Pull ARM SoC device tree conversions from Arnd Bergmann:
 "These are device tree conversions for a number of platforms, with the
  intention of turning code from board files into device tree
  descriptions.  Notable changes are:

   - davinci bindings for pinctrl, MTD, RTC, watchdog and i2c

   - nomadik bindings for all devices, removing the board files

   - bcm2835 bindings for mmc and i2c

   - tegra bindings for hdmi, keyboard, audio, as well as some updates

   - at91 bindings for hardware ecc and for devices on RM9200

   - mxs bindings for cfa100xx

   - sunxi support for Miniand Hackberry board"

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (72 commits)
  Revert "sunxi: a10-cubieboard: Add user LEDs to the device tree"
  Revert "sunxi: a13-olinuxino: Add user LED to the device tree"
  clk: tegra: initialise parent of uart clocks
  ARM: tegra: remove clock-frequency properties from serial nodes
  clk: tegra: fix driver to match DT binding
  clk: tegra: local arrays should be static
  clk: tegra: Add missing spinlock for hclk and pclk
  clk: tegra: Implement locking for super clock
  clk: tegra: fix wrong clock index between se to sata_cold
  sunxi: a13-olinuxino: Add user LED to the device tree
  ARM: davinci: da850 DT: add support for machine reboot
  ARM: davinci: da850: add wdt DT node
  ARM: davinci: da850: add DT node for I2C0
  ARM: at91: at91sam9n12: add DT parameters to enable PMECC
  ARM: at91: at91sam9x5: add DT parameters to enable PMECC
  ARM: at91: add EMAC bindings to RM9200 DT
  ARM: at91: add SSC bindings to RM9200 DT
  ARM: at91: add MMC bindings to RM9200 DT
  ARM: at91: Animeo IP: enable watchdog support
  ARM: nomadik: fix OF compilation regression
  ...

Pull sh-mobile pinctrl conversion from Arnd Bergmann:
 "This is another cleanup series, containing the move of the Renesas
  SH-Mobile pin controller code from arch/arm/mach-shmobile over to the
  generic pinctrl subsystem, changing it over to the common interfaces
  in the process.

  Based on agreement between Olof, Paul Mundt, Linus Walleij and Simon,
  we're merging this large branch of pinctrl conversion through arm-soc,
  even though it contains the corresponding conversions for arch/sh.
  Main reason for this is tight dependencies (that will now mostly be
  broken) between the arch/sh and mach-shmobile implementations.

  There will be more of this in 3.10 to do device-tree bindings, but
  this is the initial conversion."

* tag 'sh-pinmux' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (81 commits)
  sh-pfc: sh_pfc_probe() sizeof() fix
  sh-pfc: Move sh_pfc.h from include/linux/ to driver directory
  sh-pfc: Remove pinmux_info definition
  sh: Remove unused sh_pfc_register_info() function
  sh: shx3: pinmux: Use driver-provided pinmux info
  sh: sh7786: pinmux: Use driver-provided pinmux info
  sh: sh7785: pinmux: Use driver-provided pinmux info
  sh: sh7757: pinmux: Use driver-provided pinmux info
  sh: sh7734: pinmux: Use driver-provided pinmux info
  sh: sh7724: pinmux: Use driver-provided pinmux info
  sh: sh7723: pinmux: Use driver-provided pinmux info
  sh: sh7722: pinmux: Use driver-provided pinmux info
  sh: sh7720: pinmux: Use driver-provided pinmux info
  sh: sh7269: pinmux: Use driver-provided pinmux info
  sh: sh7264: pinmux: Use driver-provided pinmux info
  sh: sh7203: pinmux: Use driver-provided pinmux info
  ARM: shmobile: sh73a0: Use driver-provided pinmux info
  ARM: shmobile: sh7372: Use driver-provided pinmux info
  ARM: shmobile: r8a7779: Use driver-provided pinmux info
  ARM: shmobile: r8a7740: Use driver-provided pinmux info
  ...

