linux-toradex.git/drivers/pci, branch v3.2.12-rt22

pci: Use __wake_up_all_locked pci_unblock_user_cfg_access()

2012-03-24T14:29:02+00:00

The waitqueue is protected by the pci_lock, so we can just avoid to
lock the waitqueue lock itself. That prevents the
might_sleep()/scheduling while atomic problem on RT

Signed-off-by: Thomas Gleixner 
Cc: stable-rt@vger.kernel.org

PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled

2012-03-19T16:02:19+00:00

commit 4949be16822e92a18ea0cc1616319926628092ee upstream.

Right now we won't touch ASPM state if ASPM is disabled, except in the case
where we find a device that appears to be too old to reliably support ASPM.
Right now we'll clear it in that case, which is almost certainly the wrong
thing to do. The easiest way around this is just to disable the blacklisting
when ASPM is disabled.

Signed-off-by: Matthew Garrett 
Signed-off-by: Jesse Barnes 
Signed-off-by: Greg Kroah-Hartman

PCI: workaround hard-wired bus number V2

2012-03-01T00:30:51+00:00

commit 71f6bd4a23130cd2f4b036010c5790b1295290b9 upstream.

Fixes PCI device detection on IBM xSeries IBM 3850 M2 / x3950 M2
when using ACPI resources (_CRS).
This is default, a manual workaround (without this patch)
would be pci=nocrs boot param.

V2: Add dev_warn if the workaround is hit. This should reveal
how common such setups are (via google) and point to possible
problems if things are still not working as expected.
-> Suggested by Jan Beulich.

Tested-by: garyhade@us.ibm.com
Signed-off-by: Yinghai Lu 
Signed-off-by: Jesse Barnes 
Signed-off-by: Greg Kroah-Hartman

PCI: Rework ASPM disable code

2012-02-06T17:41:06+00:00

commit 3c076351c4027a56d5005a39a0b518a4ba393ce2 upstream.

Right now we forcibly clear ASPM state on all devices if the BIOS indicates
that the feature isn't supported. Based on the Microsoft presentation
"PCI Express In Depth for Windows Vista and Beyond", I'm starting to think
that this may be an error. The implication is that unless the platform
grants full control via _OSC, Windows will not touch any PCIe features -
including ASPM. In that case clearing ASPM state would be an error unless
the platform has granted us that control.

This patch reworks the ASPM disabling code such that the actual clearing
of state is triggered by a successful handoff of PCIe control to the OS.
The general ASPM code undergoes some changes in order to ensure that the
ability to clear the bits isn't overridden by ASPM having already been
disabled. Further, this theoretically now allows for situations where
only a subset of PCIe roots hand over control, leaving the others in the
BIOS state.

It's difficult to know for sure that this is the right thing to do -
there's zero public documentation on the interaction between all of these
components. But enough vendors enable ASPM on platforms and then set this
bit that it seems likely that they're expecting the OS to leave them alone.

Measured to save around 5W on an idle Thinkpad X220.

Signed-off-by: Matthew Garrett 
Signed-off-by: Jesse Barnes 
Signed-off-by: Greg Kroah-Hartman

PCI: msi: Disable msi interrupts when we initialize a pci device

2012-01-26T00:13:18+00:00

commit a776c491ca5e38c26d9f66923ff574d041e747f4 upstream.

I traced a nasty kexec on panic boot failure to the fact that we had
screaming msi interrupts and we were not disabling the msi messages at
kernel startup.  The booting kernel had not enabled those interupts so
was not prepared to handle them.

I can see no reason why we would ever want to leave the msi interrupts
enabled at boot if something else has enabled those interrupts.  The pci
spec specifies that msi interrupts should be off by default.  Drivers
are expected to enable the msi interrupts if they want to use them.  Our
interrupt handling code reprograms the interrupt handlers at boot and
will not be be able to do anything useful with an unexpected interrupt.

This patch applies cleanly all of the way back to 2.6.32 where I noticed
the problem.

Signed-off-by: Eric W. Biederman 
Signed-off-by: Jesse Barnes 
Signed-off-by: Greg Kroah-Hartman

pci: Fix hotplug of Express Module with pci bridges

2011-12-18T22:10:16+00:00

I noticed that hotplug of one setup does not work with recent change in
pci tree.

After checking the bridge conf setup, I noticed that the bridges get
assigned but do not get enabled.

The reason is the following commit, while simply ignores bridge
resources when enabling a pci device:

| commit bbef98ab0f019f1b0c25c1acdf1683c68933d41b
| Author: Ram Pai 
| Date:   Sun Nov 6 10:33:10 2011 +0800
|
|    PCI: defer enablement of SRIOV BARS
|...
|    NOTE: Note, there is subtle change in the pci_enable_device() API.  Any
|    driver that depends on SRIOV BARS to be enabled in pci_enable_device()
|    can fail.

