linux-toradex.git/drivers/pci, branch v2.6.32.31

PCI: pci-stub: ignore zero-length id parameters

2011-02-17T23:37:01+00:00

commit 99a0fadf561e1f553c08f0a29f8b2578f55dd5f0 upstream.

pci-stub uses strsep() to separate list of ids and generates a warning
message when it fails to parse an id.  However, not specifying the
parameter results in ids set to an empty string.  strsep() happily
returns the empty string as the first token and thus triggers the
warning message spuriously.

Make the tokner ignore zero length ids.

Reported-by: Chris Wright 
Reported-by: Prasad Joshi 
Signed-off-by: Jesse Barnes 
Signed-off-by: Greg Kroah-Hartman

x86, vt-d: Quirk for masking vtd spec errors to platform error handling logic

2011-01-07T22:43:12+00:00

commit 254e42006c893f45bca48f313536fcba12206418 upstream.

On platforms with Intel 7500 chipset, there were some reports of system
hang/NMI's during kexec/kdump in the presence of interrupt-remapping enabled.

During kdump, there is a window where the devices might be still using old
kernel's interrupt information, while the kdump kernel is coming up. This can
cause vt-d faults as the interrupt configuration from the old kernel map to
null IRTE entries in the new kernel etc. (with out interrupt-remapping enabled,
we still have the same issue but in this case we will see benign spurious
interrupt hit the new kernel).

Based on platform config settings, these platforms seem to generate NMI/SMI
when a vt-d fault happens and there were reports that the resulting SMI causes
the  system to hang.

Fix it by masking vt-d spec defined errors to platform error reporting logic.
VT-d spec related errors are already handled by the VT-d OS code, so need to
report the same error through other channels.

Signed-off-by: Suresh Siddha 
LKML-Reference: <1291667190.2675.8.camel@sbsiddha-MOBL3.sc.intel.com>
Reported-by: Max Asbock 
Reported-and-tested-by: Takao Indoh 
Acked-by: Chris Wright 
Acked-by: Kenji Kaneshige 
Signed-off-by: H. Peter Anvin 
Signed-off-by: Greg Kroah-Hartman

x86, vt-d: Handle previous faults after enabling fault handling

2011-01-07T22:43:11+00:00

commit 7f99d946e71e71d484b7543b49e990508e70d0c0 upstream.

Fault handling is getting enabled after enabling the interrupt-remapping (as
the success of interrupt-remapping can affect the apic mode and hence the
fault handling mode).

Hence there can potentially be some faults between the window of enabling
interrupt-remapping in the vt-d and the fault-handling of the vt-d units.

Handle any previous faults after enabling the vt-d fault handling.

For v2.6.38 cleanup, need to check if we can remove the dmar_fault() in the
enable_intr_remapping() and see if we can enable fault handling along with
enabling intr-remapping.

Signed-off-by: Suresh Siddha 
LKML-Reference: <20101201062244.630417138@intel.com>
Acked-by: Chris Wright 
Signed-off-by: H. Peter Anvin 
Signed-off-by: Greg Kroah-Hartman

PCI: fix offset check for sysfs mmapped files

2010-12-09T21:26:53+00:00

commit 8c05cd08a7504b855c265263e84af61aabafa329 upstream.

I just loaded 2.6.37-rc2 on my machines, and I noticed that X no longer starts.
Running an strace of the X server shows that it's doing this:

open("/sys/bus/pci/devices/0000:07:00.0/resource0", O_RDWR) = 10
mmap(NULL, 16777216, PROT_READ|PROT_WRITE, MAP_SHARED, 10, 0) = -1 EINVAL (Invalid argument)

This code seems to be asking for a shared read/write mapping of 16MB worth of
BAR0 starting at file offset 0, and letting the kernel assign a starting
address.  Unfortunately, this -EINVAL causes X not to start.  Looking into
dmesg, there's a complaint like so:

process "Xorg" tried to map 0x01000000 bytes at page 0x00000000 on 0000:07:00.0 BAR 0 (start 0x        96000000, size 0x         1000000)

...with the following code in pci_mmap_fits:

	pci_start = (mmap_api == PCI_MMAP_SYSFS) ?
		pci_resource_start(pdev, resno) >> PAGE_SHIFT : 0;
        if (start >= pci_start && start < pci_start + size &&
                        start + nr <= pci_start + size)

It looks like the logic here is set up such that when the mmap call comes via
sysfs, the check in pci_mmap_fits wants vma->vm_pgoff to be between the
resource's start and end address, and the end of the vma to be no farther than
the end.  However, the sysfs PCI resource files always start at offset zero,
which means that this test always fails for programs that mmap the sysfs files.
Given the comment in the original commit
3b519e4ea618b6943a82931630872907f9ac2c2b, I _think_ the old procfs files
require that the file offset be equal to the resource's base address when
mmapping.

I think what we want here is for pci_start to be 0 when mmap_api ==
PCI_MMAP_PROCFS.  The following patch makes that change, after which the Matrox
and Mach64 X drivers work again.

Acked-by: Martin Wilck 
Signed-off-by: Darrick J. Wong 
Signed-off-by: Jesse Barnes 
Signed-off-by: Greg Kroah-Hartman

PCI: fix size checks for mmap() on /proc/bus/pci files

2010-12-09T21:26:53+00:00

commit 3b519e4ea618b6943a82931630872907f9ac2c2b upstream.