Pull non-critical ARM SoC bug fixes from Arnd Bergmann:
 "Bug fixes that did not make it into v3.8, mostly because they were not
  considered important enough, and in some cases because bugs only show
  up in combination with other patches destined for 3.9.  This includes
  a few larger patches for GPIO on the Marvell PXA platform and a lot of
  Samsung specific bug fixes, as well as a series from Arnd to fix older
  build warnings."

* tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  ARM: SPEAr13xx: Enable CONFIG_ARCH_HAS_CPUFREQ
  ARM: imx: MACH_MX31ADS_WM1133_EV1 needs REGULATOR_WM8350
  scripts/sortextable: silence script output
  ARM: s3c: i2c: add platform_device forward declaration
  ARM: mvebu: allow selecting mvebu without Armada XP
  ARM: pick Versatile by default for !MMU
  ARM: integrator: fix build with INTEGRATOR_AP off
  ARM: integrator/versatile: fix NOMMU warnings
  ARM: sa1100: don't warn about mach/ide.h
  ARM: shmobile: fix defconfig warning on CONFIG_USB
  ARM: w90x900: fix legacy assembly syntax
  ARM: samsung: fix assembly syntax for new gas
  ARM: disable virt_to_bus/virt_to_bus almost everywhere
  ARM: dts: Correct pin configuration of SD 4 for exynos4x12-pinctrl
  ARM: SAMSUNG: Silence empty switch warning in fimc-core.h
  ARM: SAMSUNG: Silence empty switch warning in sdhci.h
  ARM: msm: proc_comm_boot_wait should not be __init
  arm: vt8500: Update MAINTAINERS entry for arch-vt8500
  ARM: integrator: ensure ap_syscon_base is initialised when !CONFIG_MMU
  ARM: S5PV210: Fix early uart output in fifo mode
  ...

Pull driver core patches from Greg Kroah-Hartman:
 "Here is the big driver core merge for 3.9-rc1

  There are two major series here, both of which touch lots of drivers
  all over the kernel, and will cause you some merge conflicts:

   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.

   - remove CONFIG_EXPERIMENTAL

  Other than those patches, there's not much here, some minor fixes and
  updates"

Fix up trivial conflicts

* tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits)
  base: memory: fix soft/hard_offline_page permissions
  drivercore: Fix ordering between deferred_probe and exiting initcalls
  backlight: fix class_find_device() arguments
  TTY: mark tty_get_device call with the proper const values
  driver-core: constify data for class_find_device()
  firmware: Ignore abort check when no user-helper is used
  firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER
  firmware: Make user-mode helper optional
  firmware: Refactoring for splitting user-mode helper code
  Driver core: treat unregistered bus_types as having no devices
  watchdog: Convert to devm_ioremap_resource()
  thermal: Convert to devm_ioremap_resource()
  spi: Convert to devm_ioremap_resource()
  power: Convert to devm_ioremap_resource()
  mtd: Convert to devm_ioremap_resource()
  mmc: Convert to devm_ioremap_resource()
  mfd: Convert to devm_ioremap_resource()
  media: Convert to devm_ioremap_resource()
  iommu: Convert to devm_ioremap_resource()
  drm: Convert to devm_ioremap_resource()
  ...

Pull pinctrl changes from Linus Walleij:
 "These are the main pinctrl changes for the v3.9 merge window.  The
  most interesting change by far is how the device core grabs pinctrl
  default handles avoiding the need to stick boilerplate into driver
  consumers.

   - Grabbing of default pinctrl handles from the device core.  These
     are the hunks hitting drivers/base.  All is ACKed by Greg, after a
     long discussion about different alternatives.

   - Some stuff also touches the MFD and ARM SoC trees, this has been
     coordinated and ACKed.

