On the RZ/G2L SoC family, the direction of the Ethernet TXC/TX_CLK
signal is selectable to support an Ethernet PHY operating in either MII
or RGMII mode. By default, the signal is configured as an input and MII
mode is supported. The ETH_MODE register can be modified to configure
this signal as an output to support RGMII mode.

As this signal is by default an input, and can optionally be switched to
an output, it maps neatly onto an `output-enable` property in the device
tree.

Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240625200316.4282-4-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

The variable naming in the various OEN functions has been confusing. We
were passing the _pin & bit variables from rzg2l_pinctrl_pinconf_get()
and rzg2l_pinctrl_pinconf_set() as the offset & pin argument to the
oen_read() and oen_write() functions. This doesn't make sense, the first
of these isn't actually an offset and the second is not needed for
RZ/V2H but leads to confusion with the bit variable used within these
functions.

To tidy this up, instead pass the _pin variable directly to the
oen_read() and oen_write() functions with consistent naming. Then
rzg3s_read_oen() and rzg3s_write_oen() can use macros to get the port
and pin numbers it needs.

Instead of passing the pin capabilities into oen_read() and oen_write(),
check that the pin supports OEN before calling these functions.

Also, merge rzg3s_oen_is_supported() into rzg3s_pin_to_oen_bit() to give
a single translation function which returns an error if the pin doesn't
support OEN. While we're here, remove an unnecessary branch and clarify
the variable naming. Lastly, check that we are not dealing with a
dedicated pin before calling RZG2L_PIN_ID_TO_{PORT,PIN}().

Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240625200316.4282-3-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

We currently support OEN read/write for the RZ/G3S SoC but not the
RZ/G2L SoC family (consisting of RZ/G2L, RZ/G2LC, RZ/G2UL, RZ/V2L &
RZ/Five). The appropriate functions are renamed to clarify this and to
match the callback names.

We should also only set the oen_read and oen_write function pointers for
the devices which support these operations. This requires us to check
that these function pointers are valid before calling them.

Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240625200316.4282-2-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Usually there are no separators between alternate functions.
Remove them to increase uniformity.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/1fcd4f8734d063c9a691d9ab8ca0543892eb8388.1718378979.git.geert+renesas@glider.be

Add pins, groups, and function for the Interrupt Controller for External
Devices (INTC-EX) on the Renesas R-Car V4H (R8A779G0) SoC.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/9c33c36d13a5e38d79fa53085339b14631888b50.1718378943.git.geert+renesas@glider.be

Usually there are no separators between alternate functions.
Remove them to increase uniformity.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/2375711d5edd03a209b4ed996f136e1f3c649773.1718378859.git.geert+renesas@glider.be

EtherAVB instances 0 and 1 support both RGMII and MII interfaces.
Add the missing pins and groups for MII.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/4a0a12227f2145ef53b18bc08f45b19dcd745fc6.1718378739.git.geert+renesas@glider.be

The Timer Pulse Unit channels have two alternate pin groups:
"tpu_to[0-3]" and "tpu_to[0-3]_a".

Increase uniformity by adopting R-Car V4M naming:
  - Rename "tpu_to[0-3]_a" to "tpu_to[0-3]_b",
  - Rename "tpu_to[0-3]" to "tpu_to[0-3]_a",

Fixes: ad9bb2fec66262b0 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support")
Fixes: 050442ae4c74f830 ("pinctrl: renesas: r8a779g0: Add pins, groups and functions")
Fixes: 85a9cbe4c57bb958 ("pinctrl: renesas: r8a779g0: Add missing TPU0TOx_A")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/0dd9428bc24e97e1001ed3976b1cb98966f5e7e3.1717754960.git.geert+renesas@glider.be

The Pin Multiplex attachment in Rev.1.10 of the R-Car V4H Series
Hardware User's Manual still has two alternate pins named both TCLK3
and TCLK4.  To differentiate, the pin control driver uses "TCLK[34]" and
"TCLK[34]_X".  In addition, there are alternate pins without suffix, and
with an "_A" or "_B" suffix.

Increase uniformity by adopting R-Car V4M naming:
  - Rename "TCLK2_B" to "TCLK2_C",
  - Rename "TCLK[12]_A" to "TCLK[12]_B",
  - Rename "TCLK[12]" to "TCLK[12]_A",
  - Rename "TCLK[34]_A" to "TCLK[34]_C",
  - Rename "TCLK[34]_X" to "TCLK[34]_A",
  - Rename "TCLK[34]" to "TCLK[34]_B".

Fixes: ad9bb2fec66262b0 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support")
Fixes: 0df46188a58895e1 ("pinctrl: renesas: r8a779g0: Add missing TCLKx_A/TCLKx_B/TCLKx_X")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/2845ff1f8fe1fd8d23d2f307ad5e8eb8243da608.1717754960.git.geert+renesas@glider.be

PWM channels 0, 2, 8, and 9 do not have alternate pins.
Remove their "_a" or "_b" suffixes to increase uniformity.

Fixes: c606c2fde2330547 ("pinctrl: renesas: r8a779g0: Add missing PWM")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/abb748e6e1e4e7d78beac7d96e7a0a3481b32e75.1717754960.git.geert+renesas@glider.be