linux-toradex.git/drivers/pinctrl/Makefile, branch v3.7.4 Linux kernel for Apalis and Colibri modules Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus 2012-10-09T07:08:04+00:00 Linus Torvalds torvalds@linux-foundation.org 2012-10-09T07:08:04+00:00 de390bba797aa9a554bc1769b6a8771605854d79 Pull MIPS update from Ralf Baechle: "This is the MIPS update for 3.7. A fair chunk of them are platform updates to the Cavium Octeon SOC (which involves machine generated header files of considerable size), Atheros ATH79xx, RMI aka Netlogic aka Broadcom XLP, Broadcom BCM63xx platforms. Support for the commercial MIPS simulator MIPSsim has been removed as MIPS Technologies is shifting away from this product and Qemu is offering various more powerful platforms. The generic MIPS code can now also probe for no-execute / write-only TLB features implemented without the full SmartMIPS extension as permitted by the latest MIPS processor architecture. Lots of small changes to generic code." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (78 commits) MIPS: ath79: Fix CPU/DDR frequency calculation for SRIF PLLs MIPS: ath79: use correct fractional dividers for {CPU,DDR}_PLL on AR934x MIPS: BCM63XX: Properly handle mac address octet overflow MIPS: Kconfig: Avoid build errors by hiding USE_OF from the user. MIPS: Replace `-' in defconfig filename wth `_' for consistency. MIPS: Wire kcmp syscall. MIPS: MIPSsim: Remove the MIPSsim platform. MIPS: NOTIFY_RESUME is not needed in TIF masks MIPS: Merge the identical "return from syscall" per-ABI code MIPS: Unobfuscate _TIF..._MASK MIPS: Prevent hitting do_notify_resume() with !user_mode(regs). MIPS: Replace 'kernel_uses_smartmips_rixi' with 'cpu_has_rixi'. MIPS: Add base architecture support for RI and XI. MIPS: Optimise TLB handlers for MIPS32/64 R2 cores. MIPS: uasm: Add INS and EXT instructions. MIPS: Avoid pipeline stalls on some MIPS32R2 cores. MIPS: Make VPE count to be one-based. MIPS: Add new end of interrupt functionality for GIC. MIPS: Add EIC support for GIC. MIPS: Code clean-ups for the GIC. ... 
Pull MIPS update from Ralf Baechle:
 "This is the MIPS update for 3.7.

  A fair chunk of them are platform updates to the Cavium Octeon SOC
  (which involves machine generated header files of considerable size),
  Atheros ATH79xx, RMI aka Netlogic aka Broadcom XLP, Broadcom BCM63xx
  platforms.

  Support for the commercial MIPS simulator MIPSsim has been removed as
  MIPS Technologies is shifting away from this product and Qemu is
  offering various more powerful platforms.  The generic MIPS code can
  now also probe for no-execute / write-only TLB features implemented
  without the full SmartMIPS extension as permitted by the latest MIPS
  processor architecture.  Lots of small changes to generic code."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (78 commits)
  MIPS: ath79: Fix CPU/DDR frequency calculation for SRIF PLLs
  MIPS: ath79: use correct fractional dividers for {CPU,DDR}_PLL on AR934x
  MIPS: BCM63XX: Properly handle mac address octet overflow
  MIPS: Kconfig: Avoid build errors by hiding USE_OF from the user.
  MIPS: Replace `-' in defconfig filename wth `_' for consistency.
  MIPS: Wire kcmp syscall.
  MIPS: MIPSsim: Remove the MIPSsim platform.
  MIPS: NOTIFY_RESUME is not needed in TIF masks
  MIPS: Merge the identical "return from syscall" per-ABI code
  MIPS: Unobfuscate _TIF..._MASK
  MIPS: Prevent hitting do_notify_resume() with !user_mode(regs).
  MIPS: Replace 'kernel_uses_smartmips_rixi' with 'cpu_has_rixi'.
  MIPS: Add base architecture support for RI and XI.
