Felipe writes:

USB: changes for v5.8 merge window

Rather busy cycle. We have a total 99 non-merge commits going into v5.8
merge window. The majority of the changes are in dwc3 this around (31.7%
of all changes). It's composed mostly Thinh's recent updates to get dwc3
to behave correctly with stream transfers. We have also have Roger's for
Keystone platforms and Neil's updates for the meson glue layer.

Apart from those, we have the usual set of non-critical fixes, new
device IDs, spelling fixes all over the place.

Signed-off-by: Felipe Balbi <balbi@kernel.org>

* tag 'usb-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (99 commits)
  usb: dwc3: keystone: Turn on USB3 PHY before controller
  dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property
  dt-bindings: usb: convert keystone-usb.txt to YAML
  usb: dwc3: gadget: Check for prepared TRBs
  usb: gadget: Fix issue with config_ep_by_speed function
  usb: cdns3: ep0: delete the redundant status stage
  usb: dwc2: Update Core Reset programming flow.
  usb: gadget: fsl: Fix a wrong judgment in fsl_udc_probe()
  usb: gadget: fix potential double-free in m66592_probe.
  usb: cdns3: Fix runtime PM imbalance on error
  usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check
  usb: dwc3: Increase timeout for CmdAct cleared by device controller
  USB: dummy-hcd: use configurable endpoint naming scheme
  usb: cdns3: gadget: assign interrupt number to USB gadget structure
  usb: gadget: core: sync interrupt before unbind the udc
  arm64: dts: qcom: sc7180: Add interconnect properties for USB
  arm64: dts: qcom: sdm845: Add interconnect properties for USB
  dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver
  ARM: dts: at91: Remove the USB EP child node
  dt-bindings: usb: atmel: Mark EP child node as deprecated
  ...

The registers which are managed by the meson-gxl-usb3 PHY driver are
actually "USB control" registers (which are "glue" registers which
manage OTG detection and routing of the OTG capable port between the
DWC2 peripheral-only controller and the DWC3 host-only controller).

Drop the meson-gxl-usb3 PHY driver now that the dwc3-meson-g12a-usb
driver supports the USB control registers on GXL and GXM SoCs (these
were previously managed by the meson-gxl-usb3 PHY driver).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>

The 3.10 vendor kernel sets the ACA_ENABLE bit on Meson8b, Meson8m2 and
GXBB, but not on Meson8. Add a compatible string for Meson8m2 which also
sets that bit.
While here, also update the Kconfig text and MODULE_DESCRIPTION.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Thomas Graichen <thomas.graichen@gmail.com>
Link: https://lore.kernel.org/r/20200512222424.549351-7-martin.blumenstingl@googlemail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

The vendor driver unsets the set_iddig bit during power-on as well and
sets it when suspending the PHY. I did not notice this in the vendor
driver first, because it's part of the dwc_otg driver there (instead of
their PHY code). While here, also add all other REG_DBG_UART register
bit definitions.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Thomas Graichen <thomas.graichen@gmail.com>
Link: https://lore.kernel.org/r/20200512222424.549351-6-martin.blumenstingl@googlemail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Skip setting REG_ADP_BC_ACA_ENABLE on Meson8 SoCs and polling for the
REG_ADP_BC_ACA_PIN_FLOAT bit. The vendor also skips this part on Meson8
SoCs.
This fixes initialization of the host-only USB PHY on Meson8 which would
otherwise fail with "USB ID detect failed!".

Fixes: 4a3449d1a0a10c ("phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs")
Reported-by: Thomas Graichen <thomas.graichen@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Thomas Graichen <thomas.graichen@gmail.com>
Link: https://lore.kernel.org/r/20200512222424.549351-5-martin.blumenstingl@googlemail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Using a MMIO regmap and switch to regmap_update_bits() to simplify the
code in the driver. Also switch to devm_platform_ioremap_resource()
instead of open-coding it. No functional changes intended.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Thomas Graichen <thomas.graichen@gmail.com>
Link: https://lore.kernel.org/r/20200512222424.549351-4-martin.blumenstingl@googlemail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg)

   - Add more 32 GT/s link speed decoding and improve the implementation
     (Yicong Yang)

  Resource management:

   - Add support for sizing programmable host bridge apertures and fix a
     related alpha Nautilus regression (Ivan Kokshaysky)

  Interrupts:

   - Add boot interrupt quirk mechanism for Xeon chipsets and document
     boot interrupts (Sean V Kelley)

  PCIe native device hotplug:

   - When possible, disable in-band presence detect and use PDS
     (Alexandru Gagniuc)

   - Add DMI table for devices that don't use in-band presence detection
     but don't advertise that correctly (Stuart Hayes)

