linux-toradex.git/drivers/pinctrl/aspeed/pinctrl-aspeed.c, branch v6.0-rc7 Linux kernel for Apalis and Colibri modules pinctrl: aspeed: Fix potential NULL dereference in aspeed_pinmux_set_mux() 2022-06-15T13:19:57+00:00 Haowen Bai baihaowen@meizu.com 2022-04-21T02:26:59+00:00 84a85d3fef2e75b1fe9fc2af6f5267122555a1ed pdesc could be null but still dereference pdesc->name and it will lead to a null pointer access. So we move a null check before dereference. Signed-off-by: Haowen Bai <baihaowen@meizu.com> Link: https://lore.kernel.org/r/1650508019-22554-1-git-send-email-baihaowen@meizu.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
pdesc could be null but still dereference pdesc->name and it will lead to
a null pointer access. So we move a null check before dereference.

Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Link: https://lore.kernel.org/r/1650508019-22554-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: aspeed: placate kernel-doc warnings 2021-08-10T13:29:44+00:00 Randy Dunlap rdunlap@infradead.org 2021-07-23T03:48:40+00:00 5fa9d19b3fb640e3616de2a7615236c0cc45e702 Eliminate kernel-doc warnings in drivers/pinctrl/aspeed by using proper kernel-doc notation. Fixes these kernel-doc warnings: drivers/pinctrl/aspeed/pinmux-aspeed.c:61: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Query the enabled or disabled state for a mux function's signal on a pin drivers/pinctrl/aspeed/pinctrl-aspeed.c:135: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Search for the signal expression needed to enable the pin's signal for the Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Aditya Srivastava <yashsri421@gmail.com> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: linux-aspeed@lists.ozlabs.org Cc: openbmc@lists.ozlabs.org Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Acked-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210723034840.8752-1-rdunlap@infradead.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Eliminate kernel-doc warnings in drivers/pinctrl/aspeed by using
proper kernel-doc notation.

Fixes these kernel-doc warnings:

drivers/pinctrl/aspeed/pinmux-aspeed.c:61: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
    * Query the enabled or disabled state for a mux function's signal on a pin
drivers/pinctrl/aspeed/pinctrl-aspeed.c:135: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
    * Search for the signal expression needed to enable the pin's signal for the

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Aditya Srivastava <yashsri421@gmail.com>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: linux-aspeed@lists.ozlabs.org
Cc: openbmc@lists.ozlabs.org
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210723034840.8752-1-rdunlap@infradead.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: aspeed: Fix minor documentation error 2021-05-19T00:11:18+00:00 Souptick Joarder jrdr.linux@gmail.com 2021-04-25T12:26:24+00:00 333944c7c3759c546035f1f9b0b4c72bdc5b7878 Kernel test robot throws below warning -> drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c:2705: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c:2614: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/pinctrl/aspeed/pinctrl-aspeed.c:111: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/pinctrl/aspeed/pinmux-aspeed.c:24: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Fix minor documentation error. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/1619353584-8196-1-git-send-email-jrdr.linux@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Kernel test robot throws below warning ->

drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c:2705: warning: This comment
starts with '/**', but isn't a kernel-doc comment. Refer
Documentation/doc-guide/kernel-doc.rst
drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c:2614: warning: This comment
starts with '/**', but isn't a kernel-doc comment. Refer
Documentation/doc-guide/kernel-doc.rst
drivers/pinctrl/aspeed/pinctrl-aspeed.c:111: warning: This comment
starts with '/**', but isn't a kernel-doc comment. Refer
Documentation/doc-guide/kernel-doc.rst
drivers/pinctrl/aspeed/pinmux-aspeed.c:24: warning: This comment starts
with '/**', but isn't a kernel-doc comment. Refer
Documentation/doc-guide/kernel-doc.rst