  MIPS: Optimise TLB handlers for MIPS32/64 R2 cores.
  MIPS: uasm: Add INS and EXT instructions.
  MIPS: Avoid pipeline stalls on some MIPS32R2 cores.
  MIPS: Make VPE count to be one-based.
  MIPS: Add new end of interrupt functionality for GIC.
  MIPS: Add EIC support for GIC.
  MIPS: Code clean-ups for the GIC.
  ...
Merge tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2012-10-07T11:55:16+00:00 Linus Torvalds torvalds@linux-foundation.org 2012-10-07T11:55:16+00:00 5e090ed7af10729a396a25df43d69a236e789736 Pull late ARM soc platform updates from Olof Johansson: "This branch contains updates to OMAP and Marvell platforms (kirkwood, dove, mvebu) that came in after we had done the big multiplatform merges, so they were kept separate from the rest, and not separated into the traditional topics of cleanup/driver/platform features. For OMAP, the updates are: - Runtime PM conversions for the GPMC and RNG IP blocks - Preparation patches for the OMAP common clock framework conversion - clkdev alias additions required by other drivers - Performance Monitoring Unit (PMU) support for OMAP2, 3, and non-4430 OMAP4 - OMAP hwmod code and data improvements - Preparation patches for the IOMMU runtime PM conversion - Preparation patches for OMAP4 full-chip retention support For Kirkwood/Dove/mvebu: - New driver for "address decoder controller" for mvebu, which is a piece of hardware that configures addressable devices and peripherals. First user is the boot rom aperture on armada XP since it is needed for SMP support. - New device tree bindings for peripherals such as gpio-fan, iconnect nand, mv_cesa and the above address decoder controller. - Some defconfig updates, mostly to enable new DT boards and a few drivers. - New drivers using the pincontrol subsystem for dove, kirkwood and mvebu - New clean gpio driver for mvebu" * tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (98 commits) ARM: mvebu: fix build breaks from multi-platform conversion ARM: OMAP4460/4470: PMU: Enable PMU for OMAP4460/70 ARM: OMAP2+: PMU: Add runtime PM support ARM: OMAP4430: PMU: prepare to create PMU device via HWMOD ARM: OMAP2+: PMU: Convert OMAP2/3 devices to use HWMOD ARM: OMAP3: hwmod data: Add debugss HWMOD data ARM: OMAP2+: clockdomain/hwmod: add workaround for EMU clockdomain idle problems ARM: OMAP: Add a timer attribute for timers that can interrupt the DSP hwrng: OMAP: remove SoC restrictions from driver registration ARM: OMAP: split OMAP1, OMAP2+ RNG device registration hwrng: OMAP: convert to use runtime PM hwrng: OMAP: store per-device data in per-device variables, not file statics ARM: OMAP2xxx: hwmod/CM: add RNG integration data ARM: OMAP2+: gpmc: minimal driver support ARM: OMAP2+: gpmc: Adapt to HWMOD ARM: OMAP2/3: hwmod data: add gpmc ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp ARM: OMAP3: hwmod data: add mmu data for iva and isp ARM: OMAP: iommu: fix including iommu.h without IOMMU_API selected ARM: OMAP4: hwmod data: add missing HWMOD_NO_IDLEST flags to some PRCM IP blocks ... 
Pull late ARM soc platform updates from Olof Johansson:
 "This branch contains updates to OMAP and Marvell platforms (kirkwood,
  dove, mvebu) that came in after we had done the big multiplatform
  merges, so they were kept separate from the rest, and not separated
  into the traditional topics of cleanup/driver/platform features.

  For OMAP, the updates are:
   - Runtime PM conversions for the GPMC and RNG IP blocks
   - Preparation patches for the OMAP common clock framework conversion
   - clkdev alias additions required by other drivers
   - Performance Monitoring Unit (PMU) support for OMAP2, 3, and
     non-4430 OMAP4
   - OMAP hwmod code and data improvements
   - Preparation patches for the IOMMU runtime PM conversion
   - Preparation patches for OMAP4 full-chip retention support

  For Kirkwood/Dove/mvebu:
   - New driver for "address decoder controller" for mvebu, which is a
     piece of hardware that configures addressable devices and
     peripherals.  First user is the boot rom aperture on armada XP
     since it is needed for SMP support.