The checks for valid mmaps of PCI resources made through /proc/bus/pci files
that were introduced in 9eff02e2042f96fb2aedd02e032eca1c5333d767 have several
problems:

1. mmap() calls on /proc/bus/pci files are made with real file offsets > 0,
whereas under /sys/bus/pci/devices, the start of the resource corresponds
to offset 0. This may lead to false negatives in pci_mmap_fits(), which
implicitly assumes the /sys/bus/pci/devices layout.

2. The loop in proc_bus_pci_mmap doesn't skip empty resouces. This leads
to false positives, because pci_mmap_fits() doesn't treat empty resources
correctly (the calculated size is 1 << (8*sizeof(resource_size_t)-PAGE_SHIFT)
in this case!).

3. If a user maps resources with BAR > 0, pci_mmap_fits will emit bogus
WARNINGS for the first resources that don't fit until the correct one is found.

On many controllers the first 2-4 BARs are used, and the others are empty.
In this case, an mmap attempt will first fail on the non-empty BARs
(including the "right" BAR because of 1.) and emit bogus WARNINGS because
of 3., and finally succeed on the first empty BAR because of 2.
This is certainly not the intended behaviour.

This patch addresses all 3 issues.
Updated with an enum type for the additional parameter for pci_mmap_fits().

Signed-off-by: Martin Wilck 
Signed-off-by: Jesse Barnes 
Signed-off-by: Greg Kroah-Hartman

intel_idle: PCI quirk to prevent Lenovo Ideapad s10-3 boot hang

2010-10-29T04:44:14+00:00

commit 4731fdcf6f7bdab3e369a3f844d4ea4d4017284d upstream.

When the Lenovo Ideapad S10-3 is booted with HT enabled,
it hits a boot hang in the intel_idle driver.

This occurs when entering ATM-C4 for the first time,
unless BM_STS is first cleared.

acpi_idle doesn't see this because it first checks
and clears BM_STS, but it would hit the same hang
if that check were disabled.

http://bugs.meego.com/show_bug.cgi?id=7093
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/634702

Signed-off-by: Len Brown 
Signed-off-by: Greg Kroah-Hartman

drivers/pci/intel-iommu.c: fix build with older gcc's

2010-09-27T00:21:26+00:00

commit df08cdc7ef606509debe7677c439be0ca48790e4 upstream.

drivers/pci/intel-iommu.c: In function `__iommu_calculate_agaw':
drivers/pci/intel-iommu.c:437: sorry, unimplemented: inlining failed in call to 'width_to_agaw': function body not available
drivers/pci/intel-iommu.c:445: sorry, unimplemented: called from here

Move the offending function (and its siblings) to top-of-file, remove the
forward declaration.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=17441

Reported-by: Martin Mokrejs 
Cc: David Woodhouse 
Cc: Jesse Barnes 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

PCI: MSI: Restore read_msi_msg_desc(); add get_cached_msi_msg_desc()

2010-09-20T20:17:44+00:00

commit 30da55242818a8ca08583188ebcbaccd283ad4d9 upstream.

commit 2ca1af9aa3285c6a5f103ed31ad09f7399fc65d7 "PCI: MSI: Remove
unsafe and unnecessary hardware access" changed read_msi_msg_desc() to
return the last MSI message written instead of reading it from the
device, since it may be called while the device is in a reduced
power state.

However, the pSeries platform code really does need to read messages
from the device, since they are initially written by firmware.
Therefore:
- Restore the previous behaviour of read_msi_msg_desc()
- Add new functions get_cached_msi_msg{,_desc}() which return the
  last MSI message written
- Use the new functions where appropriate

Acked-by: Michael Ellerman 
Signed-off-by: Ben Hutchings 
Signed-off-by: Jesse Barnes 
Signed-off-by: Greg Kroah-Hartman

PCI: MSI: Remove unsafe and unnecessary hardware access

2010-09-20T20:17:44+00:00

commit fcd097f31a6ee207cc0c3da9cccd2a86d4334785 upstream.

During suspend on an SMP system, {read,write}_msi_msg_desc() may be
called to mask and unmask interrupts on a device that is already in a
reduced power state.  At this point memory-mapped registers including
MSI-X tables are not accessible, and config space may not be fully
functional either.

While a device is in a reduced power state its interrupts are
effectively masked and its MSI(-X) state will be restored when it is
brought back to D0.  Therefore these functions can simply read and
write msi_desc::msg for devices not in D0.

Further, read_msi_msg_desc() should only ever be used to update a
previously written message, so it can always read msi_desc::msg
and never needs to touch the hardware.

Tested-by: "Michael Chan" 
Signed-off-by: Ben Hutchings 
Signed-off-by: Jesse Barnes 
Signed-off-by: Greg Kroah-Hartman

PCI: disable MSI on VIA K8M800

2010-08-13T20:19:34+00:00

commit 549e15611b4ac1de51ef0e0a79c2704f50a638a2 upstream.

MSI delivery from on-board ahci controller doesn't work on K8M800.  At
this point, it's unclear whether the culprit is with the ahci
controller or the host bridge.  Given the track record and considering
the rather minimal impact of MSI, disabling it seems reasonable.

Signed-off-by: Tejun Heo 
Reported-by: Rainer Hurtado Navarro 
Signed-off-by: Jesse Barnes 
Signed-off-by: Greg Kroah-Hartman