linux-toradex.git/drivers/phy/freescale, branch v6.17

phy: freescale: fsl-samsung-hdmi: Improve LUT search for best clock

2025-05-14T11:15:51+00:00

Searching the look-up-table runs so long as the frequency in the
table is at or below the desired rate.  This works well in most
cases, but the next entry in the LUT might be closer to the
nominal value than the lower one.  Add some logic to check
the higer value is any closer to the nominal value and use it.

Signed-off-by: Adam Ford 

Link: https://lore.kernel.org/r/20250504204043.418924-3-aford173@gmail.com
Signed-off-by: Vinod Koul

phy: freescale: fsl-samsung-hdmi: Refactor finding PHY settings

2025-05-14T11:15:51+00:00

There are two functions, round_rate and set_rate that duplicate
a lot of the same work, so simplify the code by creating a helper
function that will identify the phy settings for a desired clock
rate and return the structure with the corresponding settings.
>From this structure, the round_rate and set_rate can both get what
they need to achieve the clock setting closest to the desired rate
as possible while minimizing the duplicated code.

Also rename phy_clk_set_rate to fsl_samsung_hdmi_phy_clk_set_rate.

Suggested-by: Uwe Kleine-König 
Signed-off-by: Adam Ford 

Link: https://lore.kernel.org/r/20250504204043.418924-2-aford173@gmail.com
Signed-off-by: Vinod Koul

phy: freescale: fsl-samsung-hdmi: Rename phy_clk_round_rate

2025-05-14T11:15:51+00:00

phy_clk_round_rate sounds like a generic helper function.  In
reality, it is unique to the phy-fsl-samsung-hdmi. Rename
phy_clk_round_rate to fsl_samsung_hdmi_phy_clk_round_rate.
No functional change intended.

Suggested-by: Uwe Kleine-König 
Signed-off-by: Adam Ford 

Link: https://lore.kernel.org/r/20250504204043.418924-1-aford173@gmail.com
Signed-off-by: Vinod Koul

phy: fsl-imx8mq-usb: add i.MX95 tuning support

2025-05-14T10:16:04+00:00

The i.MX8MP and i.MX95 USB3 PHY have different tuning parameter for same
tuning field, this will add i.MX95 tuning support.

Reviewed-by: Jun Li 
Signed-off-by: Xu Yang 
Link: https://lore.kernel.org/r/20250430094502.2723983-4-xu.yang_2@nxp.com
Signed-off-by: Vinod Koul

phy: fsl-imx8mq-usb: fix phy_tx_vboost_level_from_property()

2025-05-14T10:16:04+00:00

The description of TX_VBOOST_LVL is wrong in register PHY_CTRL3
bit[31:29].

The updated description as below:
  011: Corresponds to a launch amplitude of 0.844 V.
  100: Corresponds to a launch amplitude of 1.008 V.
  101: Corresponds to a launch amplitude of 1.156 V.

This will fix the parsing function
phy_tx_vboost_level_from_property() to return correct value.

Fixes: 63c85ad0cd81 ("phy: fsl-imx8mp-usb: add support for phy tuning")
Cc: stable@vger.kernel.org
Reviewed-by: Jun Li 
Signed-off-by: Xu Yang 
Link: https://lore.kernel.org/r/20250430094502.2723983-3-xu.yang_2@nxp.com
Signed-off-by: Vinod Koul

phy: freescale: imx8m-pcie: Simplify with dev_err_probe()

2025-05-14T09:13:47+00:00

Error handling in probe() can be a bit simpler with dev_err_probe().

Signed-off-by: Alexander Stein 
Link: https://lore.kernel.org/r/20250429090152.1094243-1-alexander.stein@ew.tq-group.com
Signed-off-by: Vinod Koul

Merge tag 'phy-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

2025-04-01T19:47:11+00:00

Pull phy updates from Vinod Koul:
 "A fairly moderate sized request for the generic phy subsystem with
  some new device and driver support along with driver updates with
  Samsung and Qualcomm ones being major ones.

