On a few Kria KR260 Robotics Starter Kit the PS-GEM SGMII linkup is not
happening after the resume. This is because serdes registers are reset
when FPD is off (in suspend state) and needs to be reprogrammed in the
resume path with the same default initialization as done in the first
stage bootloader psu_init routine.
To address the failure introduce a set of serdes registers to be saved in
the suspend path and then restore it on resume.
Fixes: 4a33bea00314 ("phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver")
Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1722837547-2578381-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Return negative -ENOMEM instead of positive ENOMEM.
Fixes: 497ddafe915e ("phy: exynos5-usbdrd: convert Vbus supplies to regulator_bulk")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/a956a3e2-c6ce-4f07-ad80-ec8a96e00d16@stanley.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
According to fsl,imx8mq-usb-phy.yaml, this tuning parameter should be
fsl,phy-pcs-tx-deemph-3p5db-attenuation-db.
Fixes: 63c85ad0cd81 ("phy: fsl-imx8mp-usb: add support for phy tuning")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20240801124642.1152838-1-xu.yang_2@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Update the PCIe Gen4 PHY init sequence with the latest based on internal
Qualcomm documentation.
Fixes: 606060ce8fd0 ("phy: qcom-qmp-pcie: Add support for X1E80100 g3x2 and g4x2 PCIE")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240801-x1e80100-phy-qmp-pcie-fix-config-v2-1-cdc0f22b4169@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull phy updates from Vinod Koul: "New Support - Samsung Exynos gs101 drd combo phy - Qualcomm SC8180x USB uniphy, IPQ9574 QMP PCIe phy - Airoha EN7581 PCIe phy - Freescale i.MX8Q HSIO SerDes phy - Starfive jh7110 dphy tx Updates: - Resume support for j721e-wiz driver - Updates to Exynos usbdrd driver - Support for optional power domains in g12a usb2-phy driver - Debugfs support and updates to zynqmp driver" * tag 'phy-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (56 commits) phy: airoha: Add dtime and Rx AEQ IO registers dt-bindings: phy: airoha: Add dtime and Rx AEQ IO registers dt-bindings: phy: rockchip-emmc-phy: Convert to dtschema dt-bindings: phy: qcom,qmp-usb: fix spelling error phy: exynos5-usbdrd: support Exynos USBDRD 3.1 combo phy (HS & SS) phy: exynos5-usbdrd: convert Vbus supplies to regulator_bulk phy: exynos5-usbdrd: convert (phy) register access clock to clk_bulk phy: exynos5-usbdrd: convert core clocks to clk_bulk phy: exynos5-usbdrd: support isolating HS and SS ports independently dt-bindings: phy: samsung,usb3-drd-phy: add gs101 compatible phy: core: Fix documentation of of_phy_get phy: starfive: Correct the dphy configure process phy: zynqmp: Add debugfs support phy: zynqmp: Take the phy mutex in xlate phy: zynqmp: Only wait for PLL lock "primary" instances phy: zynqmp: Store instance instead of type phy: zynqmp: Enable reference clock correctly phy: cadence-torrent: Check return value on register read phy: Fix the cacography in phy-exynos5250-usb2.c phy: phy-rockchip-samsung-hdptx: Select CONFIG_MFD_SYSCON ...
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.11-rc1.
Nothing earth-shattering in here, just constant forward progress in
adding support for new hardware and better debugging functionalities
for thunderbolt devices and the subsystem. Included in here are:
- thunderbolt debugging update and driver additions
- xhci driver updates
- typec driver updates
- kselftest device driver changes (acked by the relevant maintainers,
depended on other changes in this tree.)
- cdns3 driver updates
- gadget driver updates
- MODULE_DESCRIPTION() additions
- dwc3 driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (112 commits)
kselftest: devices: Add test to detect device error logs
kselftest: Move ksft helper module to common directory
kselftest: devices: Move discoverable devices test to subdirectory
usb: gadget: f_uac2: fix non-newline-terminated function name
USB: uas: Implement the new shutdown callback
USB: core: add 'shutdown' callback to usb_driver
usb: typec: Drop explicit initialization of struct i2c_device_id::driver_data to 0
usb: dwc3: enable CCI support for AMD-xilinx DWC3 controller
usb: dwc2: add support for other Lantiq SoCs
usb: gadget: Use u16 types for 16-bit fields
usb: gadget: midi2: Fix incorrect default MIDI2 protocol setup
usb: dwc3: core: Check all ports when set phy suspend
usb: typec: tcpci: add support to set connector orientation
dt-bindings: usb: Convert fsl-usb to yaml
usb: typec: ucsi: reorder operations in ucsi_run_command()
usb: typec: ucsi: extract common code for command handling
usb: typec: ucsi: inline ucsi_read_message_in
usb: typec: ucsi: rework command execution functions
usb: typec: ucsi: split read operation
usb: typec: ucsi: simplify command sending API
...