Put back bridge resource and ROM resource checking to fix the problem.

That should fix regression like BIOS does not assign correct resource to
bridge.

Discussion can be found at:
	http://www.spinics.net/lists/linux-pci/msg12874.html

Signed-off-by: Yinghai Lu 
Acked-by: Jesse Barnes 
Signed-off-by: Linus Torvalds

PCI: Set device power state to PCI_D0 for device without native PM support

2011-12-14T16:26:42+00:00

During test of one IB card with guest VM, found that, msi is not
initialized properly.

It turns out __write_msi_msg will do nothing if device current_state is
not PCI_D0.  And, that pci device does not have pm_cap in guest VM.

There is an error in setting of power state to PCI_D0 in
pci_enable_device(), but error is not returned for this.  Following is
code flow:

pci_enable_device() -->   __pci_enable_device_flags() -->
do_pci_enable_device() -->   pci_set_power_state() -->
__pci_start_power_transition()

We have following condition inside __pci_start_power_transition():
         if (platform_pci_power_manageable(dev)) {
                 error = platform_pci_set_power_state(dev, state);
                 if (!error)
                         pci_update_current_state(dev, state);
         } else {
                 error = -ENODEV;
                 /* Fall back to PCI_D0 if native PM is not supported */
                 if (!dev->pm_cap)
                         dev->current_state = PCI_D0;
         }

Here, from platform_pci_set_power_state(), acpi_pci_set_power_state() is
getting called and that is failing with ENODEV because of following
condition:

         if (!handle || ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0",&tmp)))
                 return -ENODEV;

Because of that, pci_update_current_state() is not getting called.

With this patch, if device power state can not be set via
platform_pci_set_power_state and that device does not have native pm
support, then PCI device power state will be set to PCI_D0.

-v2: This also reverts 47e9037ac16637cd7f12b8790ea7ce6680e42168, as it's
     not needed after this change.

Acked-by: "Rafael J. Wysocki" 
Signed-off-by: Ajaykumar Hotchandani
Signed-off-by: Yinghai Lu
Signed-off-by: Jesse Barnes

PCI hotplug: Always allow acpiphp to handle non-PCIe bridges

2011-12-13T18:41:23+00:00

Commit 0d52f54e2ef64c189dedc332e680b2eb4a34590a (PCI / ACPI: Make
acpiphp ignore root bridges using PCIe native hotplug) added code
that made the acpiphp driver completely ignore PCIe root complexes
for which the kernel had been granted control of the native PCIe
hotplug feature by the BIOS through _OSC.  Unfortunately, however,
this was a mistake, because on some systems there were PCI bridges
supporting PCI (non-PCIe) hotplug under such root complexes and
those bridges should have been handled by acpiphp.

For this reason, revert the changes made by the commit mentioned
above and make register_slot() in drivers/pci/hotplug/acpiphp_glue.c
avoid registering hotplug slots for PCIe ports that belong to
root complexes with native PCIe hotplug enabled (which means that
the BIOS has granted the kernel control of this feature for the
given root complex).  This is reported to address the original
issue fixed by commit 0d52f54e2ef64c189dedc332e680b2eb4a34590a and
to work on the system where that commit broke things.

Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Jesse Barnes

PCI: fix ats compile failure

2011-12-05T18:31:25+00:00

I get this compile failure on parisc:

drivers/pci/ats.c: In function 'ats_alloc_one':
drivers/pci/ats.c:29: error: implicit declaration of function 'kzalloc'
drivers/pci/ats.c:29: warning: assignment makes pointer from integer without a cast
drivers/pci/ats.c: In function 'ats_free_one':
drivers/pci/ats.c:45: error: implicit declaration of function 'kfree'

Because ats.c is missing linux/slab.h as an include.  This patch fixes it

Signed-off-by: James Bottomley 
Signed-off-by: Jesse Barnes

PCI: defer enablement of SRIOV BARS

2011-12-05T18:30:22+00:00

All the PCI BARs of a device are enabled when the device is enabled
using pci_enable_device().  This unnecessarily enables SRIOV BARs of the
device.

On some platforms, which do not support SRIOV as yet, the
pci_enable_device() fails to enable the device if its SRIOV BARs are not
allocated resources correctly.

The following patch fixes the above problem. The SRIOV BARs are now
enabled when IOV capability of the device is enabled in sriov_enable().

NOTE: Note, there is subtle change in the pci_enable_device() API.  Any
driver that depends on SRIOV BARS to be enabled in pci_enable_device()
can fail.

The patch has been touch tested on power and x86 platform.

Tested-by: Michael Wang 
Signed-off-by: Ram Pai 
Signed-off-by: Jesse Barnes