  New HW Support:

   - Qualcomm X1P42100 PCIe Gen4x4, QCS615 qmp usbc, PCIe UNIPHY 28LP
     driver, SM8750 QMP UFS PHY

   - Rockchip rk3576 hdptx, rk3562 naneng-combo support

   - Samsung MIPI D-/C-PHY driver, ExynosAutov920 ufs phy driver

  Updates:

   - Samsung USB3 Type-C lane orientation detection and configuration
     for Google gs101

   - Qualcomm support for dual lane PHY support for QCS8300 SoC"

* tag 'phy-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (47 commits)
  phy: rockchip-naneng-combo: Support rk3562
  dt-bindings: phy: rockchip: Add rk3562 naneng-combophy compatible
  phy: rockchip: Add Samsung MIPI D-/C-PHY driver
  dt-bindings: phy: Add Rockchip MIPI C-/D-PHY schema
  phy: qcom: uniphy-28lp: add COMMON_CLK dependency
  phy: rockchip: usbdp: Remove unnecessary bool conversion
  phy: rockchip: usbdp: Avoid call hpd_event_trigger in dp_phy_init
  phy: rockchip: usbdp: Only verify link rates/lanes/voltage when the corresponding set flags are set
  phy: qcom-qmp-pcie: add dual lane PHY support for QCS8300
  dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the QCS8300 QMP PCIe PHY Gen4 x2
  phy: qcom-qmp-ufs: Add PHY Configuration support for sm8750
  dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: document the SM8750 QMP UFS PHY
  phy: qcom: Introduce PCIe UNIPHY 28LP driver
  dt-bindings: phy: qcom,uniphy-pcie: Document PCIe uniphy
  phy: qcom: qmp-usbc: Add qmp configuration for QCS615
  phy: freescale: imx8m-pcie: assert phy reset and perst in power off
  phy: freescale: imx8m-pcie: cleanup reset logic
  phy: core: Remove unused phy_pm_runtime_(allow|forbid)
  dt-bindings: phy: document Allwinner A523 USB-2.0 PHY
  phy: phy-rockchip-samsung-hdptx: Add support for RK3576
  ...

phy: freescale: imx8m-pcie: assert phy reset and perst in power off

2025-03-10T19:42:37+00:00

Ensure the PHY reset and perst is asserted during power-off to
guarantee it is in a reset state upon repeated power-on calls. This
resolves an issue where the PHY may not properly initialize during
subsequent power-on cycles. Power-on will deassert the reset at the
appropriate time after tuning the PHY parameters.

During suspend/resume cycles, we observed that the PHY PLL failed to
lock during resume when the CPU temperature increased from 65C to 75C.
The observed errors were:
  phy phy-32f00000.pcie-phy.3: phy poweron failed --> -110
  imx6q-pcie 33800000.pcie: waiting for PHY ready timeout!
  imx6q-pcie 33800000.pcie: PM: dpm_run_callback(): genpd_resume_noirq+0x0/0x80 returns -110
  imx6q-pcie 33800000.pcie: PM: failed to resume noirq: error -110

This resulted in a complete CPU freeze, which is resolved by ensuring
the PHY is in reset during power-on, thus preventing PHY PLL failures.

Cc: stable@vger.kernel.org
Fixes: 1aa97b002258 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver")
Signed-off-by: Stefan Eichenberger 
Reviewed-by: Frank Li 
Link: https://lore.kernel.org/r/20250305144355.20364-3-eichest@gmail.com
Signed-off-by: Vinod Koul

phy: freescale: imx8m-pcie: cleanup reset logic

2025-03-10T19:42:37+00:00

Remove the switch statement and base perst release on whether it is
found in the device tree. The probe function fails without the reset
property, making it mandatory. Therefore, always release reset
independent of the variant.

This does not change the behavior of the driver but reduces driver
complexity and allows for easier future modifications.

Signed-off-by: Stefan Eichenberger 
Reviewed-by: Frank Li 
Link: https://lore.kernel.org/r/20250305144355.20364-2-eichest@gmail.com
Signed-off-by: Vinod Koul

phy: fsl-imx8mq-usb: add tca function driver for imx95

2025-02-14T12:26:12+00:00

The i.MX95 USB3 phy has a Type-C Assist block (TCA). This block consists
two functional blocks (XBar assist and VBus assist) and one system
access interface using APB.

The primary functionality of XBar assist is:
 - switching lane for flip
 - moving unused lanes into lower power states.

This info can be get from:
i.MX95 RM Chapter 163.3.8 Type-C assist (TCA) block.

This will add support for TCA block to achieve lane switching and tca
lower power functionality.

Signed-off-by: Xu Yang 
Reviewed-by: Jun Li 
Link: https://lore.kernel.org/r/20241204050907.1081781-1-xu.yang_2@nxp.com
Signed-off-by: Vinod Koul