Pull pin control changes from Linus Walleij:
 "This is the bulk of pin control changes for the v3.16 development
  cycle:

   - Antoine Tenart made the get_group_pins() vtable entry optional.

   - Antoine also provides an entirely new driver for the Marvell Berlin
     SoC.  This is unrelated to the existing MVEBU hardware driver and
     warrants its own separate driver.

   - reflected from the GPIO subsystem there is a number of refactorings
     to make pin control drivers with gpiochips use the new gpiolib
     irqchip helpers.  The following drivers were converted to use the
     new infrastructure:
       * ST Microelectronics STiH416 and friends
       * The Atmel AT91
       * The CSR SiRF (Prima2)
       * The Qualcomm MSM series

   - massive improvements in the Qualcomm MSM driver from Bjorn
     Andersson, Andy Gross and Kumar Gala.  Among those new support for
     the IPQ8064 and MSM8x74 SoC variants.

   - support for the Freescale i.MX6 SoloX SoC variant.

   - massive improvements in the Allwinner sunxi driver from Boris
     Brezillon, Maxime Ripard and Chen-Yu Tsai.

   - Renesas PFC updates from Laurent Pinchart, Kuninori Morimoto,
     Wolfram Sang and Magnus Damm.

   - Cleanups and refactorings of the nVidia Tegra driver from Stepgen
     Warren.

   - the Exynos driver now supports the Exynos3250 SoC.

   - Intel BayTrail updates from Jin Yao, Mika Westerberg.

   - the MVEBU driver now supports the Orion5x SoC variants, which is
     part of the effort of getting rid of the old Marvell kludges in
     arch/arm/mach-orion5x

   - Rockchip driver updates from Heiko Stuebner.

   - a ton of cleanups and janitorial patches from Axel Lin.

   - some minor fixes and improvements here and there"

* tag 'pinctrl-v3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (93 commits)
  pinctrl: sirf: fix a bad conflict resolution
  pinctrl: msm: Add more MSM8X74 pin definitions
  pinctrl: qcom: ipq8064: Fix naming convention
  pinctrl: msm: Add missing sdc1 and sdc3 groups
  pinctrl: sirf: switch to using allocated state container
  pinctrl: Enable "power-source" to be extracted from DT files
  pinctrl: sunxi: create irq/pin mapping during init
  pinctrl: pinconf-generic: Use kmemdup instead of kmalloc + memcpy
  pinctrl: berlin: Use devm_ioremap_resource()
  pinctrl: sirf: fix typo for GPIO bank number
  pinctrl: sunxi: depend on RESET_CONTROLLER
  pinctrl: sunxi: fix pin numbers passed to register offset helpers
  pinctrl: add pinctrl driver for imx6sx
  pinctrl/at91: Fix lockup when IRQ on PIOC and PIOD occurs
  pinctrl: msm: switch to using generic GPIO irqchip helpers
  pinctrl: sunxi: Fix multiple registration issue
  pinctrl: sunxi: Fix recursive dependency
  pinctrl: berlin: add the BG2CD pinctrl driver
  pinctrl: berlin: add the BG2 pinctrl driver
  pinctrl: berlin: add the BG2Q pinctrl driver
  ...

Commit 294d1351ff47726f0f110b88e816cbafe89512fb
"pinctrl: sirf: switch to using allocated state container"
caused a build conflict due to a bad conflict resolution
when cherry-picking the patch. Fix it up.

Cc: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This patch adds pin definitiones for the MSM8x74 TLMM.
New definitions include:

BLSP devices (I2C, UART, SPI, and UIM), mi2s, gp clk,
pdm, gcc clk, cci_timer, cci_i2c, cam_clk, hsic, tsif,
sdc3, sdc4, and other assorted pins.

Signed-off-by: Andy Gross <agross@codeaurora.org>
Acked-By: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Drop underscore in spdif_groups to match all other groups.

Signed-off-by: Kumar Gala <galak@codeaurora.org>
Reviewed-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This rewrites the SIRF pinctrl driver to allocate a state container
for the GPIO chip, just as is done for the pin controller, and
use the gpiochip_add_pin_range() to add the range from the gpiochip
side rather than adding the range from the pinctrl side.

All resulting changes are done in order to pass around a state
container rather than refer to a static global object.

Acked-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Add "power-source" property to generic options used for DT parsing files.
This  enables drivers, which use generic pin configurations, to get the
value passed to this property.

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The irq/pin mapping is used to lookup the pin to mux to the irq
function when the irq is enabled. It is created when gpio_to_irq
is called. Creating the mapping during init allows us to map the
interrupts directly from the device tree.

Originally the IRQ to pin mapping was created when gpio_to_irq
was called with a GPIO handle. The mapping in turn is used to mux
the pin into EINT mode.

If the mapping is created during gpio_to_irq, we can't use the
interrupts directly, i.e. through the DT with "interrupts = <&pio A 4>".

Instead we'd have to use "gpios = <&pio A B>", then pass the gpio
through to gpio_to_irq.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This issue was reported by coccicheck using the semantic patch
at scripts/coccinelle/api/memdup.cocci

Signed-off-by: Benoit Taine <benoit.taine@lip6.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Use devm_ioremap_resource() because devm_request_and_ioremap() is
obsoleted by devm_ioremap_resource().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>