linux-toradex.git/drivers/pinctrl/uniphier, branch v4.10

pinctrl: uniphier: fix Ethernet (RMII) pin-mux setting for LD20

2017-01-19T09:36:40+00:00

Fix the pin-mux values for the MDC, MDIO, MDIO_INTL, PHYRSTL pins.

Fixes: 1e359ab1285e ("pinctrl: uniphier: add Ethernet pin-mux settings")
Signed-off-by: Masahiro Yamada 
Signed-off-by: Linus Walleij

pinctrl: uniphier: add Ethernet pin-mux settings

2016-07-11T07:53:25+00:00

Add the following Ethernet interfaces:

  PH1-LD4: MII, RMII
  PH1-Pro4: MII, RMII, RGMII
  PH1-sLD8: MII, RMII (Built-in PHY is also supported)
  ProXstream2: MII, RMII, RGMII
  PH1-LD6b: RMII, RGMII
  PH1-LD11: RMII (Built-in PHY is also supported)
  PH1-LD20: RMII, RGMII

Signed-off-by: Masahiro Yamada 
Signed-off-by: Linus Walleij

pinctrl: uniphier: remove pointless pin-mux settings for PH1-LD11

2016-07-04T09:47:55+00:00

This SoC has no SD card controller.  Nor does it have USB port3.
These pin-mux settings have no point.

Fixes: 70f2f9c4cf25 ("pinctrl: uniphier: add UniPhier PH1-LD11 pinctrl driver")
Signed-off-by: Masahiro Yamada 
Signed-off-by: Linus Walleij

pinctrl: uniphier: fix meaningless drive control offsets

2016-06-18T08:03:09+00:00

These are input-only pins.  They do not support drive controlling
in the first place.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Linus Walleij

pinctrl: uniphier: prohibit drive control for pin 61-66 of PH1-LD11

2016-06-18T08:02:09+00:00

According to the hardware document, setting the drive control is
prohibited for these pins (N-channel Open Drain pins).  Set their
drive control attribute to "fixed".

Signed-off-by: Masahiro Yamada 
Signed-off-by: Linus Walleij

pinctrl: uniphier: fix NAND pin-mux settings for PH1-LD11/LD20

2016-06-08T09:13:11+00:00

My mistake in the initial support patches.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Linus Walleij

pinctrl: uniphier: add UniPhier PH1-LD20 pinctrl driver

2016-05-31T10:57:45+00:00

Add pin configuration and pinmux support for UniPhier PH1-LD20 SoC.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Linus Walleij

pinctrl: uniphier: add UniPhier PH1-LD11 pinctrl driver

2016-05-31T10:56:25+00:00

Add pin configuration and pinmux support for UniPhier PH1-LD11 SoC.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Linus Walleij

pinctrl: uniphier: allow to have pinctrl node under syscon node

2016-05-31T10:54:14+00:00

Currently, the UniPhier pinctrl driver itself is a syscon, but it
turned out much more reasonable to make it a child node of a syscon
because our syscon node consists of a bunch of system configuration
registers, not only pinctrl, but also phy, and misc registers.
It is difficult to split the node.

To allow to migrate to the new DT structure, this commit adds new
compatible strings to not disturb the existing DT.  After a while,
the old binding will be removed.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Linus Walleij

pinctrl: uniphier: add System Bus pin-mux settings

2016-05-31T10:53:06+00:00

This is needed to get access to UniPhier System Bus (external bus).

Signed-off-by: Masahiro Yamada 
Signed-off-by: Linus Walleij