   - Fix hang when powering slots up/down via sysfs (Lukas Wunner)

   - Fix an MSI interrupt race (Stuart Hayes)

  Virtualization:

   - Add ACS quirks for Zhaoxin devices (Raymond Pang)

  Error handling:

   - Add Error Disconnect Recover (EDR) support so firmware can report
     devices disconnected via DPC and we can try to recover (Kuppuswamy
     Sathyanarayanan)

  Peer-to-peer DMA:

   - Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew
     Maier)

  ASPM:

   - Reduce severity of common clock config message (Chris Packham)

   - Clear the correct bits when enabling L1 substates, so we don't go
     to the wrong state (Yicong Yang)

  Endpoint framework:

   - Replace EPF linkup ops with notifier call chain and improve locking
     (Kishon Vijay Abraham I)

   - Fix concurrent memory allocation in OB address region (Kishon Vijay
     Abraham I)

   - Move PF function number assignment to EPC core to support multiple
     function creation methods (Kishon Vijay Abraham I)

   - Fix issue with clearing configfs "start" entry (Kunihiko Hayashi)

   - Fix issue with endpoint MSI-X ignoring BAR Indicator and Table
     Offset (Kishon Vijay Abraham I)

   - Add support for testing DMA transfers (Kishon Vijay Abraham I)

   - Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I)

   - Add support for tests to clear IRQ (Kishon Vijay Abraham I)

   - Add common DT schema for endpoint controllers (Kishon Vijay Abraham I)

  Amlogic Meson PCIe controller driver:

   - Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi
     Pommarel)

   - Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi
     Pommarel)

  Cadence PCIe controller driver:

   - Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay
     Abraham I)

  Intel VMD host bridge driver:

   - Add two VMD Device IDs that require bus restriction mode (Sushma
     Kalakota)

  Mobiveil PCIe controller driver:

   - Refactor and modularize mobiveil driver (Hou Zhiqiang)

   - Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang)

  Microsoft Hyper-V host bridge driver:

   - Add support for Hyper-V PCI protocol version 1.3 and
     PCI_BUS_RELATIONS2 (Long Li)

   - Refactor to prepare for virtual PCI on non-x86 architectures (Boqun
     Feng)

   - Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui)

  NVIDIA Tegra PCIe controller driver:

   - Use pci_parse_request_of_pci_ranges() (Rob Herring)

   - Add support for endpoint mode and related DT updates (Vidya Sagar)

   - Reduce -EPROBE_DEFER error message log level (Thierry Reding)

  Qualcomm PCIe controller driver:

   - Restrict class fixup to specific Qualcomm devices (Bjorn Andersson)

  Synopsys DesignWare PCIe controller driver:

   - Refactor core initialization code for endpoint mode (Vidya Sagar)

   - Fix endpoint MSI-X to use correct table address (Kishon Vijay
     Abraham I)

  TI DRA7xx PCIe controller driver:

   - Fix MSI IRQ handling (Vignesh Raghavendra)

  TI Keystone PCIe controller driver:

   - Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I)

  Miscellaneous:

   - Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng
     Feng)

   - Use ioremap(), not phys_to_virt(), for platform ROM to fix video
     ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)"

* tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits)
  misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS
  PCI: tegra: Print -EPROBE_DEFER error message at debug level
  misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq()
  misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices
  tools: PCI: Add 'e' to clear IRQ
  misc: pci_endpoint_test: Add ioctl to clear IRQ
  misc: pci_endpoint_test: Avoid using module parameter to determine irqtype
  PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt
  PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address
  PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments
  misc: pci_endpoint_test: Add support to get DMA option from userspace
  tools: PCI: Add 'd' command line option to support DMA
  misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation
  PCI: endpoint: functions/pci-epf-test: Print throughput information
  PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data
  PCI: pciehp: Fix MSI interrupt race
  PCI: pciehp: Fix indefinite wait on sysfs requests
  PCI: endpoint: Fix clearing start entry in configfs
  PCI: tegra: Add support for PCIe endpoint mode in Tegra194
  PCI: sysfs: Revert "rescan" file renames
  ...

This adds support for the USB2 PHY found in the Amlogic A1 SoC Family.

It supports host mode only.

Signed-off-by: Yue Wang <yue.wang@amlogic.com>
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Arguments are supposed to be ordered high then low.

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

This adds support for the PCI PHY found in the Amlogic AXG SoC Family.
This will allow to mutualize code in pci-meson.c between AXG and G12A
SoC.

This PHY also uses and chains an analog PHY, which on AXG platform
is needed to have reliable PCIe communication.

Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>