linux-toradex.git/drivers/pinctrl/pinctrl-tegra-xusb.c, branch v4.4.13

pinctrl: tegra-xusb: Correct lane mux options

2015-10-27T16:06:23+00:00

The description of the XUSB_PADCTL_USB3_PAD_MUX_0 register in the Tegra124
documentation implies that all functions (pcie, usb3 and sata) can be
muxed onto to all lanes (pcie lanes 0-4 and sata lane 0). However, it has
been confirmed that this is not the case and the mux'ing options much more
limited. Unfortunately, the public documentation has not been updated to
reflect this and so detail the actual mux'ing options here by function:

Function:		Lanes:
pcie1 x2:		pcie3, pcie4
pcie1 x4:		pcie1, pcie2, pcie3, pcie4
pcie2 x1 (option1):	pcie0
pcie2 x1 (option2):	pcie2
usb3 port 0:		pcie0
usb3 port 1 (option 1):	pcie1
usb3 port 1 (option 2):	sata0
sata:			sata0

Signed-off-by: Jon Hunter 
Acked-by: Stephen Warren 
Signed-off-by: Linus Walleij

pinctrl: make pinctrl_register() return proper error code

2015-06-10T12:49:52+00:00

Currently, pinctrl_register() just returns NULL on error, so the
callers can not know the exact reason of the failure.

Some of the pinctrl drivers return -EINVAL, some -ENODEV, and some
-ENOMEM on error of pinctrl_register(), although the error code
might be different from the real cause of the error.

This commit reworks pinctrl_register() to return the appropriate
error code and modifies all of the pinctrl drivers to use IS_ERR()
for the error checking and PTR_ERR() for getting the error code.

Signed-off-by: Masahiro Yamada 
Acked-by: Patrice Chotard 
Acked-by: Thierry Reding 
Acked-by: Heiko Stuebner 
Tested-by: Mika Westerberg 
Acked-by: Mika Westerberg 
Acked-by: Lee Jones 
Acked-by: Sören Brinkmann 
Acked-by: Laurent Pinchart 
Acked-by: Ray Jui 
Acked-by: Antoine Tenart 
Acked-by: Hongzhou Yang 
Acked-by: Wei Chen 
Signed-off-by: Linus Walleij

pinctrl: tegra-xusb: Fix allocation of pins

2015-06-01T11:57:05+00:00

Commit e5b3b2d9ed20 ("pinctrl: allows not to define the get_group_pins
operation") allows pin controllers not to register the get_group_pins()
function. However, a side-effect of not registering this function is
that pins are not allocated and potentially multiple devices could
attempt to configure the same pins [1]. Although this problem exists in
the pinctrl core, because only a few devices are impacted by this, fix
this for tegra-xusb by adding the get_group_pins() function.

Please note that in addition to adding the get_group_pins() functions
the pins/lanes for the tegra-xusb also need to be registered when
calling pinctrl_register(). This also allows the current pinmux state
to be viewed by the debugfs node "pinmux-pins" for the tegra-xusb pad
controller.

[1] http://www.spinics.net/lists/linux-gpio/msg05810.html

Signed-off-by: Jon Hunter 
Acked-by: Thierry Reding 
Signed-off-by: Linus Walleij

pinctrl: tegra-xusb: Remove unused structure

2015-06-01T11:55:45+00:00

The structure tegra_xusb_padctl_group is defined but never used and so
remove this.

Signed-off-by: Jon Hunter 
Acked-by: Thierry Reding 
Signed-off-by: Linus Walleij

Merge tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2014-12-14T22:57:16+00:00

Pull USB updates from Greg KH:
 "Here's the big set of USB and PHY patches for 3.19-rc1.

  The normal churn in the USB gadget area is in here, as well as xhci
  and other individual USB driver updates.  The PHY tree is also in
  here, as there were dependancies on the USB tree.