Fix minor documentation error.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/1619353584-8196-1-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: aspeed: Fix GPIO requests on pass-through banks 2020-12-08T08:23:51+00:00 Andrew Jeffery andrew@aj.id.au 2020-11-26T06:33:37+00:00 7aeb353802611a8e655e019f09a370ff682af1a6 Commit 6726fbff19bf ("pinctrl: aspeed: Fix GPI only function problem.") fixes access to GPIO banks T and U on the AST2600. Both banks contain input-only pins and the GPIO pin function is named GPITx and GPIUx respectively. Unfortunately the fix had a negative impact on GPIO banks D and E for the AST2400 and AST2500 where the GPIO pass-through functions take similar "GPI"-style names. The net effect on the older SoCs was that when the GPIO subsystem requested a pin in banks D or E be muxed for GPIO, they were instead muxed for pass-through mode. Mistakenly muxing pass-through mode e.g. breaks booting the host on IBM's Witherspoon (AC922) platform where GPIOE0 is used for FSI. Further exploit the names in the provided expression structure to differentiate pass-through from pin-specific GPIO modes. This follow-up fix gives the expected behaviour for the following tests: Witherspoon BMC (AST2500): 1. Power-on the Witherspoon host 2. Request GPIOD1 be muxed via /sys/class/gpio/export 3. Request GPIOE1 be muxed via /sys/class/gpio/export 4. Request the balls for GPIOs E2 and E3 be muxed as GPIO pass-through ("GPIE2" mode) via a pinctrl hog in the devicetree Rainier BMC (AST2600): 5. Request GPIT0 be muxed via /sys/class/gpio/export 6. Request GPIU0 be muxed via /sys/class/gpio/export Together the tests demonstrate that all three pieces of functionality (general GPIOs via 1, 2 and 3, input-only GPIOs via 5 and 6, pass-through mode via 4) operate as desired across old and new SoCs. Fixes: 9b92f5c51e9a ("pinctrl: aspeed: Fix GPI only function problem.") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Tested-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Cc: Billy Tsai <billy_tsai@aspeedtech.com> Cc: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201126063337.489927-1-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Commit 6726fbff19bf ("pinctrl: aspeed: Fix GPI only function problem.")
fixes access to GPIO banks T and U on the AST2600. Both banks contain
input-only pins and the GPIO pin function is named GPITx and GPIUx
respectively. Unfortunately the fix had a negative impact on GPIO banks
D and E for the AST2400 and AST2500 where the GPIO pass-through
functions take similar "GPI"-style names. The net effect on the older
SoCs was that when the GPIO subsystem requested a pin in banks D or E be
muxed for GPIO, they were instead muxed for pass-through mode.
Mistakenly muxing pass-through mode e.g. breaks booting the host on
IBM's Witherspoon (AC922) platform where GPIOE0 is used for FSI.

Further exploit the names in the provided expression structure to
differentiate pass-through from pin-specific GPIO modes.

This follow-up fix gives the expected behaviour for the following tests:

Witherspoon BMC (AST2500):

1. Power-on the Witherspoon host
2. Request GPIOD1 be muxed via /sys/class/gpio/export
3. Request GPIOE1 be muxed via /sys/class/gpio/export
4. Request the balls for GPIOs E2 and E3 be muxed as GPIO pass-through
   ("GPIE2" mode) via a pinctrl hog in the devicetree

Rainier BMC (AST2600):

5. Request GPIT0 be muxed via /sys/class/gpio/export
6. Request GPIU0 be muxed via /sys/class/gpio/export

Together the tests demonstrate that all three pieces of functionality
(general GPIOs via 1, 2 and 3, input-only GPIOs via 5 and 6, pass-through
mode via 4) operate as desired across old and new SoCs.

