Pull more ARM multiplatform updates from Arnd Bergmann:
 "The second part of the multiplatform changes now converts the
  Intel/Marvell PXA platform along with the rest. The patches went
  through several rebases before the merge window as bugs were found, so
  they remained separate.

  This has to touch a lot of drivers, in particular the touchscreen,
  pcmcia, sound and clk bits, to detach the driver files from the
  platform and board specific header files"

* tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
  ARM: pxa/mmp: remove traces of plat-pxa
  ARM: pxa: convert to multiplatform
  ARM: pxa/sa1100: move I/O space to PCI_IOBASE
  ARM: pxa: remove support for MTD_XIP
  ARM: pxa: move mach/*.h to mach-pxa/
  ARM: PXA: fix multi-cpu build of xsc3
  ARM: pxa: move plat-pxa to drivers/soc/
  ARM: mmp: rename pxa_register_device
  ARM: mmp: remove tavorevb board support
  ARM: pxa: remove unused mach/bitfield.h
  ARM: pxa: move clk register definitions to driver
  ARM: pxa: move smemc register access from clk to platform
  cpufreq: pxa3: move clk register access to clk driver
  ARM: pxa: remove get_clk_frequency_khz()
  ARM: pxa: pcmcia: move smemc configuration back to arch
  ASoC: pxa: i2s: use normal MMIO accessors
  ASoC: pxa: ac97: use normal MMIO accessors
  ASoC: pxa: use pdev resource for FIFO regs
  Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops
  Input: wm97xx - switch to using threaded IRQ
  ...

Pull pcmcia updates from Dominik Brodowski:
 "A few odd cleanups and fixes, including a Kconfig fix to add a
  required dependency on MIPS"

* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
  pcmcia: Use platform_get_irq() to get the interrupt
  pcmcia: db1xxx_ss: restrict to MIPS_DB1XXX boards
  drivers/pcmcia: Fix typo in comment

It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ)
for requesting IRQ's resources any more, as they can be not ready yet in
case of DT-booting.

platform_get_irq() instead is a recommended way for getting IRQ even if
it was not retrieved earlier.

It also makes code simpler because we're getting "int" value right away
and no conversion from resource to int is required.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

PXA and StrongARM1100 traditionally map their I/O space 1:1 into virtual
memory, using a per-bus io_offset that matches the base address of the
ioremap mapping.

In order for PXA to work in a multiplatform config, this needs to
change so I/O space starts at PCI_IOBASE (0xfee00000). Since the pcmcia
soc_common support is shared with StrongARM1100, both have to change at
the same time. The affected machines are:

 - Anything with a PCMCIA slot now uses pci_remap_iospace, which
   is made available to PCMCIA configurations as well, rather than
   just PCI. The first PCMCIA slot now starts at port number 0x10000.

 - The Zeus and Viper platforms have PC/104-style ISA buses,
   which have a static mapping for both I/O and memory space at
   0xf1000000, which can no longer work. It does not appear to have
   any in-tree users, so moving it to port number 0 makes them
   behave like a traditional PC.

 - SA1100 does support ISA slots in theory, but all machines that
   originally enabled this appear to have been removed from the tree
   ages ago, and the I/O space is never mapped anywhere.

 - The Nanoengine machine has support for PCI slots, but looks
   like this never included I/O space, the resources only define the
   location for memory and config space.

With this, the definitions of __io() and IO_SPACE_LIMIT can be simplified,
as the only remaining cases are the generic PCI_IOBASE and the custom
inb()/outb() macros on RiscPC.  S3C24xx still has a custom inb()/outb()
in this here, but this is already removed in another branch.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Rather than poking at the smemc registers directly from the
pcmcia/pxa2xx_base driver, move those bits into machine file
to have a cleaner interface.

Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Link: https://lore.kernel.org/lkml/87d0egjzxk.fsf@belgarion.home/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The ISA I/O space handling in omap_cf is incompatible with
PCI drivers in a multiplatform kernel, and requires a custom
mach/io.h.

Change the driver to use pci_remap_iospace() like PCI drivers do,
so the generic ioport access can work across platforms.

To actually use that code, we have to select CONFIG_PCI
here.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

There is only one board that uses the omap_cf driver, so
moving the chipselect configuration there does not lead
to code duplication but avoids the use of mach/tc.h
in drivers.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The drivers/pcmcia/pxa2xx_*.c are essentially part of the
board files, but for historic reasons located in drivers/pcmcia.

Move them into the same place as the actual board file to avoid
lots of machine header inclusions.

Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The mach/hardware.h is included in lots of places, and it provides
three different things on pxa:

- the cpu_is_pxa* macros
- an indirect inclusion of mach/addr-map.h
- the __REG() and io_pv2() helper macros

Split it up into separate <linux/soc/pxa/cpu.h> and mach/pxa-regs.h
headers, then change all the files that use mach/hardware.h to
include the exact set of those three headers that they actually
need, allowing for further more targeted cleanup.

linux/soc/pxa/cpu.h can remain permanently exported and is now in
a global location along with similar headers. pxa-regs.h and
addr-map.h are only used in a very small number of drivers now
and can be moved to arch/arm/mach-pxa/ directly when those drivers
are to pass the necessary data as resources.

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-leds@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-watchdog@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

I have no reason to believe these boards have any more users and I
haven't tested them for several years.  Removing them may simplify
other changes to the various PXA boards people still care about.
The recent conversion of pxa2xx_spi to GPIO descriptors for example
had to update this board despite no one caring or testing.

Great boards that got me started in kernel development, RIP!

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Daniel Mack <daniel@zonque.org>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: soc@kernel.org
Link: https://lore.kernel.org/r/20220227134431.908998-1-jic23@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>