  All of these have been in linux-next"

* tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (351 commits)
  arm: omap3: twl: remove usb phy init data
  usbip: fix error handling in stub_probe()
  usb: gadget: udc: missing curly braces
  USB: mos7720: delete some unneeded code
  wusb: replace memset by memzero_explicit
  usbip: remove unneeded structure
  usb: xhci: fix comment for PORT_DEV_REMOVE
  xhci: don't use the same variable for stopped and halted rings current TD
  xhci: clear extra bits from slot context when setting max exit latency
  xhci: cleanup finish_td function
  USB: adutux: NULL dereferences on disconnect
  usb: chipidea: fix platform_no_drv_owner.cocci warnings
  usb: chipidea: Fixed a few typos in comments
  Documentation: bindings: add doc for the USB2 ChipIdea USB driver
  usb: chipidea: add a usb2 driver for ci13xxx
  usb: chipidea: fix phy handling
  usb: chipidea: remove duplicate dev_set_drvdata for host_start
  usb: chipidea: parameter 'mode' isn't needed for hw_device_reset
  usb: chipidea: add controller reset API
  usb: chipidea: remove flag CI_HDRC_REQUIRE_TRANSCEIVER
  ...

phy: remove the old lookup method

2014-11-22T08:28:39+00:00

The users of the old method are now converted to the new one.

Signed-off-by: Heikki Krogerus 
[ kishon@ti.com : made phy-berlin-usb.c and phy-miphy28lp.c to use the updated
		  devm_phy_create API.]
Signed-off-by: Kishon Vijay Abraham I

pinctrl: tegra-xusb: Don't leak configurations

2014-10-28T15:59:31+00:00

The pinctrl config helpers make a separate copy of the configuration, so
callers must make sure to free any dynamically allocated memory that was
used to store it.

Signed-off-by: Thierry Reding 
Signed-off-by: Linus Walleij

Merge tag 'pinctrl-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2014-10-08T00:56:28+00:00

Pull pin control changes from Linus Walleij:
 "This is the bulk of pin control changes for the v3.18 development
  series:

   - New drivers for the Freescale i.MX21, Qualcomm APQ8084 pin
     controllers.

   - Incremental new features on the Rockchip, atlas 6, OMAP, AM437x,
     APQ8064, prima2, AT91, Tegra, i.MX, Berlin and Nomadik.

   - Push Freescale drivers down into their own subdirectory.

   - Assorted sprays of syntax and semantic fixes"

* tag 'pinctrl-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (48 commits)
  pinctrl: specify bindings for pins and groups
  pinctrl: nomadik: improve GPIO debug prints
  pinctrl: abx500: refactor DT parser to take two paths
  pinctrl: abx500: use helpers for map allocation/free
  pinctrl: alter device tree bindings for functions
  pinctrl: nomadik: refactor DT parser to take two paths
  pinctrl: nomadik: use utils map free function
  pinctrl: nomadik: use util function to reserve maps
  pinctrl: qcom: use restart_notifier mechanism for ps_hold
  pinctrl: sh-pfc: sh73a0: Remove unnecessary SoC data allocation
  pinctrl: berlin: fix the dt_free_map function
  pinctrl: at91: disable PD or PU before enabling PU or PD
  pinctrl: st: remove gpiochip in failure cases
  pinctrl: at91: Fix error handling while doing gpiochio_irqchip_add
  pinctrl: at91: Fix failure path in at91_gpio_probe path
  pinctrl: lantiq: Release gpiochip resources in fail case
  pinctrl: imx: detect uninitialized pins
  pinctrl: tegra: Add MIPI pad control
  pinctrl: at91: Switch to using managed clk_get
  pinctrl: adi2: Remove duplicate gpiochip_remove_pin_ranges
  ...

pinctrl: clean up after enable refactoring

2014-09-04T08:05:07+00:00

commit 2243a87d90b42eb38bc281957df3e57c712b5e56
"pinctrl: avoid duplicated calling enable_pinmux_setting for a pin"
removed the .disable callback from the struct pinmux_ops,
making the .enable() callback the only remaining callback.

However .enable() is a bad name as it seems to imply that a
muxing can also be disabled. Rename the callback to .set_mux()
and also take this opportunity to clean out any remaining
mentions of .disable() from the documentation.

Acked-by: Stephen Warren 
Acked-by: Bjorn Andersson 
Acked-by: Fan Wu 
Signed-off-by: Linus Walleij

pinctrl: tegra-xusb: testing wrong variable in probe()

2014-08-17T14:15:44+00:00

There is a cut and paste bug so we test the wrong variable.  "err" is
never less than zero at this point.

Signed-off-by: Dan Carpenter 
Acked-by: Stephen Warren 
Acked-by: Thierry Reding 
Signed-off-by: Linus Walleij