Use regulator_hardware_enable() for controlling VBUS enable for RZ/G2L alike SoCs in interrupt context. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20240702180032.207275-4-biju.das.jz@bp.renesas.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Introduce Tx-Rx detection Time and Rx AEQ training mappings to phy-airoha-pcie driver. This is a preliminary patch to introduce PCIe support to En7581 SoC through the mediatek-gen3 PCIe driver. This change is not introducing any backward compatibility issue since the EN7581 dts is not upstream yet. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/edf3b28926177166c65256604d69f2f576cb6fb3.1719682943.git.lorenzo@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for the Exynos USB 3.1 DRD combo phy, as found in Exynos 9 SoCs like Google GS101. It supports USB SS, HS and DisplayPort. In terms of UTMI+, this is very similar to the existing Exynos850 support in this driver. The difference is that this combo phy supports both UTMI+ (HS) and PIPE3 (SS). It also supports DP alt mode. The number of ports for UTMI+ and PIPE3 can be determined using the LINKPORT register (which also exists on Exynos E850). For SuperSpeed (SS) a new SS phy is in use and its PIPE3 interface is new compared to Exynos E850, and also very different from the existing support for older Exynos SoCs in this driver. The SS phy needs a bit more configuration work and register tuning for signal quality to work reliably, presumably due to the higher frequency, e.g. to account for different board layouts. Additionally, power needs to be enabled before writing to the SS phy registers. This commit adds the necessary changes for USB HS and SS to work. DisplayPort is out of scope in this commit. Notes: * For the register tuning, exynos5_usbdrd_apply_phy_tunes() has been added with the appropriate data structures to support tuning at various stages during initialisation. Since these are hardware specific, the platform data is supposed to be populated accordingly. The implementation is loosely modelled after the Samsung UFS PHY driver. There is one tuning state for UTMI+, PTS_UTMI_POSTINIT, to execute after init and generally intended for HS signal tuning, as done in this commit. PTS_PIPE3_PREINIT PTS_PIPE3_INIT PTS_PIPE3_POSTINIT PTS_PIPE3_POSTLOCK are tuning states for PIPE3. In the downstream driver, preinit differs by Exynos SoC, and postinit and postlock are different per board. The latter haven't been implemented for gs101 here, because downstream doesn't use them on gs101 either. * Signal lock acquisition for SS depends on the orientation of the USB-C plug. Since there currently is no infrastructure to chain connector events to both the USB DWC3 driver and this phy driver, a work-around has been added in exynos5_usbdrd_usbdp_g2_v4_pma_check_cdr_lock() to check both registers if it failed in one of the orientations. * Equally, we can only establish SS speed in one of the connector orientations due to programming differences when selecting the lane mux in exynos5_usbdrd_usbdp_g2_v4_pma_lane_mux_sel(), which really needs to be dynamic, based on the orientation of the connector. * As is, we can establish a HS link using any cable, and an SS link in one orientation of the plug, falling back to HS if the orientation is reversed to the expectation. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Peter Griffin <peter.griffin@linaro.org> Tested-by: Peter Griffin <peter.griffin@linaro.org> Tested-by: Will McVicker <willmcvicker@google.com> Link: https://lore.kernel.org/r/20240617-usb-phy-gs101-v3-6-b66de9ae7424@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
Using the regulator_bulk APIs, the handling of power supplies becomes much simpler. There is no need anymore to check if regulators have been acquired or not, the bulk APIs will do all the work for us. We can also drop the various handles to the individual power supplies in the driver runtime data and instead simply treat them all as one thing. Error cleanup also becomes much simpler. Converting to the regulator_bulk APIs also makes it easier to add support for those SoCs that have additional power supplies for the PHY. Google Tensor gs101 is one example of such a SoC. Otherwise we'd have to add all additional supplies individually via individual calls to regulator_get() and enable/disable handle them all individually, including complicated error handling. That doesn't scale and clutters the code. Just update the code to use the regulator_bulk APIs. Signed-off-by: André Draszik <andre.draszik@linaro.org> Tested-by: Will McVicker <willmcvicker@google.com> Reviewed-by: Peter Griffin <peter.griffin@linaro.org> Tested-by: Peter Griffin <peter.griffin@linaro.org> Link: https://lore.kernel.org/r/20240617-usb-phy-gs101-v3-5-b66de9ae7424@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>