linux-toradex.git/drivers/pci, branch v3.4.92

PCI/ASPM: Don't touch ASPM if forcibly disabled

2014-06-07T23:02:15+00:00

commit a26d5ecb3201c11e03663a8f4a7dedc0c5f85c07 upstream.

Don't allocate and track PCIe ASPM state when "pcie_aspm=off" is specified
on the kernel command line.

Based-on-patch-from: Matthew Garrett 
Signed-off-by: Joe Lawrence 
Signed-off-by: Bjorn Helgaas 
Reviewed-by: David Bulkow 
Acked-by: Myron Stowe 
[wyj: Backported to 3.4: context adjust]
Signed-off-by: Yijing Wang 
Signed-off-by: Greg Kroah-Hartman

PCI: shpchp: Use per-slot workqueues to avoid deadlock

2014-06-07T23:02:07+00:00

commit f652e7d2916fe2fcf9e7d709aa5b7476b431e2dd upstream.

When we have an SHPC-capable bridge with a second SHPC-capable bridge
below it, pushing the upstream bridge's attention button causes a
deadlock.

The deadlock happens because we use the shpchp_wq workqueue to run
shpchp_pushbutton_thread(), which uses shpchp_disable_slot() to remove
devices below the upstream bridge.  When we remove the downstream bridge,
we call shpc_remove(), the shpchp driver's .remove() method.  That calls
flush_workqueue(shpchp_wq), which deadlocks because the
shpchp_pushbutton_thread() work item is still running.

This patch avoids the deadlock by creating a workqueue for every slot
and removing the single shared workqueue.

Here's the call path that leads to the deadlock:

  shpchp_queue_pushbutton_work
    queue_work(shpchp_wq)		# shpchp_pushbutton_thread
    ...

  shpchp_pushbutton_thread
    shpchp_disable_slot
      remove_board
        shpchp_unconfigure_device
          pci_stop_and_remove_bus_device
            ...
              shpc_remove		# shpchp driver .remove method
                hpc_release_ctlr
                  cleanup_slots
                    flush_workqueue(shpchp_wq)

This change is based on code inspection, since we don't have hardware
with this topology.

Based-on-patch-by: Yijing Wang 
Signed-off-by: Bjorn Helgaas 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings 
[hq: Backported to 3.4: adjust context]
Signed-off-by: Qiang Huang 
Signed-off-by: Greg Kroah-Hartman

PCI: shpchp: Check bridge's secondary (not primary) bus speed

2014-06-07T23:02:03+00:00

commit 93fa9d32670f5592c8e56abc9928fc194e1e72fc upstream.

When a new device is added below a hotplug bridge, the bridge's secondary
bus speed and the device's bus speed must match.  The shpchp driver
previously checked the bridge's *primary* bus speed, not the secondary bus
speed.

This caused hot-add errors like:

  shpchp 0000:00:03.0: Speed of bus ff and adapter 0 mismatch

Check the secondary bus speed instead.

[bhelgaas: changelog]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=75251
Fixes: 3749c51ac6c1 ("PCI: Make current and maximum bus speeds part of the PCI core")
Signed-off-by: Marcel Apfelbaum 
Signed-off-by: Bjorn Helgaas 
Acked-by: Michael S. Tsirkin 
Signed-off-by: Greg Kroah-Hartman

PCI: Enable ARI if dev and upstream bridge support it; disable otherwise

2014-02-13T19:51:17+00:00

commit b0cc6020e1cc62f1253215f189611b34be4a83c7 upstream.

Currently, we enable ARI in a device's upstream bridge if the bridge and
the device support it.  But we never disable ARI, even if the device is
removed and replaced with a device that doesn't support ARI.

This means that if we hot-remove an ARI device and replace it with a
non-ARI multi-function device, we find only function 0 of the new device
because the upstream bridge still has ARI enabled, and next_ari_fn()
only returns function 0 for the new non-ARI device.

This patch disables ARI in the upstream bridge if the device doesn't
support ARI.  See the PCIe spec, r3.0, sec 6.13.

[bhelgaas: changelog, function comment]
[yijing: replace PCIe Cap accessor with legacy PCI accessor]
Signed-off-by: Yijing Wang 
Signed-off-by: Jiang Liu 
Signed-off-by: Bjorn Helgaas 
Signed-off-by: Greg Kroah-Hartman

PCI: Remove duplicate pci_disable_device() from pcie_portdrv_remove()

2013-12-04T18:50:32+00:00

commit e7cc5cf74544d97d7b69e2701595037474db1f96 upstream.

The pcie_portdrv .probe() method calls pci_enable_device() once, in
pcie_port_device_register(), but the .remove() method calls
pci_disable_device() twice, in pcie_port_device_remove() and in
pcie_portdrv_remove().

