Pull ARM updates from Russell King:
 "Included in this update:

   - Florian Fainelli noticed that userspace segfaults caused by the
     lack of kernel-userspace helpers was hard to diagnose; we now issue
     a warning when userspace tries to use the helpers but the kernel
     has them disabled.

   - Ben Dooks wants compatibility for the old ATAG serial number with
     DT systems.

   - Some cleanup of assembly by Nicolas Pitre.

   - User accessors optimisation from Vincent Whitchurch.

   - More robust kdump on SMP systems from Yufen Wang.

   - Sebastian Andrzej Siewior noticed problems with the SMP "boot_lock"
     on RT kernels, and so we convert the Versatile series of platforms
     to use a raw spinlock instead, consolidating the Versatile
     implementation. We entirely remove the boot_lock on OMAP systems,
     where it's unnecessary. Further patches for other systems will be
     submitted for the following merge window.

   - Start switching old StrongARM-11x0 systems to use gpiolib rather
     than their private GPIO implementation - mostly PCMCIA bits.

   - ARM Kconfig cleanups.

   - Cleanup a mostly harmless mistake in the recent Spectre patch in
     4.20 (which had the effect that data that can be placed into the
     init sections was incorrectly always placed in the rodata section)"

* tag 'for-4.21' of git://git.armlinux.org.uk/~rmk/linux-arm: (25 commits)
  ARM: omap2: remove unnecessary boot_lock
  ARM: versatile: rename and comment SMP implementation
  ARM: versatile: convert boot_lock to raw
  ARM: vexpress/realview: consolidate immitation CPU hotplug
  ARM: fix the cockup in the previous patch
  ARM: sa1100/cerf: switch to using gpio_led_register_device()
  ARM: sa1100/assabet: switch to using gpio leds
  ARM: sa1100/assabet: add gpio keys support for right-hand two buttons
  ARM: sa1111: remove legacy GPIO interfaces
  pcmcia: sa1100*: remove redundant bvd1/bvd2 setting
  ARM: pxa/lubbock: switch PCMCIA to MAX1600 library
  ARM: pxa/mainstone: switch PCMCIA to MAX1600 library and gpiod APIs
  ARM: sa1100/neponset: switch PCMCIA to MAX1600 library and gpiod APIs
  ARM: sa1100/jornada720: switch PCMCIA to gpiod APIs
  pcmcia: add MAX1600 library
  ARM: sa1100: explicitly register sa11x0-pcmcia devices
  ARM: 8813/1: Make aligned 2-byte getuser()/putuser() atomic on ARMv6+
  ARM: 8812/1: Optimise copy_{from/to}_user for !CPU_USE_DOMAINS
  ARM: 8811/1: always list both ldrd/strd registers explicitly
  ARM: 8808/1: kexec:offline panic_smp_self_stop CPU
  ...

bvd1 and bvd2 both default to 1 in the generic soc_common code, so
having a driver repeat this is redundant.  Remove it.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

As Lubbock now provides GPIOs via gpiolib for controlling the socket
power, we can use the MAX1600 driver.  Switch Lubbock to use this
driver, which simplifies the code.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Convert mainstone to use the MAX1600 library and gpiod APIs for socket
status and control signals.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Convert Neponset to use the gpiod API to specify which GPIOs are used
for PCMCIA, and use the MAX1600 power switch library for Neponset,
simplifying the neponset pcmcia driver as a result.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Convert the low level PCMCIA driver to gpiod APIs for controlling
the socket power.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Add a library for the MAX1600 PCMCIA power switch device.  This is a
dual-channel device, controlled via four GPIO signals per channel.
Two signals control the Vcc output, and two control the Vpp output.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

There is nothing architecture specific in the PCMCIA core, so allow
building it everywhere.  The actual host controllers will depend on ISA,
PCI or a specific SOC.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Pull powerpc updates from Michael Ellerman:
 "Notable changes:

   - A large series to rewrite our SLB miss handling, replacing a lot of
     fairly complicated asm with much fewer lines of C.

   - Following on from that, we now maintain a cache of SLB entries for
     each process and preload them on context switch. Leading to a 27%
     speedup for our context switch benchmark on Power9.