   - New device tree bindings for peripherals such as gpio-fan, iconnect
     nand, mv_cesa and the above address decoder controller.
   - Some defconfig updates, mostly to enable new DT boards and a few
     drivers.
   - New drivers using the pincontrol subsystem for dove, kirkwood and
     mvebu
   - New clean gpio driver for mvebu"

* tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (98 commits)
  ARM: mvebu: fix build breaks from multi-platform conversion
  ARM: OMAP4460/4470: PMU: Enable PMU for OMAP4460/70
  ARM: OMAP2+: PMU: Add runtime PM support
  ARM: OMAP4430: PMU: prepare to create PMU device via HWMOD
  ARM: OMAP2+: PMU: Convert OMAP2/3 devices to use HWMOD
  ARM: OMAP3: hwmod data: Add debugss HWMOD data
  ARM: OMAP2+: clockdomain/hwmod: add workaround for EMU clockdomain idle problems
  ARM: OMAP: Add a timer attribute for timers that can interrupt the DSP
  hwrng: OMAP: remove SoC restrictions from driver registration
  ARM: OMAP: split OMAP1, OMAP2+ RNG device registration
  hwrng: OMAP: convert to use runtime PM
  hwrng: OMAP: store per-device data in per-device variables, not file statics
  ARM: OMAP2xxx: hwmod/CM: add RNG integration data
  ARM: OMAP2+: gpmc: minimal driver support
  ARM: OMAP2+: gpmc: Adapt to HWMOD
  ARM: OMAP2/3: hwmod data: add gpmc
  ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp
  ARM: OMAP3: hwmod data: add mmu data for iva and isp
  ARM: OMAP: iommu: fix including iommu.h without IOMMU_API selected
  ARM: OMAP4: hwmod data: add missing HWMOD_NO_IDLEST flags to some PRCM IP blocks
  ...
Merge tag 'pinctrl-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl 2012-10-02T23:20:20+00:00 Linus Torvalds torvalds@linux-foundation.org 2012-10-02T23:20:20+00:00 06fe918e9f177dc2a0592b0ad40a6ce4920b2033 Pull pinctrl changes from Linus Walleij: "Some of this stuff is hitting arch/arm/* and have been ACKed by the ARM SoC folks, or it's device tree bindings pertaining to the specific driver. These are the bulk pinctrl changes for kernel v3.7: - Add subdrivers for the DB8540 and NHK8815 Nomadik-type ASICs, provide platform config for the Nomadik. - Add a driver for the i.MX35. - Add a driver for the BCM2835, an advanced GPIO expander. - Various fixes and clean-ups and minor improvements for the core, Nomadik, pinctr-single, sirf drivers. - Some platform config for the ux500." * tag 'pinctrl-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (27 commits) pinctrl: add bcm2835 driver pinctrl: clarify idle vs sleep states pinctrl/nomadik: use irq_find_mapping() pinctrl: sirf: add lost chained_irq_enter and exit in sirfsoc_gpio_handle_irq pinctrl: sirf: initialize the irq_chip pointer of pinctrl_gpio_range pinctrl: sirf: fix spinlock deadlock in sirfsoc_gpio_set_input pinctrl: sirf: add missing pins to pinctrl list pinctrl: sirf: fix a typo in sirfsoc_gpio_probe pinctrl: pinctrl-single: add debugfs pin h/w state info ARM: ux500: 8500: update I2C sleep states pinctrl pinctrl: Fix potential memory leak in pinctrl_register_one_pin() ARM: ux500: tidy up pin sleep modes ARM: ux500: fix spi2 pin group pinctrl: imx: remove duplicated const pinctrl: document semantics vs GPIO ARM: ux500: 8500: use hsit_a_2 group for HSI pinctrl: use kasprintf() in pinmux_request_gpio() pinctrl: pinctrl-single: Add pinctrl-single,bits type of mux pinctrl/nomadik : add MC1_a_2 pin MC1 function group list pinctrl: pinctrl-single: Make sure we do not change bits outside of mask ... 