That causes a "disabling already-disabled device" warning when removing a
PCIe port device.  This happens all the time when removing Thunderbolt
devices, but is also easy to reproduce with, e.g.,
"echo 0000:00:1c.3 > /sys/bus/pci/drivers/pcieport/unbind"

This patch removes the disable from pcie_portdrv_remove().

[bhelgaas: changelog, tag for stable]
Reported-by: David Bulkow 
Reported-by: Mika Westerberg 
Signed-off-by: Yinghai Lu 
Signed-off-by: Bjorn Helgaas 
Signed-off-by: Greg Kroah-Hartman

PCI/PM: Clear state_saved during suspend

2013-11-20T18:43:19+00:00

commit 82fee4d67ab86d6fe5eb0f9a9e988ca9d654d765 upstream.

This patch clears pci_dev->state_saved at the beginning of suspending.
PCI config state may be saved long before that.  Some drivers call
pci_save_state() from the ->probe() callback to get snapshot of sane
configuration space to use in the ->slot_reset() callback.

[wangyj: adjust context]
Signed-off-by: Konstantin Khlebnikov  # add comment
Signed-off-by: Bjorn Helgaas 
Signed-off-by: Yijing Wang 
Signed-off-by: Greg Kroah-Hartman

PCI: fix truncation of resource size to 32 bits

2013-11-20T18:43:18+00:00

commit d6776e6d5c2f8db0252f447b09736075e1bbe387 upstream.

_pci_assign_resource() took an int "size" argument, which meant that
sizes larger than 4GB were truncated.  Change type to resource_size_t.

[bhelgaas: changelog]
Signed-off-by: Nikhil P Rao 
Signed-off-by: Bjorn Helgaas 
Cc: Jiri Slaby 
Signed-off-by: Greg Kroah-Hartman

ahci: Add AMD CZ SATA device ID

2013-07-22T01:19:01+00:00

commit fafe5c3d82a470d73de53e6b08eb4e28d974d895 upstream.

To add AMD CZ SATA controller device ID of IDE mode.

[bhelgaas: drop pci_ids.h update]
Signed-off-by: Shane Huang 
Signed-off-by: Bjorn Helgaas 
Reviewed-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

PCI/PM: Fix fallback to PCI_D0 in pci_platform_power_transition()

2013-05-08T02:51:55+00:00

commit 769ba7212f2059ca9fe0c73371e3d415c8c1c529 upstream.

Commit b51306c (PCI: Set device power state to PCI_D0 for device
without native PM support) modified pci_platform_power_transition()
by adding code causing dev->current_state for devices that don't
support native PCI PM but are power-manageable by the platform to be
changed to PCI_D0 regardless of the value returned by the preceding
platform_pci_set_power_state().  In particular, that also is done
if the platform_pci_set_power_state() has been successful, which
causes the correct power state of the device set by
pci_update_current_state() in that case to be overwritten by PCI_D0.

Fix that mistake by making the fallback to PCI_D0 only happen if
the platform_pci_set_power_state() has returned an error.

[bhelgaas: folded in Yinghai's simplification, added URL & stable info]
Reference: http://lkml.kernel.org/r/27806FC4E5928A408B78E88BBC67A2306F466BBA@ORSMSX101.amr.corp.intel.com
Reported-by: Chris J. Benenati 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Bjorn Helgaas 
Acked-by: Yinghai Lu 
Signed-off-by: Greg Kroah-Hartman

PCI/PM: Clean up PME state when removing a device

2013-02-17T18:49:26+00:00

commit 249bfb83cf8ba658955f0245ac3981d941f746ee upstream.

Devices are added to pci_pme_list when drivers use pci_enable_wake()
or pci_wake_from_d3(), but they aren't removed from the list unless
the driver explicitly disables wakeup.  Many drivers never disable
wakeup, so their devices remain on the list even after they are
removed, e.g., via hotplug.  A subsequent PME poll will oops when
it tries to touch the device.

This patch disables PME# on a device before removing it, which removes
the device from pci_pme_list.  This is safe even if the device never
had PME# enabled.

This oops can be triggered by unplugging a Thunderbolt ethernet adapter
on a Macbook Pro, as reported by Daniel below.

[bhelgaas: changelog]
Reference: http://lkml.kernel.org/r/CAMVG2svG21yiM1wkH4_2pen2n+cr2-Zv7TbH3Gj+8MwevZjDbw@mail.gmail.com
Reported-and-tested-by: Daniel J Blueman 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Bjorn Helgaas 
Signed-off-by: Greg Kroah-Hartman