linux-toradex.git/drivers/pinctrl/pinctrl-tegra.c, branch v3.10.28

pinctrl: Declare operation structures as const

2013-03-07T04:27:29+00:00

The pinconf, pinctrl and pinmux operation structures hold function
pointers that are never modified. Declare them as const.

Signed-off-by: Laurent Pinchart 
Signed-off-by: Linus Walleij

pinctrl: tegra: add support for rcv-sel and drive type

2013-01-18T15:13:52+00:00

NVIDIA's Tegra114 added two more configuration parameter in pinmux i.e.
rcv-sel and drive type.

rcv-sel: Select between High and Normal VIL/VIH receivers.
	RCVR_SEL=1: High VIL/VIH
	RCVR_SEL=0: Normal VIL/VIH

drv_type: Ouptput drive type:
	33-50 ohm driver: 0x1
	66-100ohm driver: 0x0

Add support of these parameters to be configure from DTS file.

Tegra20 and Tegra30 does not support this configuration and hence initialize their
pinmux structure with reg = -1.

Originally written by Pritesh Raithatha.
Changes by ldewangan:
	- remove drvtype_width as it is always 2.
	- Better describe the change.

Signed-off-by: Pritesh Raithatha 
Signed-off-by: Laxman Dewangan 
Reviewed-by: Stephen Warren 
Signed-off-by: Linus Walleij

Drivers: pinctrl: remove __dev* attributes.

2013-01-03T23:57:02+00:00

CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton 
Cc: Linus Walleij 
Cc: Jean-Christophe Plagniol-Villard 
Cc: Stephen Warren 
Cc: Srinidhi Kasagar 
Cc: Barry Song 
Cc: Viresh Kumar 
Cc: Thomas Petazzoni 
Cc: Jason Cooper 
Cc: Sebastian Hesselbarth 
Cc: Andrew Lunn 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'driver-core-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2012-12-11T21:13:55+00:00

Pull driver core updates from Greg Kroah-Hartman:
 "Here's the large driver core updates for 3.8-rc1.

  The biggest thing here is the various __dev* marking removals.  This
  is going to be a pain for the merge with different subsystem trees, I
  know, but all of the patches included here have been ACKed by their
  various subsystem maintainers, as they wanted them to go through here.

  If this is too much of a pain, I can pull all of them out of this tree
  and just send you one with the other fixes/updates and then, after
  3.8-rc1 is out, do the rest of the removals to ensure we catch them
  all, it's up to you.  The merges should all be trivial, and Stephen
  has been doing them all in linux-next for a few weeks now quite
  easily.

  Other than the __dev* marking removals, there's nothing major here,
  some firmware loading updates and other minor things in the driver
  core.

  All of these have (much to Stephen's annoyance), been in linux-next
  for a while.

  Signed-off-by: Greg Kroah-Hartman "

Fixed up trivial conflicts in drivers/gpio/gpio-{em,stmpe}.c due to gpio
update.

* tag 'driver-core-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (93 commits)
  modpost.c: Stop checking __dev* section mismatches
  init.h: Remove __dev* sections from the kernel
  acpi: remove use of __devinit
  PCI: Remove __dev* markings
  PCI: Always build setup-bus when PCI is enabled
  PCI: Move pci_uevent into pci-driver.c
  PCI: Remove CONFIG_HOTPLUG ifdefs
  unicore32/PCI: Remove CONFIG_HOTPLUG ifdefs
  sh/PCI: Remove CONFIG_HOTPLUG ifdefs
  powerpc/PCI: Remove CONFIG_HOTPLUG ifdefs
  mips/PCI: Remove CONFIG_HOTPLUG ifdefs
  microblaze/PCI: Remove CONFIG_HOTPLUG ifdefs
  dma: remove use of __devinit
  dma: remove use of __devexit_p
  firewire: remove use of __devinitdata
  firewire: remove use of __devinit
  leds: remove use of __devexit
  leds: remove use of __devinit
  leds: remove use of __devexit_p
  mmc: remove use of __devexit
  ...

pinctrl: remove use of __devexit

2012-11-28T19:58:23+00:00

CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton 
Cc: Jean-Christophe Plagniol-Villard 
Cc: Stephen Warren 
Cc: Viresh Kumar 
Acked-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

pinctrl: tegra: Staticize non-exported symbols

2012-11-15T10:21:47+00:00

They are not referenced outside of this file, make them static.

Signed-off-by: Axel Lin 
Acked-by: Stephen Warren 
Signed-off-by: Linus Walleij

pinctrl: Staticize pinconf_ops

2012-11-11T18:35:38+00:00

They are not referenced outside respective driver.

Signed-off-by: Axel Lin 
Cc: Jean-Christophe PLAGNIOL-VILLARD 
Cc: Simon Arlott 
Cc: John Crispin 
Cc: Shawn Guo 
Cc: Stephen Warren 
Acked-by: Dong Aisheng 
Signed-off-by: Linus Walleij

pinctrl: tegra: set low power mode bank width to 2

2012-10-17T17:47:06+00:00

Cc: stable@kernel.org
Signed-off-by: Pritesh Raithatha 
Acked-by: Stephen Warren 
Tested-by: Stephen Warren 
Signed-off-by: Linus Walleij

pinctrl: tegra: move pinconf-tegra.h content into drivers/pinctrl

2012-09-14T17:35:37+00:00

Now that Tegra's pinmux is configured solely from device tree, there's
no need for the pinconf types to be defined in arch/arm/mach-tegra/.
Move it into the pinctrl directory to clean up mach-tegra, as a pre-
requisite for single-zImage.

Signed-off-by: Stephen Warren 
Acked-by: Linus Walleij

pinctrl/pinctrl-tegra: remove IS_ERR checking of pmx->pctl

2012-07-03T19:51:08+00:00

pinctrl_register returns a pointer of struct type struct pinctrl_dev,
if successfully registered to pinctrl subsystem, otherwise returns
NULL, and there wont' be any pointers which are not dereferencible.

They are not type of pointer addresses but are kind of error
codes rather actual addresses, but are a kind of return
codes of functions returning integer types.

return -ENODEV if device registration fails.

Acked-by: Stephen Warren 
Signed-off-by: Devendra Naga 
Signed-off-by: Linus Walleij