Pull pinctrl changes from Linus Walleij:
 "Some of this stuff is hitting arch/arm/* and have been ACKed by the
  ARM SoC folks, or it's device tree bindings pertaining to the specific
  driver.

  These are the bulk pinctrl changes for kernel v3.7:
   - Add subdrivers for the DB8540 and NHK8815 Nomadik-type ASICs,
     provide platform config for the Nomadik.
   - Add a driver for the i.MX35.
   - Add a driver for the BCM2835, an advanced GPIO expander.
   - Various fixes and clean-ups and minor improvements for the core,
     Nomadik, pinctr-single, sirf drivers.
   - Some platform config for the ux500."

* tag 'pinctrl-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (27 commits)
  pinctrl: add bcm2835 driver
  pinctrl: clarify idle vs sleep states
  pinctrl/nomadik: use irq_find_mapping()
  pinctrl: sirf: add lost chained_irq_enter and exit in sirfsoc_gpio_handle_irq
  pinctrl: sirf: initialize the irq_chip pointer of pinctrl_gpio_range
  pinctrl: sirf: fix spinlock deadlock in sirfsoc_gpio_set_input
  pinctrl: sirf: add missing pins to pinctrl list
  pinctrl: sirf: fix a typo in sirfsoc_gpio_probe
  pinctrl: pinctrl-single: add debugfs pin h/w state info
  ARM: ux500: 8500: update I2C sleep states pinctrl
  pinctrl: Fix potential memory leak in pinctrl_register_one_pin()
  ARM: ux500: tidy up pin sleep modes
  ARM: ux500: fix spi2 pin group
  pinctrl: imx: remove duplicated const
  pinctrl: document semantics vs GPIO
  ARM: ux500: 8500: use hsit_a_2 group for HSI
  pinctrl: use kasprintf() in pinmux_request_gpio()
  pinctrl: pinctrl-single: Add pinctrl-single,bits type of mux
  pinctrl/nomadik : add MC1_a_2 pin MC1 function group list
  pinctrl: pinctrl-single: Make sure we do not change bits outside of mask
  ...
pinctrl: add bcm2835 driver 2012-10-01T06:05:22+00:00 Simon Arlott simon@fire.lp0.eu 2012-09-28T04:10:11+00:00 e1b2dc70cd5b00e17c703163a463d82354b1cc76 The BCM2835 GPIO module is a combined GPIO controller, (GPIO) interrupt controller, and pinmux/control device. Original driver by Simon Arlott. Rewrite including GPIO chip device by Chris Boot. Upstreaming changes by Stephen Warren: * Wrote DT binding documentation. * Changed brcm,function to an integer to more directly match the datasheet, and to match brcm,pins being an integer. * Implemented pull-up/down pin config. * Removed read-only DT property and related code. The restriction this implemented are driven by the board, not the GPIO HW block, so don't really make sense of a HW block binding, were in general incomplete (since they could only know about the few pins hard-coded into the Raspberry Pi B board design and not the uncommitted GPIOS), and are better represented simply by not writing incorrect data into pin configuration nodes. * Don't set GPIO_IN function select in gpio_request_enable() to avoid glitches; defer this to gpio_set_direction(). Consequently, removed empty bcm2835_pmx_gpio_request_enable(). * Simplified enabled_irq_map[]; make it explicitly 1 entry per bank. * Lifted use of enabled_irq_map[] outside the per-interrupt loop in IRQ handler, thus fixing an issue where the code was indexing into enabled_irq_map[] by intra-bank GPIO ID, not global GPIO ID. * Removed locking in IRQ handler, since all other code uses spin_lock_irqsave() and so guarantees it doesn't run concurrently with the handler. * Moved duplicated BUILD_BUG_ON()s into probe(). Also check size of bcm2835_gpio_pins[]. * Remove range-checking from