   - New drivers for:
     - The Tegra 114 sub-SoC
     - Allwinner sunxi
     - New ABx500 driver and sub-SoC drivers for AB8500, AB8505, AB9540
       and AB8540.

   - Make it possible for hogged pins to enter a sleep mode, and make it
     possible for drivers to control that mode.

   - Various clean-up, extensions and device tree support to various pin
     controllers."

* tag 'pinctrl-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (68 commits)
  pinctrl: tegra: add clfvs function to Tegra114 support
  pinctrl: generic: rename input schmitt disable
  pinctrl/pinconfig: add debug interface
  pinctrl: samsung: remove duplicated line
  ARM: ux500: use real AB8500 IRQ numbers instead of virtual ones
  ARM: ux500: remove irq_base property from platform_data
  pinctrl/abx500: use direct IRQ defines
  pinctrl/abx500: replace IRQ offsets with table read-in values
  pinctrl/abx500: move IRQ handling to ab8500-core
  pinctrl: exynos5440: remove erroneous __init
  pinctrl/abx500: adjust offset for get_mode()
  pinctrl/abx500: add Device Tree support
  pinctrl/abx500: align GPIO cluster boundaries
  pinctrl/abx500: prevent error path from corrupting returning error
  pinctrl: sunxi: add of_xlate function
  pinctrl/lantiq: fix pin number in ltq_pmx_gpio_request_enable
  pinctrl/lantiq: add functionality to falcon_pinconf_dbg_show
  pinctrl/lantiq: fix pinconfig parameters
  pinctrl/lantiq: one of the boot leds was defined incorrectly
  pinctrl/lantiq: only probe available pad controllers
  ...

Fix sizeof() usage in sh-pfc/core.c to allocate space
for the full data structure instead of a pointer.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This patch adds the definition for the cldvfs function for Tegra114 pinctrl
support. This is based on work by Pritesh Raithatha.

Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Rename PIN_CONFIG_INPUT_SCHMITT_DISABLE to
PIN_CONFIG_INPUT_SCHMITT_ENABLE. It's used to make it more generialize.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This is a branch of fixes that originally were scheduled for 3.8 but
due to the request from Linus to hold back on all but the most critical
of fixes, we're re-queueing them for 3.9 here.

* fixes-for-3.9:
  ARM: dts: imx6: fix fec ptp clock slow 10 time
  ARM: highbank: mask cluster id from cpu_logical_map
  ARM: scu: mask cluster id from cpu_logical_map
  ARM: scu: add empty scu_enable for !CONFIG_SMP
  ARM: at91/at91sam9x5.dtsi: fix usart3 TXD
  ARM: at91: at91sam9x5: fix usart3 pinctrl name
  ARM: EXYNOS: Fix crash on soft reset on EXYNOS5440
  ARM: dts: fix tick and alarm irq numbers for exynos5440
  ARM: dts: fix compatible value for exynos pinctrl
  ARM: dts: Fix compatible value of pinctrl module on EXYNOS5440
  ARM: S3C24XX: fix uninitialized variable warning
  mfd/vexpress: vexpress_sysreg_setup must not be __init
  ARM: ux500: Fix u9540 booting issues
  arm: mvebu: i2c come back in defconfig
  arm: plat-orion: fix printing of "MPP config unavailable on this hardware"
  Dove: activate GPIO interrupts in DT
  ARM: ux500: add spin_unlock(&master_lock).
  ARM: ux500: Disable Power Supply and Battery Management by default

Signed-off-by: Olof Johansson <olof@lixom.net>

This update adds a debugfs interface to modify a pin configuration
for a given state in the pinctrl map. This allows to modify the
configuration for a non-active state, typically sleep state.
This configuration is not applied right away, but only when the state
will be entered.

This solution is mandated for us by HW validation: in order
to test and verify several pin configurations during sleep without
recompiling the software.

Signed-off-by: Laurent Meunier <laurent.meunier@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>