linux-toradex.git/drivers/pinctrl/pinctrl-sunxi-pins.h, branch master

pinctrl: sunxi: Move the Allwinner pinctrl driver to its own directory

2014-05-04T06:59:43+00:00

This will allow to create numerous files without crippling the main pinctrl
directory.

Signed-off-by: Maxime Ripard

pinctrl: sunxi: define A31 R_PIO pin functions

2014-04-22T11:45:08+00:00

The A31 SoC provides both PL and PM pio bank through the R_PIO block.

These pins all support gpio function and can bbe assigned to system
peripherals (like TWI, P2WI, JTAG, ...)

Signed-off-by: Boris BREZILLON 
Acked-by: Maxime Ripard 
Signed-off-by: Linus Walleij

pinctrl-sunxi: Fix sun5i-a13 port F multiplexing

2014-02-25T09:49:14+00:00

The correct value for selecting the mmc0 function on port F pins is 2 not 4,
as per the data-sheet:
http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf

Signed-off-by: Hans de Goede 
Acked-by: Maxime Ripard 
Signed-off-by: Linus Walleij

pinctrl: sunxi: Add Allwinner A20 clock output pin functions

2014-01-08T09:46:28+00:00

This patch adds the clock output pin functions on the A20.
The 2 pins can output a configurable clock to be used by
external modules. This is used on the CubieTruck, to supply
a 32768 Hz low power clock to the onboard Wifi+BT module.

Signed-off-by: Chen-Yu Tsai 
Acked-by: Maxime Ripard 
Signed-off-by: Linus Walleij

pinctrl: sunxi: Add Allwinner A20 pins set

2013-08-23T06:56:30+00:00

The Allwinner A20 is pin-compatible with the older A10, so the two pin
set are quite similar. However, since the A20 has new features, we can't
just use the A10 pin set as is, and we need to define our own for the
A20.

Signed-off-by: Maxime Ripard 
Cc: Linus Walleij 
Signed-off-by: Linus Walleij

pinctrl: sunxi: Add Allwinner A31 pins set

2013-08-23T06:56:29+00:00

The Allwinner A31 SoC uses the same IP than the one found in the
A10/A13, with only different pins. Add the pins and the associated
functions found in the A31.

Signed-off-by: Maxime Ripard 
Cc: Linus Walleij 
Signed-off-by: Linus Walleij

pinctrl: sunxi: Fix inconsistent indentation

2013-08-23T06:56:29+00:00

Some pin functions in the array were not indented like the other
functions in this array. Fix this.

Signed-off-by: Maxime Ripard 
Cc: Linus Walleij 
Signed-off-by: Linus Walleij

pinctrl: sunxi: Add Allwinner A10s pins

2013-06-17T16:18:33+00:00

Signed-off-by: Maxime Ripard 
Signed-off-by: Linus Walleij

pinctrl: sunxi: Move the pins definitions to a separate header

2013-06-17T16:18:32+00:00

It will allow us to have a cleaner separation between the data needed by
the driver to work, and the core logic of the driver in itself, and will
allow having too much noise in the core driver in the future.

Signed-off-by: Maxime Ripard 
Signed-off-by: Linus Walleij