Fixes: 9b92f5c51e9a ("pinctrl: aspeed: Fix GPI only function problem.")
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Cc: Billy Tsai <billy_tsai@aspeedtech.com>
Cc: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201126063337.489927-1-andrew@aj.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: aspeed: Fix GPI only function problem. 2020-11-05T14:32:58+00:00 Billy Tsai billy_tsai@aspeedtech.com 2020-10-30T05:54:50+00:00 9b92f5c51e9a41352d665f6f956bd95085a56a83 Some gpio pin at aspeed soc is input only and the prefix name of these pin is "GPI" only. This patch fine-tune the condition of GPIO check from "GPIO" to "GPI" and it will fix the usage error of banks D and E in the AST2400/AST2500 and banks T and U in the AST2600. Fixes: 4d3d0e4272d8 ("pinctrl: Add core support for Aspeed SoCs") Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20201030055450.29613-1-billy_tsai@aspeedtech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Some gpio pin at aspeed soc is input only and the prefix name of these
pin is "GPI" only.
This patch fine-tune the condition of GPIO check from "GPIO" to "GPI"
and it will fix the usage error of banks D and E in the AST2400/AST2500
and banks T and U in the AST2600.

Fixes: 4d3d0e4272d8 ("pinctrl: Add core support for Aspeed SoCs")
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20201030055450.29613-1-billy_tsai@aspeedtech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: aspeed: Use the right pinconf mask 2020-09-29T12:38:44+00:00 Andrew Jeffery andrew@aj.id.au 2020-09-10T02:56:30+00:00 1d6db5ae6b090d1a8edfcb36b9bf47c5f4fe27f6 The Aspeed pinconf data structures are split into 'conf' and 'map' types, where the 'conf' struct defines which register and bitfield to manipulate, while the 'map' struct defines what value to write to the register and bitfield. Both structs have a mask member, and the wrong mask was being used to tell the regmap which bits to update. A todo is to look at whether we can remove the mask from the 'map' struct. Fixes: 5f52c853847f ("pinctrl: aspeed: Use masks to describe pinconf bitfields") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Cc: Johnny Huang <johnny_huang@aspeedtech.com> Link: https://lore.kernel.org/r/20200910025631.2996342-3-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The Aspeed pinconf data structures are split into 'conf' and 'map'
types, where the 'conf' struct defines which register and bitfield to
manipulate, while the 'map' struct defines what value to write to
the register and bitfield.

Both structs have a mask member, and the wrong mask was being used to
tell the regmap which bits to update.

A todo is to look at whether we can remove the mask from the 'map'
struct.

Fixes: 5f52c853847f ("pinctrl: aspeed: Use masks to describe pinconf bitfields")
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Cc: Johnny Huang <johnny_huang@aspeedtech.com>
Link: https://lore.kernel.org/r/20200910025631.2996342-3-andrew@aj.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: aspeed: Format pinconf debug consistent with pinmux 2020-09-29T12:38:44+00:00 Andrew Jeffery andrew@aj.id.au 2020-09-10T02:56:29+00:00 7e8d8ac78f35b2fc8cb1548f4ea5f5d9eaf3b3f8 When displaying which pinconf register and field is being touched, format the field mask so that it's consistent with the way the pinmux portion formats the mask. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200910025631.2996342-2-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
When displaying which pinconf register and field is being touched,
format the field mask so that it's consistent with the way the pinmux
portion formats the mask.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20200910025631.2996342-2-andrew@aj.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: aspeed: Improve debug output 2020-07-16T08:31:09+00:00 Andrew Jeffery andrew@aj.id.au 2020-07-01T03:00:39+00:00 aa639e4437046a2519779932d8aa8842b517e20f We need to iterate over each pin in a group for a function and disable higher priority mux configurations on the pin before finally muxing the relevant function's signal. With the current debug output it is hard to track what register output is relevant to which operation, so break up the actions in the debug output by providing some more context. Before: [ 5.446656] aspeed-g6-pinctrl 1e6e2000.syscon:pinctrl: request pin 37 (B26) for 1e780000.gpio:341 [ 5.447377] Want SCU414[0x00000020]=0x1, got 0x0 from 0x00000000 [ 5.447854] Want SCU4B4[0x00000020]=0x1, got 0x0 from 0x00000000 [ 5.448340] Want SCU4B4[0x00000020]=0x1, got 0x0 from 0x00000000 After: [ 5.298053] Muxing pin 37 for GPIO [ 5.298294] Disabling signal NRI4 for NRI4 [ 5.298593] Want SCU414[0x00000020]=0x1, got 0x0 from 0x00000000 [ 5.298983] Disabling signal RGMII4RXD1 for RGMII4 [ 5.299309] Want SCU4B4[0x00000020]=0x1, got 0x0 from 0x00000000 [ 5.299694] Disabling signal RMII4RXD1 for RMII4 [ 5.300014] Want SCU4B4[0x00000020]=0x1, got 0x0 from 0x00000000 [ 5.300396] Enabling signal GPIOE5 for GPIOE5 [ 5.300687] Muxed pin 37 as GPIOE5 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200701030039.2834418-1-joel@jms.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
We need to iterate over each pin in a group for a function and
disable higher priority mux configurations on the pin before finally
muxing the relevant function's signal. With the current debug output it
is hard to track what register output is relevant to which operation, so
break up the actions in the debug output by providing some more context.

