Currently the provided initial value for bcm2835_gpio_direction_output
has no effect. So fix this issue by changing the value before
changing the GPIO direction. As a result we need to move the function below
bcm2835_gpio_set.

Suggested-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Fixes: e1b2dc70cd5b ("pinctrl: add bcm2835 driver")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The calculation equation of PAD_OWN register offset is not
correct for Broxton, verified this fix will get right
offset for Broxton.

Signed-off-by: Qi Zheng <qi.zheng@intel.com>
Signed-off-by: Qipeng Zha <qipeng.zha@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The group size for registers PADCFGLOCK, HOSTSW_OWN, GPI_IS,
GPI_IE, are not 24 for Broxton, Add a parameter to allow
different platform to set correct value.

Signed-off-by: Qi Zheng <qi.zheng@intel.com>
Signed-off-by: Qipeng Zha <qipeng.zha@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

To support i.MX7D Low Power State Retention IOMUXC, commit e7b37a522aa9
("pinctrl: freescale: imx: allow mux_reg offset zero") changes the way
of zero mux_reg offset support with a new flag ZERO_OFFSET_VALID.  But,
unfortunately, it forgot to add this flag for vf610 pinctrl which has
zero mux_reg offset be valid as well, and hence breaks the vf610
support.

Fix the regression by adding flag ZERO_OFFSET_VALID for vf610 pinctrl
driver.

Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fixes: e7b37a522aa9 ("pinctrl: freescale: imx: allow mux_reg offset zero")
Reported-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

When building for SH7734:

    drivers/pinctrl/sh-pfc/pfc-sh7734.c:586:1: error: macro "_GP_DATA" passed 5 arguments, but takes just 4
    drivers/pinctrl/sh-pfc/pfc-sh7734.c:586:2: error: '_GP_DATA' undeclared here (not in a function)
    drivers/pinctrl/sh-pfc/pfc-sh7734.c:586:1: error: macro "_GP_DATA" passed 5 arguments, but takes just 4
    drivers/pinctrl/sh-pfc/pfc-sh7734.c:586:1: error: macro "_GP_DATA" passed 5 arguments, but takes just 4
    ...
    drivers/pinctrl/sh-pfc/pfc-sh7734.c:2389:1: error: macro "_GP_INOUTSEL" passed 5 arguments, but takes just 4
    drivers/pinctrl/sh-pfc/pfc-sh7734.c:2389:53: error: '_GP_INOUTSEL' undeclared here (not in a function)
    drivers/pinctrl/sh-pfc/pfc-sh7734.c:2389:2: warning: initialization makes integer from pointer without a cast [enabled by default]
    drivers/pinctrl/sh-pfc/pfc-sh7734.c:2389:2: warning: (near initialization for '(anonymous)[0]') [enabled by default]
    ...
    drivers/pinctrl/sh-pfc/pfc-sh7734.c:2416:1: error: macro "_GP_INDT" passed 5 arguments, but takes just 4
    drivers/pinctrl/sh-pfc/pfc-sh7734.c:2416:47: error: '_GP_INDT' undeclared here (not in a function)
    drivers/pinctrl/sh-pfc/pfc-sh7734.c:2416:2: warning: initialization makes integer from pointer without a cast [enabled by default]
    drivers/pinctrl/sh-pfc/pfc-sh7734.c:2416:2: warning: (near initialization for '(anonymous)[0]') [enabled by default]
    ...

Add the missing "cfg" macro parameters to the sh7734-specific
_GP_DATA(), _GP_INOUTSEL(), and _GP_INDT() macros to fix this.

Fixes: 22768fc60abbf58b ("pinctrl: sh-pfc: Add macros defining GP ports with config flags")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Since Linux gpio framework return 0 for output, 1 for input.
But HW use 0 stands for input, and 1 stands for output.
So use negative to correct it.

And gpio_chip.get is used to get input value, no need to get
output value, so removing it.