   - Improvements to our handling of SLB multi-hit errors. We now print
     more debug information when they occur, and try to continue running
     by flushing the SLB and reloading, rather than treating them as
     fatal.

   - Enable THP migration on 64-bit Book3S machines (eg. Power7/8/9).

   - Add support for physical memory up to 2PB in the linear mapping on
     64-bit Book3S. We only support up to 512TB as regular system
     memory, otherwise the percpu allocator runs out of vmalloc space.

   - Add stack protector support for 32 and 64-bit, with a per-task
     canary.

   - Add support for PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP.

   - Support recognising "big cores" on Power9, where two SMT4 cores are
     presented to us as a single SMT8 core.

   - A large series to cleanup some of our ioremap handling and PTE
     flags.

   - Add a driver for the PAPR SCM (storage class memory) interface,
     allowing guests to operate on SCM devices (acked by Dan).

   - Changes to our ftrace code to handle very large kernels, where we
     need to use a trampoline to get to ftrace_caller().

  And many other smaller enhancements and cleanups.

  Thanks to: Alan Modra, Alistair Popple, Aneesh Kumar K.V, Anton
  Blanchard, Aravinda Prasad, Bartlomiej Zolnierkiewicz, Benjamin
  Herrenschmidt, Breno Leitao, Cédric Le Goater, Christophe Leroy,
  Christophe Lombard, Dan Carpenter, Daniel Axtens, Finn Thain, Gautham
  R. Shenoy, Gustavo Romero, Haren Myneni, Hari Bathini, Jia Hongtao,
  Joel Stanley, John Allen, Laurent Dufour, Madhavan Srinivasan, Mahesh
  Salgaonkar, Mark Hairgrove, Masahiro Yamada, Michael Bringmann,
  Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Nathan
  Fontenot, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Oliver
  O'Halloran, Paul Mackerras, Petr Vorel, Rashmica Gupta, Reza Arbab,
  Rob Herring, Sam Bobroff, Samuel Mendoza-Jonas, Scott Wood, Stan
  Johnson, Stephen Rothwell, Stewart Smith, Suraj Jitindar Singh, Tyrel
  Datwyler, Vaibhav Jain, Vasant Hegde, YueHaibing, zhong jiang"

* tag 'powerpc-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (221 commits)
  Revert "selftests/powerpc: Fix out-of-tree build errors"
  powerpc/msi: Fix compile error on mpc83xx
  powerpc: Fix stack protector crashes on CPU hotplug
  powerpc/traps: restore recoverability of machine_check interrupts
  powerpc/64/module: REL32 relocation range check
  powerpc/64s/radix: Fix radix__flush_tlb_collapsed_pmd double flushing pmd
  selftests/powerpc: Add a test of wild bctr
  powerpc/mm: Fix page table dump to work on Radix
  powerpc/mm/radix: Display if mappings are exec or not
  powerpc/mm/radix: Simplify split mapping logic
  powerpc/mm/radix: Remove the retry in the split mapping logic
  powerpc/mm/radix: Fix small page at boundary when splitting
  powerpc/mm/radix: Fix overuse of small pages in splitting logic
  powerpc/mm/radix: Fix off-by-one in split mapping logic
  powerpc/ftrace: Handle large kernel configs
  powerpc/mm: Fix WARN_ON with THP NUMA migration
  selftests/powerpc: Fix out-of-tree build errors
  powerpc/time: no steal_time when CONFIG_PPC_SPLPAR is not selected
  powerpc/time: Only set CONFIG_ARCH_HAS_SCALED_CPUTIME on PPC64
  powerpc/time: isolate scaled cputime accounting in dedicated functions.
  ...

Pull pcmcia fixes from Dominik Brodowski:
 "These are just a few odd fixes and improvements to the PCMCIA core and
  to a few PCMCIA device drivers"

* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
  pcmcia: Implement CLKRUN protocol disabling for Ricoh bridges
  pcmcia: pcmcia_resource: Replace mdelay() with msleep()
  pcmcia: add error handling for pcmcia_enable_device in qlogic_stub
  char: pcmcia: cm4000_cs: Replace mdelay with usleep_range in set_protocol
  pcmcia: Use module_pcmcia_driver for scsi drivers
  pcmcia: remove KERN_INFO level from debug message