Before:

    [    5.446656] aspeed-g6-pinctrl 1e6e2000.syscon:pinctrl: request pin 37 (B26) for 1e780000.gpio:341
    [    5.447377] Want SCU414[0x00000020]=0x1, got 0x0 from 0x00000000
    [    5.447854] Want SCU4B4[0x00000020]=0x1, got 0x0 from 0x00000000
    [    5.448340] Want SCU4B4[0x00000020]=0x1, got 0x0 from 0x00000000

After:

    [    5.298053] Muxing pin 37 for GPIO
    [    5.298294] Disabling signal NRI4 for NRI4
    [    5.298593] Want SCU414[0x00000020]=0x1, got 0x0 from 0x00000000
    [    5.298983] Disabling signal RGMII4RXD1 for RGMII4
    [    5.299309] Want SCU4B4[0x00000020]=0x1, got 0x0 from 0x00000000
    [    5.299694] Disabling signal RMII4RXD1 for RMII4
    [    5.300014] Want SCU4B4[0x00000020]=0x1, got 0x0 from 0x00000000
    [    5.300396] Enabling signal GPIOE5 for GPIOE5
    [    5.300687] Muxed pin 37 as GPIOE5

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20200701030039.2834418-1-joel@jms.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: aspeed: Use masks to describe pinconf bitfields 2019-12-13T08:40:37+00:00 Johnny Huang johnny_huang@aspeedtech.com 2019-12-02T06:14:31+00:00 5f52c853847ffdc9654e5b685e1a1ae5bee83e65 Since some of the AST2600 pinconf setting are not just single bit, modified aspeed_pin_config @bit to @mask and add @mask to aspeed_pin_config_map to support configuring multiple bits. Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> [AJ: Tweak commit message] Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191202061432.3996-7-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Since some of the AST2600 pinconf setting are not just single bit, modified
aspeed_pin_config @bit to @mask and add @mask to aspeed_pin_config_map to
support configuring multiple bits.

Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com>
[AJ: Tweak commit message]
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20191202061432.3996-7-andrew@aj.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: aspeed: Move aspeed_pin_config_map to separate source file 2019-12-13T08:40:07+00:00 Johnny Huang johnny_huang@aspeedtech.com 2019-12-02T06:14:30+00:00 5b854f2842458d2bbb2a49c20d958c9f6f610465 The AST2600 pinconf differs from the 2400 and 2500, aspeed_pin_config_map should define separately, and add @confmaps and @nconfmaps to aspeed_pinctrl_data structure for that change. Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191202061432.3996-6-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The AST2600 pinconf differs from the 2400 and 2500, aspeed_pin_config_map
should define separately, and add @confmaps and @nconfmaps to
aspeed_pinctrl_data structure for that change.

Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20191202061432.3996-6-andrew@aj.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>