linux-toradex.git/drivers/pinctrl, branch v4.4.158

pinctrl: qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant

2018-09-26T06:35:10+00:00

[ Upstream commit 1cf86bc21257a330e3af51f2a4e885f1a705f6a5 ]

If you do this on an sdm845 board:
  grep "" /sys/kernel/debug/pinctrl/*spmi:pmic*/pinconf-groups

...it looks like nonsense.  For every pin you see listed:
  input bias disabled, input bias high impedance, input bias pull down, input bias pull up, ...

That's because pmic_gpio_config_get() isn't complying with the rules
that pinconf_generic_dump_one() expects.  Specifically for boolean
parameters (anything with a "struct pin_config_item" where has_arg is
false) the function expects that the function should return its value
not through the "config" parameter but should return "0" if the value
is set and "-EINVAL" if the value isn't set.

Let's fix this.

>From a quick sample of other pinctrl drivers, it appears to be
tradition to also return 1 through the config parameter for these
boolean parameters when they exist.  I'm not one to knock tradition,
so I'll follow tradition and return 1 in these cases.  While I'm at
it, I'll also continue searching for four leaf clovers, kocking on
wood three times, and trying not to break mirrors.

NOTE: This also fixes an apparent typo for reading
PIN_CONFIG_BIAS_DISABLE where the old driver was accidentally
using "=" instead of "==" and thus was setting some internal
state when you tried to query PIN_CONFIG_BIAS_DISABLE.  Oops.

Fixes: eadff3024472 ("pinctrl: Qualcomm SPMI PMIC GPIO pin controller driver")
Signed-off-by: Douglas Anderson 
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

pinctrl: freescale: off by one in imx1_pinconf_group_dbg_show()

2018-09-05T07:18:39+00:00

commit 19da44cd33a3a6ff7c97fff0189999ff15b241e4 upstream.

The info->groups[] array is allocated in imx1_pinctrl_parse_dt().  It
has info->ngroups elements.  Thus the > here should be >= to prevent
reading one element beyond the end of the array.

Cc: stable@vger.kernel.org
Fixes: 30612cd90005 ("pinctrl: imx1 core driver")
Signed-off-by: Dan Carpenter 
Reviewed-by: Uwe Kleine-König 
Acked-by: Dong Aisheng 
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

pinctrl: at91-pio4: add missing of_node_put

2018-08-06T14:24:34+00:00

[ Upstream commit 21816364715f508c10da1e087e352bc1e326614f ]

The device node iterators perform an of_node_get on each iteration, so a
jump out of the loop requires an of_node_put.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// 
@@
expression root,e;
local idexpression child;
iterator name for_each_child_of_node;
@@

 for_each_child_of_node(root, child) {
   ... when != of_node_put(child)
       when != e = child
+  of_node_put(child);
?  break;
   ...
}
... when != child
// 

Signed-off-by: Julia Lawall 
Acked-by: Ludovic Desroches 
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

pinctrl: Really force states during suspend/resume

2018-03-24T09:58:48+00:00

[ Upstream commit 981ed1bfbc6c4660b2ddaa8392893e20a6255048 ]

In case a platform only defaults a "default" set of pins, but not a
"sleep" set of pins, and this particular platform suspends and resumes
in a way that the pin states are not preserved by the hardware, when we
resume, we would call pinctrl_single_resume() -> pinctrl_force_default()
-> pinctrl_select_state() and the first thing we do is check that the
pins state is the same as before, and do nothing.

In order to fix this, decouple the actual state change from
pinctrl_select_state() and move it pinctrl_commit_state(), while keeping
the p->state == state check in pinctrl_select_state() not to change the
caller assumptions. pinctrl_force_sleep() and pinctrl_force_default()
are updated to bypass the state check by calling pinctrl_commit_state().

[Linus Walleij]
The forced pin control states are currently only used in some pin
controller drivers that grab their own reference to their own pins.
This is equal to the pin control hogs: pins taken by pin control
devices since there are no corresponding device in the Linux device
hierarchy, such as memory controller lines or unused GPIO lines,
or GPIO lines that are used orthogonally from the GPIO subsystem
but pincontrol-wise managed as hogs (non-strict mode, allowing
simultaneous use by GPIO and pin control). For this case forcing
the state from the drivers' suspend()/resume() callbacks makes
sense and should semantically match the name of the function.

Fixes: 6e5e959dde0d ("pinctrl: API changes to support multiple states per device")
Signed-off-by: Florian Fainelli 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

pinctrl: sunxi: Fix A80 interrupt pin bank

2018-02-25T10:03:39+00:00

[ Upstream commit 6ad4cc8d1ac483e0fd33f605fb2788b0ecf51ed4 ]

On the A80 the pins on port B can trigger interrupts, and those are
assigned to the second interrupt bank.
Having two pins assigned to the same interrupt bank/pin combination does
not look healthy (instead more like a copy&paste bug from pins PA14-PA16),
so fix the interrupt bank for pins PB14-PB16, which is actually 1.

I don't have any A80 board, so could not test this.

