linux-toradex.git/drivers/pinctrl/berlin/berlin-bg2cd.c, branch v6.11

pinctrl: Use device_get_match_data()

2023-10-30T13:50:42+00:00

Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.

Signed-off-by: Rob Herring 
Reviewed-by: Florian Fainelli 
Link: https://lore.kernel.org/r/20231009172923.2457844-18-robh@kernel.org
Signed-off-by: Linus Walleij

pinctrl: berlin: switch to SPDX license identifier

2018-05-23T09:45:23+00:00

Use the appropriate SPDX license identifier in the berlin pinctrl
driver source file and drop the previous license text.

Signed-off-by: Jisheng Zhang 
Signed-off-by: Linus Walleij

pinctrl: berlin: make bool drivers explicitly non-modular

2017-02-13T13:25:55+00:00

None of the Kconfigs for any of these drivers are tristate,
meaning that they currently are not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: "Antoine Ténart" 
Cc: Sebastian Hesselbarth 
Cc: Hongzhou Yang 
Cc: Thomas Hebb 
Cc: Masahiro Yamada 
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Paul Gortmaker 
Acked-by: Jisheng Zhang 
Signed-off-by: Linus Walleij

pinctrl: berlin: fix BG2CD field widths

2015-10-16T14:42:48+00:00

The previous register layout was incorrect, many of the fields having
fewer bits than were needed to represent all their modes. The new layout
is taken from the bootloader source of a BG2CD device.

Signed-off-by: Thomas Hebb 
Acked-by: Sebastian Hesselbarth 
Signed-off-by: Linus Walleij

pinctrl: berlin: fix my family name spelling

2015-10-16T14:28:57+00:00

My family name contained an accent when I submitted the
Berlin pinctrl series in the first place. There was an
encoding issue when the series was applied. Fix this.

Signed-off-by: Antoine Ténart 
Acked-by: Sebastian Hesselbarth 
[Je me rendis tous les accents aigus]
Signed-off-by: Linus Walleij

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2015-06-26T18:54:29+00:00

Pull ARM SoC driver updates from Kevin Hilman:
 "Some of these are for drivers/soc, where we're now putting
  SoC-specific drivers these days.  Some are for other driver subsystems
  where we have received acks from the appropriate maintainers.

  Some highlights:

   - simple-mfd: document DT bindings and misc updates
   - migrate mach-berlin to simple-mfd for clock, pinctrl and reset
   - memory: support for Tegra132 SoC
   - memory: introduce tegra EMC driver for scaling memory frequency
   - misc. updates for ARM CCI and CCN busses"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  drivers: soc: sunxi: Introduce SoC driver to map SRAMs
  arm-cci: Add aliases for PMU events
  arm-cci: Add CCI-500 PMU support
  arm-cci: Sanitise CCI400 PMU driver specific code
  arm-cci: Abstract handling for CCI events
  arm-cci: Abstract out the PMU counter details
  arm-cci: Cleanup PMU driver code
  arm-cci: Do not enable CCI-400 PMU by default
  firmware: qcom: scm: Add HDCP Support
  ARM: berlin: add an ADC node for the BG2Q
  ARM: berlin: remove useless chip and system ctrl compatibles
  clk: berlin: drop direct of_iomap of nodes reg property
  ARM: berlin: move BG2Q clock node
  ARM: berlin: move BG2CD clock node
  ARM: berlin: move BG2 clock node
  clk: berlin: prepare simple-mfd conversion
  pinctrl: berlin: drop SoC stub provided regmap
  ARM: berlin: move pinctrl to simple-mfd nodes
  pinctrl: berlin: prepare to use regmap provided by syscon
  reset: berlin: drop arch_initcall initialization
  ...

pinctrl: berlin: comment the spi functions

2015-06-10T07:17:43+00:00

Add comments for the SPI functions, to distinguish CLK, SDI, SDO and
C{0,1,2,3}n.

Signed-off-by: Antoine Tenart 
Signed-off-by: Linus Walleij

pinctrl: berlin: fix spi1 SS0n function name

2015-06-10T07:15:27+00:00

Rename function ss0 to spi1 to be consistent with the other Berlin
function names.

Signed-off-by: Antoine Tenart 
Signed-off-by: Linus Walleij

pinctrl: berlin: drop SoC stub provided regmap

2015-05-18T16:10:08+00:00

With convertsion to simple-mfd sub-nodes, drop the regmap registration
by SoC stubs.

Signed-off-by: Antoine Tenart 
Acked-by: Linus Walleij 
Signed-off-by: Sebastian Hesselbarth

pinctrl: berlin: prepare to use regmap provided by syscon

2015-05-18T15:52:46+00:00

The Berlin pin controller nodes will be simple-mfd probed sub-nodes of
soc-controller and system-controller nodes. The register bank is managed
by syscon, which provides a regmap.

Prepare to get the regmap from syscon parent node instead of SoC stub
provided regmap.

Signed-off-by: Antoine Tenart 
Acked-by: Linus Walleij 
Signed-off-by: Sebastian Hesselbarth