Signed-off-by: Hongzhou Yang <hongzhou.yang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

When building pinctrl-ssbi-gpio and pinctrl-ssbi-mpp for ARM64, we get
a compile warning about invalid types:

drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c: In function 'pm8xxx_gpio_probe':
drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c:675:17: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c: In function 'pm8xxx_mpp_probe':
drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c:766:17: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]

This changes the code so we cast the pointer to 'unsigned long', which
is the right thing to do here.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

for_each_child_of_node performs an of_node_get on each iteration,
so of_node_put is required on break out of the loop.

This is done using Coccinelle. And semantic patch used for this is
as follows:

@@
expression root,e;
local idexpression child;
@@

 for_each_child_of_node(root, child) {
   ... when != of_node_put(child)
       when != e = child
(
   return child;
|
+  of_node_put(child);
?  return ...;
)
   ...
 }

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The whole menu is guarded by

  menu "Pin controllers"
          depends on PINCTRL
      ...
  endmenu

The if conditional outside of it is redundant.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Pull GPIO updates from Linus Walleij:
 "Here is the bulk of GPIO changes for the v4.4 development cycle.

  The only changes hitting outside drivers/gpio are in the pin control
  subsystem and these seem to have settled nicely in linux-next.

  Development mistakes and catfights are nicely documented in the
  reverts as you can see.  The outcome of the ABI fight is that we're
  working on a chardev ABI for GPIO now, where hope to show results for
  the v4.5 kernel.

  Summary of changes:

  GPIO core:
   - Define and handle flags for open drain/open collector and open
     source/open emitter, also know as "single-ended" configurations.
   - Generic request/free operations that handle calling out to the
     (optional) pin control backend.
   - Some refactoring related to an ABI change that did not happen, yet
     provide useful.
   - Added a real-time compliance checklist.  Many GPIO chips have
     irqchips, and need to think this over with the RT patches going
     upstream.
   - Restructure, fix and clean up Kconfig menus a bit.

  New drivers:
   - New driver for AMD Promony.
   - New driver for ACCES 104-IDIO-16, a port-mapped I/O card,
     ISA-style.  Very retro.

  Subdriver changes:
   - OMAP changes to handle real time requirements.
   - Handle trigger types for edge and level IRQs on PL061 properly.  As
     this hardware is very common it needs to set a proper example for
     others to follow.
   - Some container_of() cleanups.
   - Delete the unused MSM driver in favor of the driver that is
     embedded inside the pin control driver.
   - Cleanup of the ath79 GPIO driver used by many, many OpenWRT router
     targets.
   - A consolidated IT87xx driver replacing the earlier very specific
     IT8761e driver.
   - Handle the TI TCA9539 in the PCA953x driver.  Also handle ACPI
     devices in this subdriver.
   - Drop xilinx arch dependencies as these FPGAs seem to profilate over
     a few different architectures.  MIPS and ARM come to mind"

* tag 'gpio-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (57 commits)
  gpio: fix up SPI submenu
  gpio: drop surplus I2C dependencies
  gpio: drop surplus X86 dependencies
  gpio: dt-bindings: document the official use of "ngpios"
  gpio: MAINTAINERS: Add an entry for the ATH79 GPIO driver
  gpio / ACPI: Allow shared GPIO event to be read via operation region
  gpio: group port-mapped I/O drivers in a menu
  gpio: Add ACCES 104-IDIO-16 driver maintainer entry
  gpio: zynq: Document interrupt-controller DT binding
  gpio: xilinx: Drop architecture dependencies
  gpio: generic: Revert to old error handling in bgpio_map
  gpio: add a real time compliance notes
  Revert "gpio: add a real time compliance checklist"
  gpio: Add GPIO support for the ACCES 104-IDIO-16
  gpio: driver for AMD Promontory
  gpio: xlp: Convert to use gpiolib irqchip helpers
  gpio: add a real time compliance checklist
  gpio/xilinx: enable for MIPS
  gpiolib: Add and use OF_GPIO_SINGLE_ENDED flag
  gpiolib: Split GPIO flags parsing and GPIO configuration
  ...