Fixes: d5e9fb31baa2 ("pinctrl: sunxi: Add A80 pinctrl muxing options")
Signed-off-by: Andre Przywara 
Acked-by: Chen-Yu Tsai 
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

pinctrl: st: add irq_request/release_resources callbacks

2017-12-25T13:22:11+00:00

[ Upstream commit e855fa9a65c40788b5069abb0d094537daa22e05 ]

When using GPIO as IRQ source, the GPIO must be configured
in INPUT. Callbacks dedicated for this was missing in
pinctrl-st driver.

This fix the following kernel error when trying to lock a gpio
as IRQ:

[    7.521095] gpio gpiochip7: (PIO11): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ
[    7.526018] gpio gpiochip7: (PIO11): unable to lock HW IRQ 6 for IRQ
[    7.529405] genirq: Failed to request resources for 0-0053 (irq 81) on irqchip GPIO

Signed-off-by: Patrice Chotard 
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

pinctrl: adi2: Fix Kconfig build problem

2017-12-20T09:05:00+00:00

[ Upstream commit 1c363531dd814dc4fe10865722bf6b0f72ce4673 ]

The build robot is complaining on Blackfin:

drivers/pinctrl/pinctrl-adi2.c: In function 'port_setup':
>> drivers/pinctrl/pinctrl-adi2.c:221:21: error: dereferencing
   pointer to incomplete type 'struct gpio_port_t'
      writew(readw(®s->port_fer) & ~BIT(offset),
                        ^~
drivers/pinctrl/pinctrl-adi2.c: In function 'adi_gpio_ack_irq':
>> drivers/pinctrl/pinctrl-adi2.c:266:18: error: dereferencing
pointer to incomplete type 'struct bfin_pint_regs'
      if (readl(®s->invert_set) & pintbit)
                     ^~
It seems the driver need to include  and 
to compile.

The Blackfin architecture was re-defining the Kconfig
PINCTRL symbol which is not OK, so replaced this with
PINCTRL_BLACKFIN_ADI2 which selects PINCTRL and PINCTRL_ADI2
just like most arches do.

Further, the old GPIO driver symbol GPIO_ADI was possible to
select at the same time as selecting PINCTRL. This was not
working because the arch-local  header contains
an explicit #ifndef PINCTRL clause making compilation break
if you combine them. The same is true for DEBUG_MMRS.

Make sure the ADI2 pinctrl driver is not selected at the same
time as the old GPIO implementation. (This should be converted
to use gpiolib or pincontrol and move to drivers/...) Also make
sure the old GPIO_ADI driver or DEBUG_MMRS is not selected at
the same time as the new PINCTRL implementation, and only make
PINCTRL_ADI2 selectable for the Blackfin families that actually
have it.

This way it is still possible to add e.g. I2C-based pin
control expanders on the Blackfin.

Cc: Steven Miao 
Cc: Huanhuan Feng 
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

pinctrl: samsung: Remove bogus irq_[un]mask from resource management

2017-08-16T20:40:30+00:00

commit 3fa53ec2ed885b0aec3f0472e3b4a8a6f1cd748c upstream.

The irq chip callbacks irq_request/release_resources() have absolutely no
business with masking and unmasking the irq.

The core code unmasks the interrupt after complete setup and masks it
before invoking irq_release_resources().

The unmask is actually harmful as it happens before the interrupt is
completely initialized in __setup_irq().

Remove it.

Fixes: f6a8249f9e55 ("pinctrl: exynos: Lock GPIOs as interrupts when used as EINTs")
Signed-off-by: Thomas Gleixner 
Cc: Krzysztof Kozlowski 
Cc: Sylwester Nawrocki 
Cc: Linus Walleij 
Cc: Kukjin Kim 
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Acked-by: Tomasz Figa 
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

pinctrl: sunxi: add a missing function of A10/A20 pinctrl driver

2017-08-16T20:40:30+00:00

commit d81ece747d8727bb8b1cfc9a20dbe62f09a4e35a upstream.

The PH16 pin has a function with mux id 0x5, which is the DET pin of the
"sim" (smart card reader) IP block.

This function is missing in old versions of A10/A20 SoCs' datasheets and
user manuals, so it's also missing in the old drivers. The newest A10
Datasheet V1.70 and A20 Datasheet V1.41 contain this pin function, and
it's discovered during implementing R40 pinctrl driver.

Add it to the driver. As we now merged A20 pinctrl driver to the A10
one, we need to only fix the A10 driver now.

Fixes: f2821b1ca3a2 ("pinctrl: sunxi: Move Allwinner A10 pinctrl
driver to a driver of its own")

Signed-off-by: Icenowy Zheng 
Reviewed-by: Chen-Yu Tsai 
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

pinctrl: sh-pfc: Update info pointer after SoC-specific init

2017-07-15T09:57:46+00:00

commit 3091ae775fae17084013021d01513bc1ad274e6a upstream.

Update the sh_pfc_soc_info pointer after calling the SoC-specific
initialization function, as it may have been updated to e.g. handle
different SoC revisions.  This makes sure the correct subdriver name is
printed later.

Fixes: 0c151062f32c9db8 ("sh-pfc: Add support for SoC-specific initialization")
Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Greg Kroah-Hartman