Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v5.3 kernel cycle:

  Core changes:

   - Device links can optionally be added between a pin control producer
     and its consumers. This will affect how the system power management
     is handled: a pin controller will not suspend before all of its
     consumers have been suspended.

     This was necessary for the ST Microelectronics STMFX expander and
     need to be tested on other systems as well: it makes sense to make
     this default in the long run.

     Right now it is opt-in per driver.

   - Drive strength can be specified in microamps. With decreases in
     silicon technology, milliamps isn't granular enough, let's make it
     possible to select drive strengths in microamps.

     Right now the Meson (AMlogic) driver needs this.

  New drivers:

   - New subdriver for the Tegra 194 SoC.

   - New subdriver for the Qualcomm SDM845.

   - New subdriver for the Qualcomm SM8150.

   - New subdriver for the Freescale i.MX8MN (Freescale is now a product
     line of NXP).

   - New subdriver for Marvell MV98DX1135.

  Driver improvements:

   - The Bitmain BM1880 driver now supports pin config in addition to
     muxing.

   - The Qualcomm drivers can now reserve some GPIOs as taken aside and
     not usable for users. This is used in ACPI systems to take out some
     GPIO lines used by the BIOS so that noone else (neither kernel nor
     userspace) will play with them by mistake and crash the machine.

   - A slew of refurbishing around the Aspeed drivers (board management
     controllers for servers) in preparation for the new Aspeed AST2600
     SoC.

   - A slew of improvements over the SH PFC drivers as usual.

   - Misc cleanups and fixes"

* tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (106 commits)
  pinctrl: aspeed: Strip moved macros and structs from private header
  pinctrl: aspeed: Fix missed include
  pinctrl: baytrail: Use GENMASK() consistently
  pinctrl: baytrail: Re-use data structures from pinctrl-intel.h
  pinctrl: baytrail: Use defined macro instead of magic in byt_get_gpio_mux()
  pinctrl: qcom: Add SM8150 pinctrl driver
  dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding
  dt-bindings: pinctrl: qcom: Document missing gpio nodes
  pinctrl: aspeed: Add implementation-related documentation
  pinctrl: aspeed: Split out pinmux from general pinctrl
  pinctrl: aspeed: Clarify comment about strapping W1C
  pinctrl: aspeed: Correct comment that is no longer true
  MAINTAINERS: Add entry for ASPEED pinctrl drivers
  dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema
  dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema
  dt-bindings: pinctrl: aspeed: Split bindings document in two
  pinctrl: qcom: Add irq_enable callback for msm gpio
  pinctrl: madera: Fixup SPDX headers
  pinctrl: qcom: sdm845: Fix CONFIG preprocessor guard
  pinctrl: tegra: Add bitmask support for parked bits
  ...

Introduce the irq_enable callback which will be same as irq_unmask
except that it will also clear the status bit before unmask.

This will help in clearing any erroneous interrupts that would
have got latched when the interrupt is not in use.

There may be devices like UART which can use the same gpio line
for data rx as well as a wakeup gpio when in suspend. The data that
was flowing on the line may latch the interrupt and when we enable
the interrupt before going to suspend, this would trigger the
unexpected interrupt. This change helps clearing the interrupt
so that these unexpected interrupts gets cleared.

Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Link: https://lore.kernel.org/r/1561472086-23360-1-git-send-email-neeraju@codeaurora.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

When booting MSM based platforms with Device Tree or some ACPI
implementations, it is possible to provide a list of reserved pins
via the 'gpio-reserved-ranges' and 'gpios' properties respectively.
However some ACPI tables are not populated with this information,
thus it has to come from a knowledgable device driver instead.

Here we provide the MSM common driver with additional support to
parse this informtion and correctly populate the widely used
'valid_mask'.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 and
  only version 2 as published by the free software foundation this
  program is distributed in the hope that it will be useful but
  without any warranty without even the implied warranty of
  merchantability or fitness for a particular purpose see the gnu
  general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 294 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Without CONFIG_PM_SLEEP, we get annoying warnings about unused functions:

drivers/pinctrl/qcom/pinctrl-msm.c:1082:12: error: 'msm_pinctrl_resume' defined but not used [-Werror=unused-function]
 static int msm_pinctrl_resume(struct device *dev)
            ^~~~~~~~~~~~~~~~~~
drivers/pinctrl/qcom/pinctrl-msm.c:1075:12: error: 'msm_pinctrl_suspend' defined but not used [-Werror=unused-function]
 static int msm_pinctrl_suspend(struct device *dev)

Mark them as __maybe_unused to shut up the warning and silently drop
the functions without having to add ugly #ifdefs.

