: Yinghai Lu

PCI: Fold stop and remove helpers into their callers

2012-08-22T17:31:42+00:00

pci_stop_bus_devices() is only two lines of code and is only called by
pci_stop_bus_device(), so I think it's easier to read if we just fold it
into the caller.  Similarly for __pci_remove_behind_bridge().

Tested-by: Yijing Wang 
Signed-off-by: Bjorn Helgaas 
Acked-by: Yinghai Lu