bcm2835_pctl_get_groups_count() since we've decided to trust the pinctrl core. * Made bcm2835_pmx_gpio_disable_free() call bcm2835_pinctrl_fsel_set() directly for simplicity. * Fixed body of dt_free_map() to match latest dt_node_to_map(). * Removed GPIO ownership check from bcm2835_pmx_enable() since the pinctrl core owns doing this. * Made irq_chip and pinctrl_gpio_range .name == MODULE_NAME so it's more descriptive. * Simplified remove(); removed call to non-existent pinctrl_remove_gpio_range(), remove early return on error. * Don't force gpiochip's base to 0. Set gpio_range.base to gpiochip's base GPIO number. * Error-handling cleanups in probe(). * Switched to module_platform_driver() rather than open-coding. * Made pin, group, and function names lower-case. * s/broadcom/brcm/ in DT property names. * s/2708/2835/. * Fixed a couple minor checkpatch warnings, and other minor cleanup. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Chris Boot <bootc@bootc.net> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The BCM2835 GPIO module is a combined GPIO controller, (GPIO) interrupt
controller, and pinmux/control device.

Original driver by Simon Arlott.
Rewrite including GPIO chip device by Chris Boot.

Upstreaming changes by Stephen Warren:
* Wrote DT binding documentation.
* Changed brcm,function to an integer to more directly match the
  datasheet, and to match brcm,pins being an integer.
* Implemented pull-up/down pin config.
* Removed read-only DT property and related code. The restriction this
  implemented are driven by the board, not the GPIO HW block, so don't
  really make sense of a HW block binding, were in general incomplete
  (since they could only know about the few pins hard-coded into the
  Raspberry Pi B board design and not the uncommitted GPIOS), and are
  better represented simply by not writing incorrect data into pin
  configuration nodes.
* Don't set GPIO_IN function select in gpio_request_enable() to avoid
  glitches; defer this to gpio_set_direction(). Consequently, removed
  empty bcm2835_pmx_gpio_request_enable().
* Simplified enabled_irq_map[]; make it explicitly 1 entry per bank.
* Lifted use of enabled_irq_map[] outside the per-interrupt loop in
  IRQ handler, thus fixing an issue where the code was indexing into
  enabled_irq_map[] by intra-bank GPIO ID, not global GPIO ID.
* Removed locking in IRQ handler, since all other code uses
  spin_lock_irqsave() and so guarantees it doesn't run concurrently
  with the handler.
* Moved duplicated BUILD_BUG_ON()s into probe(). Also check size of
  bcm2835_gpio_pins[].
* Remove range-checking from bcm2835_pctl_get_groups_count() since we've
  decided to trust the pinctrl core.
* Made bcm2835_pmx_gpio_disable_free() call bcm2835_pinctrl_fsel_set()
  directly for simplicity.
* Fixed body of dt_free_map() to match latest dt_node_to_map().
* Removed GPIO ownership check from bcm2835_pmx_enable() since the pinctrl
  core owns doing this.
* Made irq_chip and pinctrl_gpio_range .name == MODULE_NAME so it's more
  descriptive.
* Simplified remove(); removed call to non-existent
  pinctrl_remove_gpio_range(), remove early return on error.
* Don't force gpiochip's base to 0. Set gpio_range.base to gpiochip's
  base GPIO number.
* Error-handling cleanups in probe().
* Switched to module_platform_driver() rather than open-coding.
* Made pin, group, and function names lower-case.
* s/broadcom/brcm/ in DT property names.
* s/2708/2835/.