Fixes: 977d057ad346 ("pinctrl: msm: Add sleep pinctrl state transitions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Add PM suspend callbacks to the msm core driver that select the
sleep and default pinctrl states. Then wire those callbacks up
in the sdm845 driver, for those boards that may have GPIO hogs
that need to change state during suspend.

Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.20 series:

  Core changes:

   - A patch series from Hans Verkuil to make it possible to
     enable/disable IRQs on a GPIO line at runtime and drive GPIO lines
     as output without having to put/get them from scratch.

     The irqchip callbacks have been improved so that they can use only
     the fastpatch callbacks to enable/disable irqs like any normal
     irqchip, especially the gpiod_lock_as_irq() has been improved to be
     callable in fastpath context.

     A bunch of rework had to be done to achieve this but it is a big
     win since I never liked to restrict this to slowpath. The only call
     requireing slowpath was try_module_get() and this is kept at the
     .request_resources() slowpath callback. In the GPIO CEC driver this
     is a big win sine a single line is used for both outgoing and
     incoming traffic, and this needs to use IRQs for incoming traffic
     while actively driving the line for outgoing traffic.

   - Janusz Krzysztofik improved the GPIO array API to pass a "cookie"
     (struct gpio_array) and a bitmap for setting or getting multiple
     GPIO lines at once.

     This improvement orginated in a specific need to speed up an OMAP1
     driver and has led to a much better API and real performance gains
     when the state of the array can be used to bypass a lot of checks
     and code when we want things to go really fast.

     The previous code would minimize the number of calls down to the
     driver callbacks assuming the CPU speed was orders of magnitude
     faster than the I/O latency, but this assumption was wrong on
     several platforms: what we needed to do was to profile and improve
     the speed on the hot path of the array functions and this change is
     now completed.

   - Clean out the painful and hard to grasp BNF experiments from the
     device tree bindings. Future approaches are looking into using JSON
     schema for this purpose. (Rob Herring is floating a patch series.)

  New drivers:

   - The RCAR driver now supports r8a774a1 (RZ/G2M).

   - Synopsys GPIO via CREGs driver.

  Major improvements:

   - Modernization of the EP93xx driver to use irqdomain and other
     contemporary concepts.

   - The ingenic driver has been merged into the Ingenic pin control
     driver and removed from the GPIO subsystem.

   - Debounce support in the ftgpio010 driver"

* tag 'gpio-v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (116 commits)
  gpio: Clarify kerneldoc on gpiochip_set_chained_irqchip()
  gpio: Remove unused 'irqchip' argument to gpiochip_set_cascaded_irqchip()
  gpio: Drop parent irq assignment during cascade setup
  mmc: pwrseq_simple: Fix incorrect handling of GPIO bitmap
  gpio: fix SNPS_CREG kconfig dependency warning
  gpiolib: Initialize gdev field before is used
  gpio: fix kernel-doc after devres.c file rename
  gpio: fix doc string for devm_gpiochip_add_data() to not talk about irq_chip
  gpio: syscon: Fix possible NULL ptr usage
  gpiolib: Show correct direction from the beginning
  pinctrl: msm: Use init_valid_mask exported function
  gpiolib: Add init_valid_mask exported function
  GPIO: add single-register GPIO via CREG driver
  dt-bindings: Document the Synopsys GPIO via CREG bindings
  gpio: mockup: use device properties instead of platform_data
  gpio: Slightly more helpful debugfs
  gpio: omap: Remove set but not used variable 'dev'
  gpio: omap: drop omap_gpio_list
  Accept partial 'gpio-line-names' property.
  gpio: omap: get rid of the conditional PM runtime calls
  ...

The current code produces XPU violation if get_direction is called just
after the initialization.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: Timur Tabi <timur@kernel.org>
Tested-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This code needs to select function #0, which is the first int in the
array of functions, not the number 0 which may or may not be the
function for "GPIO mode" per the enum mapping. We were getting lucky on
SDM845, where this was tested, because the function 0 matched the enum
value for "GPIO mode". On other platforms, e.g. MSM8996, the gpio enum
value is the last one in the list so this code doesn't work and we see a
warning at boot. Fix it by grabbing the first element out of the array
of functions.

Cc: Doug Anderson <dianders@chromium.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Niklas Cassel <niklas.cassel@linaro.org>
Reported-by: Niklas Cassel <niklas.cassel@linaro.org>
Fixes: 1de7ddb3a15c ("pinctrl: msm: Mux out gpio function with gpio_request()")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This is the 4.19-rc6 release

I needed to merge this in because of extensive conflicts in
the MSM and Intel pin control drivers. I know how to resolve
them, so let's do it like this.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>