* Fixed a couple minor checkpatch warnings, and other minor cleanup.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Chris Boot <bootc@bootc.net>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: mvebu: add pinctrl driver for Armada XP 2012-09-22T14:50:20+00:00 Thomas Petazzoni thomas.petazzoni@free-electrons.com 2012-09-13T15:41:47+00:00 463e270f766aa8dd2b782d4b8bd87260eb595aa2 This pinctrl driver is not a full-blown pinctrl driver from scratch: it relies on the common pinctrl-mvebu driver, which is used for all Marvell EBU SoCs. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net> 
This pinctrl driver is not a full-blown pinctrl driver from scratch:
it relies on the common pinctrl-mvebu driver, which is used for all
Marvell EBU SoCs.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
pinctrl: mvebu: add pinctrl driver for Armada 370 2012-09-22T14:50:19+00:00 Thomas Petazzoni thomas.petazzoni@free-electrons.com 2012-09-13T15:41:46+00:00 5f597bb2be5723e1ea5d3337337f671ced4f37bf This pinctrl driver is not a full-blown pinctrl driver from scratch: it relies on the common pinctrl-mvebu driver, which is used for all Marvell EBU SoCs. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net> 
This pinctrl driver is not a full-blown pinctrl driver from scratch:
it relies on the common pinctrl-mvebu driver, which is used for all
Marvell EBU SoCs.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
pinctrl: mvebu: kirkwood pinctrl driver 2012-09-22T14:50:17+00:00 Sebastian Hesselbarth sebastian.hesselbarth@gmail.com 2012-09-13T15:41:45+00:00 9d4b1632bcd77f7fb98c4c5c1f4f2fc70fa1aa23 This patch adds a SoC specific pinctrl driver for Marvell Kirkwood SoCs plus DT binding documentation. This driver will use the mvebu pinctrl driver core. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net> 
This patch adds a SoC specific pinctrl driver for Marvell Kirkwood SoCs
plus DT binding documentation. This driver will use the mvebu pinctrl
driver core.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Stephen Warren <swarren@wwwdotorg.org>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
pinctrl: mvebu: dove pinctrl driver 2012-09-22T14:50:16+00:00 Sebastian Hesselbarth sebastian.hesselbarth@gmail.com 2012-09-13T15:41:44+00:00 c9f95cedfea088ec9bbcef3b8064d5275297b159 This patch adds a SoC specific pinctrl driver for Marvell Dove SoCs plus DT binding documentation. This driver will use the mvebu pinctrl driver core. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net> 
This patch adds a SoC specific pinctrl driver for Marvell Dove SoCs
plus DT binding documentation. This driver will use the mvebu pinctrl
driver core.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
pinctrl: mvebu: pinctrl driver core 2012-09-22T14:50:14+00:00 Sebastian Hesselbarth sebastian.hesselbarth@gmail.com 2012-09-13T15:41:43+00:00 7e8d941567c99a03390154a7bb116d1b03db82b3 This patch adds a pinctrl driver core for Marvell SoCs plus DT binding documentation. This core driver will be used by SoC family specific drivers, i.e. Armada XP, Armada 370, Dove, Kirkwood, aso. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Conflicts: arch/arm/Kconfig 
This patch adds a pinctrl driver core for Marvell SoCs plus DT
binding documentation. This core driver will be used by SoC family
specific drivers, i.e. Armada XP, Armada 370, Dove, Kirkwood, aso.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Conflicts:

	arch/arm/Kconfig
OF: pinctrl: MIPS: lantiq: adds support for FALCON SoC 2012-09-13T08:30:58+00:00 John Crispin blogic@openwrt.org 2012-05-19T22:33:56+00:00 e316cb2b16bbfbe48387b56e7e6b5d32ec686f82 Implement support for pinctrl on lantiq/falcon socs. The FALCON has 5 banks of up to 32 pins. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Thomas Langer <thomas.langer@lantiq.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: devicetree-discuss@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org 
Implement support for pinctrl on lantiq/falcon socs. The FALCON has 5 banks
of up to 32 pins.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: devicetree-discuss@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org